主页 电源管理 多通道 IC (PMIC)
主页
电源管理
多通道 IC (PMIC)

LP3913

不推荐用于新设计

面向基于闪存的便携式媒体播放器的电源管理 IC (PMIC)

立即订购
数据表
LP3913 不推荐用于新设计
该产品会持续为现有客户提供。新设计应考虑替代产品。
open-in-new 比较替代产品
功能与比较器件相同，且具有相同引脚
LP3910 正在供货 面向基于硬盘的便携式媒体播放器的电源管理 IC (PMIC) PMIC for hard-drive based portable media players with advanced battery management functions.

LP3913

不推荐用于新设计
数据表 立即订购

产品详情

Vin (min) (V) 2.5 Vin (max) (V) 6 Vout (min) (V) 0.8 Vout (max) (V) 3.3 Iout (max) (A) 0.6 Features Comm control, Power sequencing Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (mA) 0.03 Switching frequency (max) (kHz) 2000
Vin (min) (V) 2.5 Vin (max) (V) 6 Vout (min) (V) 0.8 Vout (max) (V) 3.3 Iout (max) (A) 0.6 Features Comm control, Power sequencing Rating Catalog Operating temperature range (°C) -40 to 85 Iq (typ) (mA) 0.03 Switching frequency (max) (kHz) 2000
WQFN (NJV) 48 36 mm² 6 x 6
  • 2 Low-Dropout Regulators -- LDO1 is Used for General Purpose Applications, LDO2 is Used for Low-Noise Analog Applications. Both LDOs Have Programmable Output Voltages.
  • Green and Red LED Charger Status Drivers
  • 4-Channel 8-Bit Dual Slope A/D Converter
  • 3 High-Efficiency DVS Buck Converters
  • 400 kHz I2C Compatible Interface
  • Linear Constant-Current/Constant-Voltage Charger for Single Cell Lithium-Ion Batteries
  • USB and Adapter Charging
  • System Power Supply Management
  • 6x6 x 0.8 mm 48 WQFN Package
  • Voltage and Thermal Supervisory Circuits
  • Continuous Battery Voltage Monitoring
  • Interrupt Request Output with 8 Sources
  • LP3913 is Pin for Pin and Software Compatible with the LP3910 Hard Drive Based PMIC

Key Specifications

  • LDO1: 150 mA, 1.2V–3.3V
  • LDO2: 150 mA, 1.3V–3.3V
  • Buck1: 600 mA, 0.8V–2.0V
  • Buck2: 600 mA, 1.8V–3.3V
  • Buck3: 500 mA, 1.8V–3.3V
  • 50 mΩ Battery Path Resistance
  • 100 mA–1000 mA Full-Rate Charge Current Using Wall Adapter
  • Selectable 0.05C and 0.1C EOC Current
  • USB Current Limit of 100 mA, 500 mA, and 800 mA
  • USB Pre-Qual Current of 50 mA
  • Selectable 4.1V, 4.2V or 4.38V battery termination voltages
  • 0.35% Battery Termination Accuracy
  • ±1 LSB INL/DNL on 8-bit A/D Converter

All trademarks are the property of their respective owners.

  • 2 Low-Dropout Regulators -- LDO1 is Used for General Purpose Applications, LDO2 is Used for Low-Noise Analog Applications. Both LDOs Have Programmable Output Voltages.
  • Green and Red LED Charger Status Drivers
  • 4-Channel 8-Bit Dual Slope A/D Converter
  • 3 High-Efficiency DVS Buck Converters
  • 400 kHz I2C Compatible Interface
  • Linear Constant-Current/Constant-Voltage Charger for Single Cell Lithium-Ion Batteries
  • USB and Adapter Charging
  • System Power Supply Management
  • 6x6 x 0.8 mm 48 WQFN Package
  • Voltage and Thermal Supervisory Circuits
  • Continuous Battery Voltage Monitoring
  • Interrupt Request Output with 8 Sources
  • LP3913 is Pin for Pin and Software Compatible with the LP3910 Hard Drive Based PMIC

