LMR64010
- Input Voltage Range of 2.7V to 14V
- Output Voltage up to 40V
- Switch Current up to 1A
- 1.6 MHz Switching Frequency
- Low Shutdown Iq, <1 µA
- Cycle-by-Cycle Current Limiting
- Internally Compensated
- SOT-23-5 Packaging (2.92 x 2.84 x 1.08mm)
- Fully Enabled for WEBENCH® Power Designer
Performance Benefits
- Extremely Easy to Use
- Tiny Overall Solution Reduces System Cost
All trademarks are the property of their respective owners.
The LMR64010 switching regulators is a current-mode boost converter operating at a fixed frequency of 1.6 MHz.
The use of SOT-23 package, made possible by the minimal power loss of the internal 1A switch, and use of small inductors and capacitors result in the industry's highest power density. The 40V internal switch makes these solutions perfect for boosting to voltages of 16V or greater.
These parts have a logic-level shutdown pin that can be used to reduce quiescent current and extend battery life.
Protection is provided through cycle-by-cycle current limiting and thermal shutdown. Internal compensation simplifies design and reduces component count.
技术文档
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
LMR64010XMFDEMO — 采用 SOT-23 封装的 LMR64010 SIMPLE SWITCHER® 40V 输出电压、1A 升压稳压器演示板
The LMR62014 and LMR64010 are high frequency switching boost regulators which offer small size and high power conversion efficiency. The parts operate at a 1.6MHz switching frequency. The primary difference between the LMR62014 and LMR64010 is that the LMR62014 has a higher current internal switch (...)
PMP22339 — 适用于服务器电池备用充电的高电压 800W SEPIC 转换器参考设计
TIDA-01393 — 适用于 Xilinx® Zynq® UltraScale+™ MPSoC 应用的电源参考设计
此参考设计是一个可配置的电源解决方案，设计用于在各种用例中为 Xilinx® Zynq® UltraScale+ (ZU+) 全系列 MPSoC 器件供电。
TPS65086x PMIC 拥有各种版本，因而此设计能够为从具有双核 Arm® Cortex®-A53 应用处理器和双核 Arm Cortex-R5 实时处理器的基本 ZU2CG 器件到更高端的 ZU7EV、ZU19EG 和 ZU21DR 器件供电，这些器件可向 MPSoC 添加其他元件，例如图形处理单元、视频编解码器单元，以及多达 16 个 16.3Gbps 收发器。
此设计包括众多其他可与 TPS65086x (...)
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。