SNAU257 October   2020

 

  1.   Trademarks
  2. 1Overview
    1. 1.1 Kit Contents
    2. 1.2 Related Documentation from Texas Instruments
  3. 2System Setup
    1. 2.1 Software Setup
      1. 2.1.1 Operating Systems
      2. 2.1.2 Software Installation
      3. 2.1.3 Analog EVM Controller Firmware Upgrade
    2. 2.2 Hardware Setup
      1. 2.2.1 Power Configurations and Jumper Settings
      2. 2.2.2 Connecting the Hardware
      3. 2.2.3 Electrostatic Discharge Warning
  4. 3Detailed Description
    1. 3.1 Hardware Description
      1. 3.1.1 Theory of Operation for the BOOSTXL-DAC-PORT
      2. 3.1.2 Signal Definition of the BOOSTXL-DAC-PORT
      3. 3.1.3 Theory of Operation for the TPL1401EVM Hardware
      4. 3.1.4 Signal Definition of the TPL1401EVM
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 Home Page
        2. 3.2.2.2 Setup Page
        3. 3.2.2.3 DIGIPOT Quick-Start Page
          1. 3.2.2.3.1 Basic DPOT Configuration Tab
        4. 3.2.2.4 Register Map Page
        5. 3.2.2.5 Collateral Page
  5. 4Schematic, PCB Layout, and Bill of Materials
    1. 4.1 BOOSTXL-DAC-PORT Schematic
    2. 4.2 TPL1401EVM Schematic
    3. 4.3 PCB Components Layout
    4. 4.4 BOOSTXL-DAC-PORT Bill of Materials
    5. 4.5 TPL1401EVM Bill of Materials

4.3 PCB Components Layout

Figure 4-4 through Figure 4-8 show the layout of the components for the TPL1401EVM board.

GUID-D9F70EE8-9431-4A53-9CA2-6083DB1B3381-low.pngFigure 4-4 BOOSTXL-DAC-PORT PCB Components Layout
GUID-53F215BE-2EE9-4347-86B6-0673DB29072A-low.gifFigure 4-5 BOOSTXL-DAC-PORT Top Layer
GUID-586A33A8-BB72-42E9-9FA7-99B0E3EB5A0A-low.pngFigure 4-6 BOOSTXL-DAC-PORT Bottom Layer
GUID-20200924-CA0I-4TPL-HPCG-MN9LDWHRCZNC-low.png Figure 4-7 TPL1401EVM PCB Components Layout
GUID-20200924-CA0I-JNWL-TB2T-VZBBBBGG4XV2-low.png Figure 4-8 TPL1401EVM Layers