Key Specifications

  • LDO1: 150 mA, 1.2V–3.3V
  • LDO2: 150 mA, 1.3V–3.3V
  • Buck1: 600 mA, 0.8V–2.0V
  • Buck2: 600 mA, 1.8V–3.3V
  • Buck3: 500 mA, 1.8V–3.3V
  • 50 mΩ Battery Path Resistance
  • 100 mA–1000 mA Full-Rate Charge Current Using Wall Adapter
  • Selectable 0.05C and 0.1C EOC Current
  • USB Current Limit of 100 mA, 500 mA, and 800 mA
  • USB Pre-Qual Current of 50 mA
  • Selectable 4.1V, 4.2V or 4.38V battery termination voltages
  • 0.35% Battery Termination Accuracy
  • ±1 LSB INL/DNL on 8-bit A/D Converter

All trademarks are the property of their respective owners.

The LP3913 is a programmable system power management unit that is optimized for Flash Memory based Portable Media Players.

The LP3913 incorporates 2 low-dropout LDO voltage regulators, 3 integrated Buck DC/DC converters with Dynamic Voltage Scaling (DVS), a 4-channel 8-bit A/D converter, and a dual source Li-Ion/polymer battery charger. The charger has the capability to charge and maintain a single cell battery from a regulated wall adapter or USB power. When both USB and adapter sources are present, then the adapter source takes precedence and switching between USB and adapter power sources is seamless. In addition, the battery charger supports power routing, which allows system usage immediately after an external power source has been detected. The LP3913 also incorporates some advanced battery management functions such as battery temperature measurement, reverse current blocking for USB, LED charger status indication, thermally regulated internal power FETs, battery voltage monitoring, over-current protection and a 10–hour safety timer.

The 4-channel A/D converter measures the battery voltage and charge current, which can be used for fuel gauging. Two undedicated channels can be used to measure other analog parameters such as discharge current, battery temperature, keyboard resistor scanning and more.

The various IC parameters are programmable through a 400 kHz I2C compatible interface.

The LP3913 is available in a thermally-enhanced 6x6x0.8 mm 48 WQFN package and operates over an ambient temperature range of –40°C to +85°C.

The LP3913 is a programmable system power management unit that is optimized for Flash Memory based Portable Media Players.

The LP3913 incorporates 2 low-dropout LDO voltage regulators, 3 integrated Buck DC/DC converters with Dynamic Voltage Scaling (DVS), a 4-channel 8-bit A/D converter, and a dual source Li-Ion/polymer battery charger. The charger has the capability to charge and maintain a single cell battery from a regulated wall adapter or USB power. When both USB and adapter sources are present, then the adapter source takes precedence and switching between USB and adapter power sources is seamless. In addition, the battery charger supports power routing, which allows system usage immediately after an external power source has been detected. The LP3913 also incorporates some advanced battery management functions such as battery temperature measurement, reverse current blocking for USB, LED charger status indication, thermally regulated internal power FETs, battery voltage monitoring, over-current protection and a 10–hour safety timer.

The 4-channel A/D converter measures the battery voltage and charge current, which can be used for fuel gauging. Two undedicated channels can be used to measure other analog parameters such as discharge current, battery temperature, keyboard resistor scanning and more.

The various IC parameters are programmable through a 400 kHz I2C compatible interface.

The LP3913 is available in a thermally-enhanced 6x6x0.8 mm 48 WQFN package and operates over an ambient temperature range of –40°C to +85°C.
filter 查找其他 多通道 IC (PMIC)
下载

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 1
类型 标题 下载最新的英语版本 日期
* 数据表 LP3913 Power Management IC for Flash Memory Based Portable Media Players 数据表 (Rev. I) 2013年 9月 12日

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点