- 
ADCs: One-per-Cell Voltage, PowerLAN, PowerPump, bqWizard are trademarks of Texas Instruments.
All other trademarks are the property of their respective owners.
The bq78PL116 master gateway battery controller is part of a complete Li-Ion control, monitoring, and safety solution designed for large series cell strings.
The bq78PL116 along with bq76PL102 PowerLAN™ dual-cell monitors provide complete battery-system control, communications, and safety functions for a structure of three up to 16 series cells. This PowerLAN system provides simultaneous, synchronized voltage and current measurements using one A/D per-cell technology. This eliminates system-induced noise from measurements and allows the precise, continuous, real-time calculation of cell impedance under all operating conditions, even during widely fluctuating load conditions.
PowerPump technology transfers charge between cells to balance their voltage and capacity. Balancing is possible during all battery modes: charge, discharge, and rest. Highly efficient charge-transfer circuitry nearly eliminates energy loss while providing true real-time balance between cells, resulting in longer run-time and improved cycle life.
Temperature is sensed by up to 4 external sensors and one on-chip sensor. This permits accurate temperature monitoring of each cell individually. Firmware is then able to compensate for the temperature-induced effects on capacity, impedance, and OCV on a cell-by-cell basis, resulting in superior charge/ discharge and balancing control.
External MOSFET control inputs provide user- definable direct hardware control over MOSFET states. Smart control prevents excessive current through MOSFET body diodes. Auxiliary inputs can be used for enhanced safety and control in large multicell arrays.
The bq78PL116 is completely user-configurable, with parametric tables in flash memory to suit a variety of cell chemistries, operating conditions, safety controls, and data reporting needs. It is easily configured using the supplied bqWizard graphical user interface (GUI). The device is fully programmed and requires no algorithm or firmware development.
The bq78PL116 pin functions of LED1/SEG1–LED5/SEG5, PSH/BP/TP, and FIELD support LED, LCD, and electronic paper displays (EPDs). The user can configure the bq78PL116 for the desired display type.
| 类型 | 标题 | 下载最新的英语版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 数据表 | 具有 PowerPump 电池平衡技术的 PowerLAN 主网关控制器 数据表 (Rev. B) | 2011年 1月 5日 | |||
| 应用手册 | Wide-Vin Battery-Charger Using SMBus MSP430 MCUs and bq Fuel Gauges (Rev. B) | PDF | HTML | 2019年 7月 12日 | |||
| 应用手册 | PowerPump(TM) Balancing (Rev. B) | 2011年 10月 26日 | ||||
| 应用手册 | SBData Commands For PowerLAN(TM) Master Gateway Controller | 2011年 4月 14日 | ||||
| 应用手册 | What is a .tmap File? (Rev. A) | 2011年 3月 10日 | ||||
| 用户指南 | bq78PL116 Technical Reference Manual | 2011年 2月 21日 | ||||
| 用户指南 | bqWizard™ Application Software (Rev. C) | 2011年 1月 25日 | ||||
| 用户指南 | bq78PL116EVM Evaluation Module | 2011年 1月 19日 | ||||
| 应用手册 | Chemistry Selection for the bq78PL114 (Rev. B) | 2010年 2月 12日 |
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
This Application Programming Interface (API) is designed to support the production flow ofa PowerLAN Master Gateway controller based hardware. The methods provide a rich interfacefor calibrating, configuring, and updating firmware. This API is built on the .NET framework andcontains a COM visible (...)
The bqWizard™ application software allows the user to evaluate the condition, or state, of the battery Pack and Cells in the system. This software gives detailed insight into the workings of evaluation modules and user custom battery packs. The software is used to configure and setup (...)
| 封装 | 引脚 | 下载 |
|---|---|---|
| VQFN (RGZ) | 48 | 查看选项 |
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。