INA951-SP
- QML Class-P Radiation Hardness Assured (QMLP-RHA) grade
- Radiation - Total
Ionizing Dose (TID):
- TID performance assurance up to 50krad(Si)
- Radiation Lot Acceptance Testing (RLAT) for every wafer lot up to 50krad(Si)
- Radiation - Single-Event Effects (SEE):
- Single Event Latch-Up (SEL) immune up to 75MeV-cm2 /mg at 125°C
- Single Event Transient (SET) characterized up to LET = 75MeV-cm2 /mg
- Supports defense,
aerospace, and medical applications
- Operating temperature from –55°C to +125°C
- Controlled baseline
- Au bondwire and NiPdAu lead finish
- Outgassing test performed per ASTM E595
- One fabrication, assembly, and test site
- Extended product life cycle
- Product traceability
- Wide common-mode voltage:
- Operational voltage: −4V to +80V
- Survival voltage: −20V to +85V
- Excellent CMRR:
- 160dB DC-CMRR
- 85dB AC-CMRR at 50kHz
- Accuracy:
- Gain:
- Gain error: ±0.15% (maximum)
- Gain drift: ±10ppm/ °C (maximum)
- Offset:
- Offset voltage: ±30µV (typical)
- Offset drift: ±0.05µV/ °C (typical)
- Gain:
- Available gain:
- INA951-SPA1, : 20V/V
- High bandwidth: 1.3MHz
- Slew rate: 2.5V/µs
- Quiescent current: 1.5mA
The INA951-SP is a current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from –4V to 80V. The negative common-mode voltage allows the device to operate below ground, thus accommodating precise measurement of recirculating currents in half-bridge applications. The combination of a low offset voltage, small gain error and high DC CMRR enables highly accurate current measurement. The INA951-SP is not only designed for DC current measurement, but also for high-speed applications (for example, fast over-current protection) with a high bandwidth of 1.3MHz and an 85dB AC CMRR (at 50kHz).
The INA951-SP operates from a single 2.7V to 5.5V supply, drawing 1.5mA of supply current. The INA951-SP is available with a gain option of 20V/V.
The INA951-SP is specified over an operating temperature range of −55°C to +125°C and is offered in a space-saving SOT-23 package.
设计与开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
模拟工程师计算器旨在加快模拟电路设计工程师经常运用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算列表,从使用反馈电阻器设置运算放大器增益到选择合适的电路设计元件,以稳定模数转换器 (ADC) 驱动器缓冲器电路。
除了可用作独立工具之外,该计算器还能很好地与模拟工程师口袋参考中所述的概念配合使用。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 5 | Ultra Librarian |