LMH6525
- Fast Switching: Rise and Fall Times: 0.6/1.0 ns.
- Low Voltage Differential Signaling (LVDS) Channels Enable Interface for the Fast Switching Lines
- Low Output Current Noise: 0.24 nA/√Hz
- Dual Output: Selectable by SELA/B Pin (Active HIGH)
- SELA = LMH6526 SEB = LMH6525
- Four Independent Current Channels
- Gain of 300, 300 mA Write Channel
- Gain of 150, 150 mA Low-Noise Read Channel
- Two Gain of 150, 150 mA Write Channels
- 600 mA Minimum Combined Output Current
- Integrated AC Coupled HFM Oscillator
- Selectable Frequency and Amplitude Setting
- By External Resistors
- 200 MHz to 600 MHz Frequency Range
- Amplitude to 100 mA Peak-to-Peak Modulation
- Complete Shutdown by ENABLE Pin
- 5V Single-Supply Operation
- Logic inputs TTL and CMOS compatible
- Space Saving Package (OFN)
- LMH6525 has Differential Enable Oscillator Inputs
- LMH6526 has Single Ended Enable Oscillator Inputs
All trademarks are the property of their respective owners.
The LMH6525/6526 is a laser diode driver for use in combination DVD/CD recordable and rewritable systems. The part contains two high-current outputs for reading and writing the DVD (650 nm) and CD (780 nm) lasers. Functionality includes read, write and erase through four separate switched current channels. The channel currents are summed together at the selected output to generate multilevel waveforms for reading, writing and erasing of optical discs. The LVDS interface delivers DVD write speeds of 16x and higher while minimizing noise and crosstalk. The LMH6525/6526 is optimized for both speed and power consumption to meet the demands of next generation systems. The part features a 150 mA read channel plus one 300 mA and two 150 mA write channels, which can be summed to allow a total output current of 600 mA or greater. The channel currents are set through four independent current inputs.
An on-board High-Frequency Modulator (HFM) oscillator helps reduce low-frequency noise of the laser and is enabled by applying LVDS levels on the ENOSC pins for the LMH6525, while the LMH6526 is enabled by applying an asymmetrical signal on the ENOSC pin. The fully differential oscillator circuit minimizes supply line noise, easing FCC approval of the overall system. The SELA/B pin (active HIGH) selects the output channel and oscillator settings. External resistors determine oscillator frequency and amplitude for each setting. The write and erase channels can be switched on and off through dedicated LVDS interface pins.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | LMH6525/LMH6526 Four–Channel Laser Diode Driver with Dual Output 数据表 (Rev. B) | 2013年 3月 18日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
TINA-TI — 基于 SPICE 的模拟仿真程序
TINA-TI 安装需要大约 500MB。直接安装,如果想卸载也很容易。我们相信您肯定会爱不释手。
TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。
如需获取可用 TINA-TI 模型的完整列表,请参阅:SpiceRack - 完整列表
需要 HSpice (...)
封装 | 引脚 | 下载 |
---|---|---|
UQFN (NJD) | 28 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点