主页 放大器 差分放大器
主页
放大器
差分放大器

INA159-EP

正在供货

0.2 增益电平转换差分放大器（增强型产品）

立即订购
数据表

INA159-EP

正在供货
数据表 立即订购

产品详情

Number of channels 1 Vs (min) (V) 1.8 Vs (max) (V) 5.5 CMRR (min) (dB) 86 Common-mode input low (min) (V) -12.5 Common-mode input high (max) (V) 17.5 Input offset (±) (max) (V) 0.0005 Iq (typ) (mA) 1.1 Slew rate (typ) (V/µs) 15 Voltage gain (min) (V/V) 0.2 Voltage gain (max) (V/V) 0.2 Small-signal bandwidth (typ) (Hz) 1500000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Gain error (±) (max) (%) 0.024
Number of channels 1 Vs (min) (V) 1.8 Vs (max) (V) 5.5 CMRR (min) (dB) 86 Common-mode input low (min) (V) -12.5 Common-mode input high (max) (V) 17.5 Input offset (±) (max) (V) 0.0005 Iq (typ) (mA) 1.1 Slew rate (typ) (V/µs) 15 Voltage gain (min) (V/V) 0.2 Voltage gain (max) (V/V) 0.2 Small-signal bandwidth (typ) (Hz) 1500000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125 Gain error (±) (max) (%) 0.024
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Gain of 0.2 to Interface ±10-V Signals to Single-Supply ADCs
  • Gain Accuracy: ±0.024% (max)
  • Wide Bandwidth: 1.5 MHz
  • High Slew Rate: 15 V/µs
  • Low Offset Voltage: ±100 µV
  • Low Offset Drift: ±1.5 µV/°C
  • Single-Supply Operation Down to 1.8 V
  • APPLICATIONS
    • Industrial Process Controls
    • Instrumentation
    • Differential to Single-Ended Conversion
    • Audio Line Receivers
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–55°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability

(1) Additional temperature ranges are available - contact factory
All other trademarks are the property of their respective owners.
  • Gain of 0.2 to Interface ±10-V Signals to Single-Supply ADCs
  • Gain Accuracy: ±0.024% (max)
  • Wide Bandwidth: 1.5 MHz
  • High Slew Rate: 15 V/µs
  • Low Offset Voltage: ±100 µV
  • Low Offset Drift: ±1.5 µV/°C
  • Single-Supply Operation Down to 1.8 V
  • APPLICATIONS
    • Industrial Process Controls
    • Instrumentation
    • Differential to Single-Ended Conversion
    • Audio Line Receivers
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–55°C/125°C) Temperature Range(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability

(1) Additional temperature ranges are available - contact factory
All other trademarks are the property of their respective owners.

The INA159 is a high slew rate, G = 1/5 difference amplifier consisting of a precision op amp with a precision resistor network. The gain of 1/5 makes the INA159 useful to couple ±10-V signals to single-supply analog-to-digital converters (ADCs), particularly those operating on a single +5-V supply. The on-chip resistors are laser-trimmed for accurate gain and high common-mode rejection. Excellent temperature coefficient of resistance (TCR) tracking of the resistors maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends beyond the positive and negative supply rails. It operates on a total of 1.8-V to 5.5-V single or split supplies. The INA159 reference input uses two resistors for easy mid-supply or reference biasing.

The difference amplifier is the foundation of many commonly-used circuits. The INA159 provides this circuit function without using an expensive external precision resistor network. The INA159 is available in an MSOP-8 surface-mount package and is specified for operation over the extended industrial temperature range, –55°C to 125°C.

The INA159 is a high slew rate, G = 1/5 difference amplifier consisting of a precision op amp with a precision resistor network. The gain of 1/5 makes the INA159 useful to couple ±10-V signals to single-supply analog-to-digital converters (ADCs), particularly those operating on a single +5-V supply. The on-chip resistors are laser-trimmed for accurate gain and high common-mode rejection. Excellent temperature coefficient of resistance (TCR) tracking of the resistors maintains gain accuracy and common-mode rejection over temperature. The input common-mode voltage range extends beyond the positive and negative supply rails. It operates on a total of 1.8-V to 5.5-V single or split supplies. The INA159 reference input uses two resistors for easy mid-supply or reference biasing.

The difference amplifier is the foundation of many commonly-used circuits. The INA159 provides this circuit function without using an expensive external precision resistor network. The INA159 is available in an MSOP-8 surface-mount package and is specified for operation over the extended industrial temperature range, –55°C to 125°C.
filter 查找其他 差分放大器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 5
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 Precision, Gain of 0.2 Level Translation Difference Amplifier 数据表 2008年 11月 20日
* VID INA159-EP VID V6209613 2016年 6月 21日
* 辐射与可靠性报告 INA159AMDGKTEP Reliability Report (Rev. A) 2012年 4月 5日
电子书 The Signal e-book: 有关运算放大器设计主题的博客文章汇编 英语版 2018年 1月 31日
应用手册 所选封装材料的热学和电学性质 2008年 10月 16日

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

DIP-ADAPTER-EVM — DIP 适配器评估模块

借助 DIP-Adapter-EVM 加快运算放大器的原型设计和测试，该 EVM 有助于快速轻松地连接小型表面贴装 IC 并且价格低廉。您可以使用随附的 Samtec 端子板连接任何受支持的运算放大器，或者将这些端子板直接连接至现有电路。

DIP-Adapter-EVM 套件支持六种常用的业界通用封装，包括：

  • D 和 U (SOIC-8)
  • PW (TSSOP-8)
  • DGK（MSOP-8、VSSOP-8）
  • DBV（SOT23-6、SOT23-5 和 SOT23-3）
  • DCK（SC70-6 和 SC70-5）
  • DRL (SOT563-6)
用户指南: PDF
TI.com 上无现货
仿真模型

INA159 and INA159-EP PSpice Model (Rev. B)

SBOC074B.ZIP (27 KB) - PSpice Model
下载
计算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)

支持的产品和硬件

支持的产品和硬件
启动 下载
模拟工具

PSPICE-FOR-TI — PSpice® for TI 设计和仿真工具

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。 

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
模拟工具

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能，允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装，如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能，但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表，请参阅：SpiceRack - 完整列表 

需要 HSpice (...)

用户指南: PDF
英语版 (Rev.A): PDF
View Options
封装 引脚 CAD 符号、封装和 3D 模型
VSSOP (DGK) 8 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频