OPA1655
- Ultra-low noise:
- Voltage noise: 2.9 nV/√Hz at 10 kHz
- Current noise: 6 fA/√Hz at 1 kHz
- Low distortion:
- 0.000029% (–131 dB) at 1 kHz
- 0.000035% (–129 dB) at 20 kHz
- High open-loop gain: 150 dB
- High output current: 100 mA
- Low input bias current: 10 pA
- Slew rate: 24 V/µs
- Gain bandwidth product: 53 MHz
- Rail-to-rail output
- Wide supply range: ±2.25 V to ±18 V or 4.5 V to 36 V
- Quiescent current: 3.9 mA per channel
The OPA1655 and OPA1656 (OPA165x) are Burr-Brown™ op amps designed specifically for audio and industrial applications, where maintaining signal fidelity is crucial. The FET-input architecture achieves a low 2.9‑nV/√Hz voltage noise density and 6‑fA/√Hz current noise density, allowing for very-low noise performance in a wide variety of circuits. The high bandwidth and high open-loop-gain design of the OPA165x delivers a low distortion of 0.000035% (–129 dB) at 20 kHz, and improves audio signal fidelity across the full audio bandwidth. These devices also feature excellent output current drive capability, offering rail-to-rail output swing to within 250 mV of the power supplies with a 2‑kΩ load, and can deliver 100 mA of output current.
The OPA165x operate over a very wide supply range of ±2.25 V to ±18 V or (4.5 V to 36 V) on 3.9 mA of supply current to accommodate the power-supply constraints of many types of audio products. The temperature range is specified from –40°C to +125°C.
技术文档
类型 | 项目标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | OPA165x Ultra-Low-Noise, Low-Distortion, FET-Input, Burr-Brown™ Audio Operational Amplifiers 数据表 (Rev. B) | PDF | HTML | 15 Dec 2021 | ||
应用手册 | 376-pin column grid array temperature cycle report final | PDF | HTML | 14 Jun 2021 | |||
白皮书 | Audio Innovation: Trends in Automotive, Smart Home and Pro Audio Applications | 21 Aug 2019 | ||||
技术文章 | No headroom, no problem: buffering and filtering an audio signal chain in low-voltage systems | 11 Apr 2019 | ||||
技术文章 | Amp up your cans: Is your op amp stable? (Part 2) | 22 Jan 2016 | ||||
技术文章 | Stress-induced outbursts: Microphonics in ceramic capacitors (Part 2) | 23 Dec 2014 | ||||
技术文章 | Stress-induced outbursts: Microphonics in ceramic capacitors (Part 1) | 19 Dec 2014 | ||||
应用手册 | 所选封装材料的热学和电学性质 | 16 Oct 2008 | ||||
应用手册 | 高速数据转换 | 下载英文版本 | 16 Oct 2008 | |||
应用手册 | 用直观方式补偿互阻抗放大器 (Rev. A) | 下载英文版本 (Rev.A) | 07 Nov 2005 |
设计和开发
如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。
DIP-ADAPTER-EVM — DIP 适配器评估模块
借助 DIP-Adapter-EVM 加快运算放大器的原型设计和测试,该 EVM 有助于快速轻松地连接小型表面贴装 IC 并且价格低廉。您可以使用随附的 Samtec 端子板连接任何受支持的运算放大器,或者将这些端子板直接连接至现有电路。
DIP-Adapter-EVM 套件支持六种常用的业界通用封装,包括:
- D 和 U (SOIC-8)
- PW (TSSOP-8)
- DGK(MSOP-8、VSSOP-8)
- DBV(SOT23-6、SOT23-5 和 SOT23-3)
- DCK(SC70-6 和 SC70-5)
- DRL (SOT563-6)
DIYAMP-EVM — 通用自制 (DIY) 放大器电路评估模块
DIYAMP-EVM 系列可实现快速、方便的原型设计,并且使用常用的 0805 或 0603 表面贴装式组件。通过配置多个组合,EVM 使您能够构建广泛的评估电路,从简单的放大器电路到复杂的信号链。所有 EVM 均与试验电路板、超小型 A 版 (...)
PSPICE-FOR-TI 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
TINA-TI 基于 SPICE 的模拟仿真程序
TINA-TI 安装需要大约 500MB。直接安装,如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表,请参阅:SpiceRack - 完整列表
需要 HSpice (...)
ANALOG-ENGINEER-CALC 模拟工程师计算器
封装 | 引脚数 | 下载 |
---|---|---|
SOIC (D) | 8 | 了解详情 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 认证摘要
- 持续可靠性监测