Register Settings

Register Address	Register Name	Setting	Description
0xD1	GENERAL_CONFIG	0x0000	[15:14] 0b00: Selects the type of waveform to be generated by the continuous waveform generator (CWG)
			[13] 0b0: Write 0b1 to lock device. Unlock by writing 0b0101 to DEVICE_UNLOCK_CODE field in the PROTECT register
			[12] 0b0: Write 0b1 to enable PMBus mode
			[11:9] 0b000: Selects the code step used for programmable slew rate control
			[8:5] 0b1111: Selects the code step used for programmable slew rate control
			[4:3] 0b00: Powers up the device output
			[2] 0b0: Disables the internal reference
			[1:0] 0b00: Selects the gain to be applied to the internal reference
0xD2	CONFIG2	0x1000	[15:14] 0b00: Configures the device I2C address
			[13:11] 0b010: Configures the GPI pin as Margin-High, Low trigger
			[10] 0b0: Write 0b1 to generate a high priority medical alarm
			[9] 0b0: Write 0b1 to generate a medium priority medical alarm
			[8] 0b0: Write 0b1 to generate a medium priority medical alarm
			[7:6] 0b00: Always write 0b00
			[5:4] 0b00: Selects the interburst time for medical alarms
			[3:2] 0b00: Selects the pulse off time for medical alarms
			[1:0] 0b00: Selects the pulse on time for medical alarms
0xD3	TRIGGER	0x0410	[15:12] 0b0000: Write 0b0101 to unlock the device
			[11] 0b0: Don't care
			[10] 0b1: Write 0b1 to enable the GPI pin
			[9] 0b0: Write 0b1 to load all registers with factory reset values
			[8] 0b0: Write 0b1 to enable continuous waveform generation mode
			[7] 0b0: Write 1 to initiate PMBus MARGIN_HIGH command
			[6] 0b0: Write 1 to initiate PMBus MARGIN_LOW command
			[5] 0b0: Write 0b1 to reload applicable registers with existing NVM settings
			[4] 0b1: Write 0b1 to store applicable register settings to the NVM
			[3:0] 0b0000: Write 0b1010 to reset registers with existing NVM settings or default settings
0x25	DAC_MARGIN_HIGH	0x0998	[15:12] 0b0000: Don't care
			[11:2] 0x266: 10-bit data updates the MARGIN_HIGH code
			[1:0] 0b00: Don't care
0x26	DAC_MARGIN_LOW	0x0334	[15:12] 0b0000: Don't care
			[11:2] 0xCD: 10-bit data updates the MARGIN_LOW code
			[1:0] 0b00: Don't care

Register Address	Register Name	Setting	Description
0xD1	GENERAL_CONFIG	0x0000	[15:14] 0b00: Selects the type of waveform to be generated by the continuous waveform generator (CWG)
			[13] 0b0: Write 0b1 to lock device. Unlock by writing 0b0101 to DEVICE_UNLOCK_CODE field in the PROTECT register
			[12] 0b0: Write 0b1 to enable PMBus mode
			[11:9] 0b000: Selects the code step used for programmable slew rate control
			[8:5] 0b0000: Selects the slew rate used for programmable slew rate control
			[4:3] 0b00: Powers up the device output
			[2] 0b0: Disables the internal reference
			[1:0] 0b00: Selects the gain to be applied to the internal reference
0xD2	CONFIG2	0x0800	[15:14] 0b00: Configures the device I2C address
			[13:11] 0b001: Configures the GPI pin as Power-Up, Down trigger
			[10] 0b0: Write 0b1 to generate a high priority medical alarm
			[9] 0b0: Write 0b1 to generate a medium priority medical alarm
			[8] 0b0: Write 0b1 to generate a medium priority medical alarm
			[7:6] 0b00: Always write 0b00
			[5:4] 0b00: Selects the interburst time for medical alarms
			[3:2] 0b00: Selects the pulse off time for medical alarms
			[1:0] 0b00: Selects the pulse on time for medical alarms
0xD3	TRIGGER	0x0410	[15:12] 0b0000: Write 0b0101 to unlock the device
			[11] 0b0: Don't care
			[10] 0b1: Write 0b1 to enable the GPI pin
			[9] 0b0: Write 0b1 to load all registers with factory reset values
			[8] 0b0: Write 0b1 to start continuous waveform generation output
			[7] 0b0: Write 1 to initiate PMBus MARGIN_HIGH command
			[6] 0b0: Write 1 to initiate PMBus MARGIN_LOW command
			[5] 0b0: Write 0b1 to reload applicable registers with existing NVM settings
			[4] 0b1: Write 0b1 to store applicable register settings to the NVM
			[3:0] 0b0000: Write 0b1010 to reset registers with existing NVM settings or default settings
0x25	DAC_DATA	0x0998	[15:12] 0b0000: Don't care
			[11:2] 0x266: 10-bit data updates the DAC_DATA code
			[1:0] 0b00: Don't care