无线微控制器
超低功耗传感器控制器
低功耗
无线协议支持
高性能无线电
法规遵从性
MCU 外设
信息安全机制
开发工具和软件
工作温度范围
封装
SimpleLink™CC2674P10 器件是一款多协议、多频带 2.4GHz 无线微控制器 (MCU)，支持 Thread、Zigbee、低功耗 Bluetooth 5.3、IEEE 802.15.4、支持 IPv6 的智能对象 (6LoWPAN)、专有系统（包括 2.4GHz 的 TI 15.4-Stack）和通过动态多协议管理器 (DMM) 驱动程序实现的并发多协议。该器件经过优化，可在楼宇安防系统、HVAC、医疗、有线网络、便携式电子产品、家庭影院和娱乐市场中实现低功耗无线通信和高级检测。该器件的突出特性包括：
CC2674P10 器件是 SimpleLink™ MCU 平台的一部分，该平台包括 Wi-Fi、低功耗蓝牙、Thread、Zigbee、低于 1GHz MCU 和主机 MCU，它们共用一个通用、易于使用的开发环境，其中包含单核软件开发套件 (SDK) 和丰富的工具集。借助一次性集成的 SimpleLink™ 平台，用户可以将产品组合中器件的任何组合添加至自有设计中，从而在设计要求变更时实现代码的完全重复使用。更多详细信息，请参阅 SimpleLink MCU 平台。
除了软件兼容之外，在多频段无线 MCU 中，7mm × 7mm QFN 封装的 352kB 闪存到最高 1MB 闪存都是引脚对引脚兼容的，以更大限度提高设计的可扩展性。更多有关 TI 的 2.4GHz 器件的信息，请参阅 www.ti.com/bluetooth。
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | CC2674P10 具有集成功率放大器的 SimpleLink™ 高性能多协议 2.4GHz 无线 MCU 数据表 (Rev. B) | PDF | HTML | 英语版 (Rev.B) | PDF | HTML | 2025年 3月 17日 |
| * | 勘误表 | CC2674P10 SimpleLink™ Wireless MCU Device Revision B (Rev. C) | PDF | HTML | 2025年 2月 14日 | ||
| * | 用户指南 | CC13x4, CC26x4 SimpleLink™ Wireless MCU Technical Reference Manual | PDF | HTML | 2023年 3月 23日 | ||
| 应用手册 | 如何认证您的蓝牙产品 (Rev. N) | PDF | HTML | 英语版 (Rev.N) | PDF | HTML | 2025年 11月 26日 | |
| 应用手册 | CC13xx/CC26xx 硬件配置和 PCB 设计注意事项 (Rev. H) | PDF | HTML | 英语版 (Rev.H) | PDF | HTML | 2024年 6月 3日 | |
| 证书 | LP-EM-CC1354P10-6 EU Declaration of Conformity (DoC) | 2024年 4月 23日 | ||||
| 应用手册 | 向 CC2674R10 和 CC2674P10 的硬件迁移 | PDF | HTML | 英语版 | PDF | HTML | 2023年 7月 14日 | |
| 应用简报 | 旨在满足复杂物联网要求的无线 MCU | PDF | HTML | 英语版 | PDF | HTML | 2023年 7月 13日 | |
| 应用手册 | 配置直接测试模式的低功耗蓝牙器件 | PDF | HTML | 英语版 | PDF | HTML | 2022年 6月 3日 | |
| 应用手册 | TI-15.4 Stack Frequency Hopping Mode FCC Compliance (Rev. A) | 2017年 2月 28日 |
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
μISP 既可以连接到主机 PC（内置 RS-232、USB 和 LAN 连接），也可以在独立模式下运行。
只需按下 START 按钮或通过某些 TTL 控制线，即可在独立模式下执行编程周期。
其紧凑的尺寸和多功能性便于集成到生产环境、手动和自动流程中。
Lauterbach TRACE32® 工具是一套先进的硬件和软件组件，开发人员可通过它分析、优化和认证 TI 的许多无线连接芯片。这套全球知名的嵌入式系统调试解决方案是所有开发阶段（从器件前开发一直到产品认证和现场故障排除）的理想解决方案： 完整的片上断点支持；运行时存储器访问；闪存编程和基准测试计数器。所有功能均可脚本化，使开发人员能够反复执行相同的测试序列。Lauterbach 工具直观的模块化设计可为工程师提供当今最高的可用性能，并提供可随需求变化而调整和扩展的系统。经认证的工具资质认证支持套件 (TQSK) 提供了一种便捷而全面的方法来鉴定 TRACE32® (...)
