LP2987

正在供货

具有电源正常指示和使能功能的 200mA、16V、低压降稳压器

立即订购

数据表

document-pdfAcrobat LP2987/88 Micropwr, 200mA Ultra Low-Drpout Vreg w/Prog Pwr-On Rst Delay Low-N 数据表 (Rev. J) (英语)

可提供此产品的更新版本

open-in-new

比较替代产品

功能与比较器件相同但引脚有所不同

TPS7A24

正在供货

具有使能功能的 200mA、18V、超低 IQ、低压降 (LDO) 稳压器 Better PSRR

TPS7A25

正在供货

具有电源正常指示功能的 300mA、18V、超低 IQ、高精度、可调节低压降稳压器 Alternative product offering lower-IQ and higher accuracy in a 2x2 WSON package

LP2987

正在供货

数据表

立即订购

产品详情

Output options

Fixed Output

Iout (max) (A)

0.2

Vin (max) (V)

Vin (min) (V)

2.1

Vout (max) (V)

Vout (min) (V)

Fixed output options (V)

3, 3.3, 5

Noise (µVrms)

100

Iq (typ) (mA)

0.1

Thermal resistance θJA (°C/W)

160

Rating

Catalog

Load capacitance (min) (µF)

4.7

Regulated outputs (#)

Features

Enable, Power good

Accuracy (%)

PSRR at 100 KHz (dB)

Dropout voltage (Vdo) (typ) (mV)

180

Operating temperature range (°C)

-40 to 125

Output options

Fixed Output

Iout (max) (A)

0.2

Vin (max) (V)

Vin (min) (V)

2.1

Vout (max) (V)

Vout (min) (V)

Fixed output options (V)

3, 3.3, 5

Noise (µVrms)

100

Iq (typ) (mA)

0.1

Thermal resistance θJA (°C/W)

160

Rating

Catalog

Load capacitance (min) (µF)

4.7

Regulated outputs (#)

Features

Enable, Power good

Accuracy (%)

PSRR at 100 KHz (dB)

Dropout voltage (Vdo) (typ) (mV)

180

Operating temperature range (°C)

-40 to 125

SOIC (D)

29.4 mm² 4.9 x 6

VSSOP (DGK)

14.7 mm² 3 x 4.9

WSON (NGN)

16 mm² 4 x 4

Ultra Low Dropout Voltage
Power-ON Reset Delay Requires Only One Component
Bypass Pin for Reduced Output Noise (LP2988)
Specified Continuous Output Current 200 mA
Specified Peak Output Current > 250 mA
SOIC-8 and VSSOP-8 Surface Mount Packages
<2 μA Quiescent Current when Shutdown
Low Ground Pin Current at All Loads
0.5% Output Voltage Accuracy (“A” Grade)
Wide Supply Voltage Range (16V Max)
Overtemperature/overcurrent Protection
−40°C to +125°C Junction Temperature Range

All trademarks are the property of their respective owners.

Ultra Low Dropout Voltage
Power-ON Reset Delay Requires Only One Component
Bypass Pin for Reduced Output Noise (LP2988)
Specified Continuous Output Current 200 mA
Specified Peak Output Current > 250 mA
SOIC-8 and VSSOP-8 Surface Mount Packages
<2 μA Quiescent Current when Shutdown
Low Ground Pin Current at All Loads
0.5% Output Voltage Accuracy (“A” Grade)
Wide Supply Voltage Range (16V Max)
Overtemperature/overcurrent Protection
−40°C to +125°C Junction Temperature Range

All trademarks are the property of their respective owners.

The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.

The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.

Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:

Dropout Voltage: 180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).

Ground Pin Current: 1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).

Sleep Mode: The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.

Error Flag/Reset: The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.

Precision Output: Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% (“A” grade) and 1% (standard grade) at room temperature.

The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.

The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.

Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:

Dropout Voltage: 180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).

Ground Pin Current: 1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).

Sleep Mode: The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.

Error Flag/Reset: The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.

filter

查找其他线性和低压降 (LDO) 稳压器

下载观看带字幕的视频视频