产品详情

Architecture Current FB Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 1100 BW at Acl (MHz) 1100 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 2300 Vn at flatband (typ) (nV√Hz) 4.5 Vn at 1 kHz (typ) (nV√Hz) 7 Iq per channel (typ) (mA) 10.6 Vos (offset voltage at 25°C) (max) (mV) 1 Features Integrated Multiplexer, Shutdown Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Input bias current (max) (pA) 20000000 Offset drift (typ) (µV/°C) 30 Iout (typ) (mA) 75 2nd harmonic (dBc) 60 3rd harmonic (dBc) 78 Frequency of harmonic distortion measurement (MHz) 10
Architecture Current FB Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 7 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 12 GBW (typ) (MHz) 1100 BW at Acl (MHz) 1100 Acl, min spec gain (V/V) 1 Slew rate (typ) (V/µs) 2300 Vn at flatband (typ) (nV√Hz) 4.5 Vn at 1 kHz (typ) (nV√Hz) 7 Iq per channel (typ) (mA) 10.6 Vos (offset voltage at 25°C) (max) (mV) 1 Features Integrated Multiplexer, Shutdown Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Input bias current (max) (pA) 20000000 Offset drift (typ) (µV/°C) 30 Iout (typ) (mA) 75 2nd harmonic (dBc) 60 3rd harmonic (dBc) 78 Frequency of harmonic distortion measurement (MHz) 10
SOIC (D) 14 51.9 mm² 8.65 x 6
  • 500-MHz Small-Signal Bandwidth
  • 500-MHz, 2-VPP Bandwidth
  • 0.1-dB Gain Flatness to 120 MHz
  • 10-ns Channel-Switching Time
  • Low Switching Glitch: 40 mVPP
  • 2300-V/µs Slew Rate
  • 0.035%/0.005° Differential Gain, Phase
  • Quiescent Current = 10.6 mA
  • 1.1-mA Quiescent Current in Shutdown Mode
  • 88-dB Off Isolation in Disable or Shutdown
    (10 MHz)
  • APPLICATIONS
    • Video Router
    • LCD and Plasma Display
    • High Speed PGA
    • Drop-In Upgrade to AD8174
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–55°C/125°C), Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability

(1) Additional temperature ranges available - contact factory
All other trademarks are the property of their respective owners.

  • 500-MHz Small-Signal Bandwidth
  • 500-MHz, 2-VPP Bandwidth
  • 0.1-dB Gain Flatness to 120 MHz
  • 10-ns Channel-Switching Time
  • Low Switching Glitch: 40 mVPP
  • 2300-V/µs Slew Rate
  • 0.035%/0.005° Differential Gain, Phase
  • Quiescent Current = 10.6 mA
  • 1.1-mA Quiescent Current in Shutdown Mode
  • 88-dB Off Isolation in Disable or Shutdown
    (10 MHz)
  • APPLICATIONS
    • Video Router
    • LCD and Plasma Display
    • High Speed PGA
    • Drop-In Upgrade to AD8174
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–55°C/125°C), Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability

(1) Additional temperature ranges available - contact factory
All other trademarks are the property of their respective owners.

The OPA4872 offers a very wideband 4:1 multiplexer in an SO-14 package. Using only 10.6 mA, the OPA4872 provides a user-settable output amplifier gain with greater than 500-MHz large-signal bandwidth (2 VPP). The switching glitch is improved over earlier solutions using a new (patented) input stage switching approach. This technique uses current steering as the input switch while maintaining an overall closed-loop design. The OPA4872 exhibits an off isolation of 88dB in either Disable or Shutdown mode. With greater than 500-MHz small-signal bandwidth at a gain of 2, the OPA4872 gives a typical 0.1-dB gain flatness to greater than 120 MHz.

System power may be optimized using the chip-enable feature for the OPA4872. Taking the chip enable (EN) line high powers down the OPA4872 to less than 3.4 mA total supply current. Further power reduction to 1.1mA quiescent current can be achieved by bringing the shutdown (SD) line high. Muxing multiple OPA4872s outputs together, then using the chip enable to select which channels are active, increases the number of possible inputs.

The OPA4872 offers a very wideband 4:1 multiplexer in an SO-14 package. Using only 10.6 mA, the OPA4872 provides a user-settable output amplifier gain with greater than 500-MHz large-signal bandwidth (2 VPP). The switching glitch is improved over earlier solutions using a new (patented) input stage switching approach. This technique uses current steering as the input switch while maintaining an overall closed-loop design. The OPA4872 exhibits an off isolation of 88dB in either Disable or Shutdown mode. With greater than 500-MHz small-signal bandwidth at a gain of 2, the OPA4872 gives a typical 0.1-dB gain flatness to greater than 120 MHz.

System power may be optimized using the chip-enable feature for the OPA4872. Taking the chip enable (EN) line high powers down the OPA4872 to less than 3.4 mA total supply current. Further power reduction to 1.1mA quiescent current can be achieved by bringing the shutdown (SD) line high. Muxing multiple OPA4872s outputs together, then using the chip enable to select which channels are active, increases the number of possible inputs.

下载

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相似
LMH6628QML 正在供货 双路宽带、低噪声、电压反馈运算放大器 Dual channel, extended temperature range (-55°C) and wide bandwidth (300MHz)

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 1
类型 标题 下载最新的英语版本 日期
* 数据表 4:1 High-Speed Multiplexer 数据表 2008年 12月 2日

订购和质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息:
  • 制造厂地点
  • 封装厂地点

支持和培训