此 LaunchPad™ 开发套件可加速开发具有集成功率放大器和多频带无线电支持（支持 Sub-1GHz 和 2.4GHz 同时运行）的器件。支持的协议包括低功耗 Bluetooth®、Wi-SUN®、Thread、Zigbee®、TI 15.4 stack 以及与 SimpleLink™ 低功耗软件开发套件兼容的 2.4GHz 和 Sub-1GHz 专有射频协议。提供的版本具有不同的射频匹配网络和功率级别。这是一个分离式 LaunchPad™ 开发套件，意味着不包含 XDS 调试器。推荐使用 LP-XDS110 或 LP-XDS110ET 调试器。
WriteNow! 系列系统内编程器是编程行业的突破性产品。该系列编程器支持来自不同制造商的众多器件（微控制器、存储器、CPLD 和其他可编程器件），并具有紧凑的尺寸，方便与 ATE/固定装置集成。它们可独立运行，也可连接到主机 PC（内置 RS-232、LAN 和 USB 连接），并附带易于使用的软件实用程序。
The SimpleLink™ Low Power SDKs support the CC13xx, CC23xx and CC26xx family of products. Together, these SDKs provide comprehensive software packages for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Mesh, Zigbee®, Matter, Thread, 802.15.4-based, (...)
The SimpleLink™ Low Power SDKs support the CC13xx, CC23xx and CC26xx family of products. Together, these SDKs provide comprehensive software packages for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Mesh, Zigbee®, Matter, Thread, 802.15.4-based, (...)
The SimpleLink™ Low Power SDKs support the CC13xx, CC23xx and CC26xx family of products. Together, these SDKs provide comprehensive software packages for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Mesh, Zigbee®, Matter, Thread, 802.15.4-based, (...)
The TI-15.4-Stack-Gateway-Linux Software Development Kit (SDK) provides a Linux software middleware for the TI 15.4-Stack companion solution. It includes a full Linux user-space software that runs on top of the TI Processor SDK for AM335x platform, which interfaces with the co-processor embedded (...)
当前工具 (ARM-CGT-CLANG) 从开源 Clang 编译器及其支持的 LLVM 基础架构衍生而来。旧版专有 (ARM-CGT) 工具处于维护状态，将根据需要收到错误修复。请参阅所使用的软件开发套件 (SDK) 的文档，以确认支持哪些编译器。通常，基于 Clang 的编译器用于新产品。
Code Composer Studio™ 是适用于 TI 嵌入式器件的集成开发环境 (IDE)。开始开发时，建议先下载 Code (...)
Code Composer Studio is an integrated development environment (IDE) for TI's microcontrollers and processors. It is comprised of a rich suite of tools used to build, debug, analyze and optimize embedded applications. Code Composer Studio is available across Windows®, Linux® and macOS® platforms.
(...)
SysConfig is a configuration tool designed to simplify hardware and software configuration challenges to accelerate software development.
SysConfig is available as part of the Code Composer Studio™ integrated development environment as well as a standalone application. Additionally SysConfig (...)
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
The SimpleLink hardware design review process provides a way to get in touch, one-on-one, with a subject matter expert that can help review your design and provide valuable feedback. A simple three-step process for requesting a review as well as links to relevant technical documentation and (...)
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| VQFN (RGZ) | 48 | Ultra Librarian |
| VQFN (RSK) | 64 | Ultra Librarian |
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。
SmartRF Studio 7 in Cloud TI Resource Explorer
Compressed source file archive
SmartRF™ Studio is a Windows application that can be used to evaluate and configure Low Power RF devices from Texas Instruments. The application helps designers of RF systems to easily evaluate the radio at an early stage in the design process. It is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the RF system. SmartRF Studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the RF device.
Release Information
The SimpleLink™ Matter links to the Texas Instruments GitHub repository that contains all the software development tools that enable engineers to develop Matter Accessory Device and is the starting point for Matter development on all SimpleLink CC13xx and CC26xx family of wireless microcontrollers (MCUs). It contains essential software components, such as a Bluetooth® Low Energy (BLE) protocol stack supporting Bluetooth, Thread networking stack based on OpenThread and Matter application layer stack based on open source Matter stack. In addition, the Dynamic Multi-Protocol Manager (DMM) software component enables multiprotocol development on a single SimpleLink wireless MCU.
