SLVUD63 December   2025

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Connector, Test Point, and Jumper Descriptions
      1. 2.1.1 Connector and Test Point Descriptions
      2. 2.1.2 Jumper Configuration
        1. 2.1.2.1 JP1 (ENABLE)
        2. 2.1.2.2 JP5 (SYNC)
        3. 2.1.2.3 JP4 (Internal or External VCC Selection)
    2. 2.2 Test Procedure
  9. 3Hardware Design Files
    1. 3.1 Schematic
    2. 3.2 PCB Layouts
    3. 3.3 Bill of Materials
  10. 4Additional Information
    1.     Trademarks

Get Started

  1. Order the EVM at ti.com.
  2. Read the user's guide carefully.
  3. Prepare the bench setup per instructions. Take precautions to prevent damage by ESD when handling the EVM.
  4. Power up the EVM by following the recommended steps.
  5. Run tests and measurements. Take cautions of high voltage and hot temperature produced by the EVM during test.