SLUUBW2 November   2020 TPS92633-Q1

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Features
    2. 1.2 Typical Application
  3. 2TPS92633Q1EVM Description
    1. 2.1 TPS92633Q1EVM Board
    2. 2.2 Connector Map
    3. 2.3 Jumper Map
  4. 3Test Setup
  5. 4Schematic, Bill of Materials and Layout
    1. 4.1 Schematic
    2. 4.2 Bill of Materials (BOM)
    3. 4.3 Layout
  6.   Revision History

4.1 Schematic

Figure 4-1 shows the TPS92633Q1EVM schematic. To simulate off-board LED driving condition, EVM uses individul ground for Light Control Module (LCM) board and LED board and uses J11 to connect them together. Designers can use Dupont Line to take the place of shunt for real off-board test.

GUID-20201026-CA0I-JNPB-XRBW-6C1NJSCCPF0Q-low.gif Figure 4-1 Schematic