ZHCSPX9D September 2005 – November 2023 XTR117
PRODUCTION DATA
请参考 PDF 数据表获取器件具体的封装图。
参数 | 测试条件 | 最小值 | 典型值 | 最大值 | 单位 | |
---|---|---|---|---|---|---|
输出 | ||||||
IO | 输出电流公式 | IO = IIN × 100 | ||||
输出电流,线性范围 | 0.20 | 25 | mA | |||
ILIM | 过量程限制 | 32 | mA | |||
IMIN | 欠量程限制 | IREG = 0 | 0.13 | 0.20 | mA | |
跨度 | ||||||
S | 跨度(电流增益) | 100 | A/A | |||
误差(1) | IO = 200µA 至 25mA | ±0.05 | ±0.4 | % | ||
IO = 200µA 至 25mA, TA = –40°C 至 +125°C |
±3 | ±20 | ppm/°C | |||
非线性度 | IO = 200µA 至 25mA | ±0.003 | ±0.02 | % | ||
输入 | ||||||
VOS | 失调电压(运算放大器) | IIN = 40µA | ±100 | ±500 | µV | |
IIN = 40µA, TA = –40°C 至 +125°C |
±0.7 | ±6 | µV/°C | |||
IIN = 40µA, V+ = 7.5V 至 36V |
0.1 | 2 | µV/V | |||
IB | 偏置电流 | -35 | nA | |||
TA = -40°C 至 +125°C | 300 | pA/°C | ||||
θn | 噪声 | 0.1Hz 至 10Hz | 0.6 | µVpp | ||
动态响应 | ||||||
小信号带宽 | CLOOP = 0,RL = 0 | 380 | kHz | |||
压摆率 | 3.2 | mA/µs | ||||
VREG(2) | ||||||
电压 | 5 | V | ||||
电压精度 | IREG = 0mA | ±0.05 |
±0.1 |
V | ||
IREG = 0mA, TA = –40°C 至 +125°C |
±0.1 | mV/°C | ||||
IREG = 0mA, V+ = 7.5V 至 36V |
1 | mV/V | ||||
电压精度与 VREG 电流间的关系 | 请参阅图 5-4 | |||||
短路电流 | 12 | mA | ||||
电源 | ||||||
IQ | 静态电流 | 130 | 200 | µA | ||
TA = -40°C 至 +125°C | 250 |