返回页首

产品详细信息

参数

Number of channels (#) 4 Total supply voltage (Max) (+5V=5, +/-5V=10) 13 Total supply voltage (Min) (+5V=5, +/-5V=10) 5 Rail-to-rail In, Out GBW (Typ) (MHz) 15.4 Slew rate (Typ) (V/us) 15 Vos (offset voltage @ 25 C) (Max) (mV) 4 Iq per channel (Typ) (mA) 0.78 Vn at 1 kHz (Typ) (nV/rtHz) 23 Rating Catalog Operating temperature range (C) -40 to 85 Offset drift (Typ) (uV/C) 5 Features High Cload Drive Input bias current (Max) (pA) 1000000 CMRR (Typ) (dB) 103 Output current (Typ) (mA) 75 Architecture Bipolar open-in-new 查找其它 通用 运算放大器

封装|引脚|尺寸

SOIC (D) 14 52 mm² 8.65 x 6 TSSOP (PW) 14 32 mm² 5 x 6.4 open-in-new 查找其它 通用 运算放大器

特性

  • (VS = 5V, TA = 25°C Typical Values Unless Specified)
  • Input Common Mode Voltage 0.5V Beyond Rails
  • Output Voltage Swing (RL = 2kΩ) 50mV from Rails
  • Output Short Circuit Current +310/−410mA
  • Continuous Output Current 75mA
  • Supply Current (Per Amp, No Load) 750μA
  • Supply Voltage Range 5V to 13V
  • Unity Gain Stable
  • −3dB Bandwidth (AV = +1) 24MHz
  • Slew Rate 11V/μSec
  • Settling Time 270ns
  • SOIC and TSSOP Package
  • Manufactured in Texas Instruments' State-of-the-Art Bonded Wafer, Trench Isolated Complementary Bipolar VIP10 Technology for High Performance at Low Power Levels

open-in-new 查找其它 通用 运算放大器

描述

The LM6584 is a low power, high voltage, rail-to-rail input-output amplifier ideally suited for LCD panel VCOM driver and gamma buffer applications. The LM6584 contains four unity gain stable amplifiers in one package. It provides a common mode input ability of 0.5V beyond the supply rails, as well as an output voltage range that extends to within 50mV of either supply rail. With these capabilities, the LM6584 provides maximum dynamic range at any supply voltage. Operating on supplies ranging from 5V to 13V, while consuming only 750μA per amplifier, the LM6584 has a bandwidth of 24MHz (−3dB).

The LM6584 also features fast slewing and settling times, along with a high continuous output capability of 75mA. This output stage is capable of delivering approximately 310mA peak currents in order to charge or discharge capacitive loads. These features are ideal for use in TFT-LCDs.

The LM6584 is available in the industry standard 14-pin SOIC package and in the space-saving 14-pin TSSOP package. The amplifiers are specified for operation over the full −40°C to +85°C temperature range.

open-in-new 查找其它 通用 运算放大器
下载

技术文档

= 特色
未找到结果。请清除搜索,并重试。 查看所有 5
类型 标题 下载最新的英文版本 发布
* 数据表 LM6584 TFT-LCD Quad, 13V RRIO High Output Current Op Amp 数据表 2013年 3月 15日
技术文章 What is an op amp? 2020年 1月 21日
技术文章 Designing tiny microphone circuits with the industry’s smallest op amp 2018年 4月 12日
技术文章 How to lay out a PCB for high-performance, low-side current-sensing designs 2018年 2月 6日
技术文章 Low-side current sensing for high-performance cost-sensitive applications 2018年 1月 22日

设计与开发

有关其他条款或所需资源,请点击下面的任何链接来查看详情页面。

硬件开发

评估板 下载
document-generic 用户指南
$10.00
说明

National Semiconductor offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 14-Pin TSSOP package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit (...)

特性
  • Accommodates various high-speed Op Amp
  • Allows quick and easy evaluation
  • Serves as reference design to aid in high-speed PCB layout
  • Utilizes surface-mount components

 

评估板 下载
document-generic 用户指南
$10.00
说明

National Semiconductor offers this unpopulated Evaluation Board to aid in the evaluation and testing of high-speed Op Amp that are offered in the 14-Pin SOIC package. Resistors, capacitors, or any other surface-mount components can be easily mounted on this board in the desired circuit (...)

特性
  • Accommodates various high-speed Op Amp
  • Allows quick and easy evaluation
  • Serves as reference design to aid in high-speed PCB layout
  • Utilizes surface-mount components

 

评估板 下载
document-generic 用户指南
说明

The Universal OPAMPEVM is a series of general purpose blank circuit boards that simplify prototyping circuits for a variety of IC package types. The evaluation module board design allows many different circuits to be constructed easily and quickly. Five models are offered with each targeted for (...)

设计工具和仿真

仿真工具 下载
document-generic 用户指南 document-generic 下载英文版本 (Rev.A)
计算工具 下载
模拟工程师计算器
ANALOG-ENGINEER-CALC — 模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
特性
  • 通过模数转换器 (ADC) 和数模转换器 (DAC) 加快电路设计
    • 噪声计算
    • 常见单位转换
  • 解决常见的放大器电路设计问题
    • 使用标准电阻器进行增益选择
    • 滤波器配置
    • 常见放大器配置的总噪声
  • 执行 PCB 寄生计算(例如 R、L 和 C)
  • 查找常见传感器的传感器输出值(例如 RTD、热电偶)
  • 解决常见无源电路问题(例如使用无源组件的分压器)

CAD/CAE 符号

封装 引脚 下载
SOIC (D) 14 了解详情
TSSOP (PW) 14 了解详情

订购与质量

支持与培训

可获得 TI E2E™ 论坛的工程师技术支持

所有内容均由 TI 和社区网友按“原样”提供,并不构成 TI 规范。参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持