TIDT349 January   2024

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Required Equipment
    3. 1.3 Considerations
    4. 1.4 Dimensions
    5. 1.5 Test Setup
  6. 2Testing and Results
    1. 2.1 Efficiency Graphs
    2. 2.2 Efficiency Data
    3. 2.3 Thermal Images
  7. 3Waveforms
    1. 3.1 Charge Mode Start-Up Waveform
    2. 3.2 OTG Mode Start-Up Waveform
    3. 3.3 Voltage Transition at OTG Mode
    4. 3.4 Ripple and Noise at OTG Mode
    5. 3.5 Load Transients at OTG Mode
    6. 3.6 Switching Waveform
    7. 3.7 Overcurrent Protection at OTG Mode
    8. 3.8 Short-Circuit Protection at OTG Mode
    9. 3.9 Short-Circuit Protection at Charge Mode

1.3 Considerations

The reference design shows an example of how to implement a USB Type-C PD alongside a switching battery charger that is capable of handling high power and high current. This design can be used in power tool chargers, vacuum robot chargers, and portable power stations as well as various other personal electronic systems. This design assists with different functions, from the ability to charge a battery as well as providing power to the system or switching to OTG mode to source power to the connected device all through the USB Type-C connector.