The SimpleLink MCU portfolio offers a single development environment that delivers flexible hardware, software, and tool options for customers developing wired and wireless applications. With 100 percent code reuse across host MCUs, Wi-Fi™, Bluetooth Low Energy, 2.4GHz, Sub-1GHz devices and more, choose the MCU or connectivity standard that fits your design. A one-time investment with the SimpleLink software development kit allows you to reuse often, opening the door to create unlimited applications. For more information, visit www.ti.com/simplelink.
This Texas Instruments OpenThread GitHub repository (ot-ti) contains the software development components and tools that enable engineers to develop Thread based products. This repository is the starting point for Thread development on the supported SimpleLink CC13xx and CC26xx family of wireless microcontrollers (MCUs) for all Thread roles.
The SimpleLink MCU portfolio offers a single development environment that delivers flexible hardware, software, and tool options for customers developing wired and wireless applications. With 100 percent code reuse across host MCUs, Wi-Fi™, Bluetooth Low Energy, 2.4GHz, Sub-1GHz devices and more, choose the MCU or connectivity standard that fits your design. A one-time investment with the SimpleLink software development kit allows you to reuse often, opening the door to create unlimited applications. For more information, visit www.ti.com/simplelink.
None
Initial release of the SimpleLink CC13xx CC26xx Academy
TI 15.4-Stack is an IEEE 802.15.4-based software stack part of the SimpleLink Low Power F2 SDK that supports a Star network topology for wireless applications. TI 15.4-Stack provides a complete end-to-end wireless application development solution to reduce time and cost of getting your product to market.
Hardware Design Review Request Form for SimpleLink 2.4GHz Devices
The SimpleLink™ Low Power F2 Software Development Kit (SDK), formerly known as the CC13xx and CC26xx SDK, delivers components that enable engineers to develop applications on the Texas Instruments SimpleLink CC13xx and CC26xx family of wireless microcontrollers (MCUs). This software toolkit provides a cohesive and consistent software experience for all SimpleLink CC13xx and CC26xx wireless MCU users by packaging essential software components, such as a Bluetooth® Low Energy (LE) protocol stack supporting Bluetooth 5.2, Zigbee 3.0 compliant protocol suite, RF-Proprietary examples, TI 15.4 Stack, TI Wi-SUN FAN Stack, Amazon Sidewalk examples, as well as the TI-RTOS7 and FreeRTOS kernels and TI Drivers in one easy-to-use software package along with example applications and documentation. In addition, the Dynamic Multi-Protocol Manager (DMM) software component enables multiprotocol development on a single SimpleLink wireless MCU.
The SimpleLink MCU portfolio offers a single development environment that delivers flexible hardware, software, and tool options for customers developing wired and wireless applications. With 100 percent code reuse across host MCUs, Wi-Fi™, Bluetooth Low Energy, Sub-1GHz devices and more, choose the MCU or connectivity standard that fits your design. A one-time investment with the SimpleLink software development kit allows you to reuse often, opening the door to create unlimited applications. For more information, visit www.ti.com/simplelink.
This is version 8.32.00.07 of the SimpleLink Low Power F2 SDK. This SDK is also available on GitHub at https://github.com/TexasInstruments/simplelink-lowpower-f2-sdk .
The SysConfig tool is used configure TI software and hardware. For software configuration, SysConfig is used in conjunction with a TI SDK. For PinMux configuration, the tool may be used standalone.
查看产品详情页，验证是否能提供支持。
The Code Composer Studio™ IDE is a complete integrated suite that enables developers to create and debug applications of all Texas Instruments Embedded Processors (Sitara, DSP, Automotive, Keystone), Microcontrollers (SimpleLink™, C2000 Digital Control, MSP430, TM4C, Hercules), as well as Digital Power (UCD) and Programmable Gain Amplifier (PGA) devices.
CCS v20 is TI’s next generation Integrated Development Environment (IDE) based on Theia IDE framework. CCS v20.4.1 uses a modified version of the Theia-IDE framework and offers a user experience similar to Visual Studio Code™.