ZHCSHW9B March   2018  – October 2023 TUSB1002A

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Revision History
  6. 5 Pin Configuration and Functions
  7. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Timing Requirements
    7. 6.7 Switching Characteristics
    8. 6.8 Typical Characteristics
  8. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 4-Level Control Inputs
      2. 7.3.2 Linear Equalization
      3. 7.3.3 Adjustable VOD Linear Range and DC Gain
      4. 7.3.4 USB3.2 Dual Channel Operation (MODE = “F”)
      5. 7.3.5 USB3.2 Single Channel Operation (MODE = “1”)
      6. 7.3.6 PCIe/SATA/SATA Express Redriver Operation (MODE = “R”; CFG1 = "0"; CFG2 = "0" )
      7. 7.3.7 Basic Redriver Operation (MODE = “0”)
    4. 7.4 Device Functional Modes
      1. 7.4.1 Shutdown Mode
      2. 7.4.2 Disconnect Mode
    5. 7.5 U0 Mode
    6. 7.6 U1 Mode
    7. 7.7 U2/U3 Mode
  9. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical USB3.2 Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 ESD Protection
      4. 8.2.4 Application Curves
    3. 8.3 Typical SATA, PCIe and SATA Express Application
      1. 8.3.1 Design Requirements
      2. 8.3.2 Detailed Design Procedure
      3. 8.3.3 Application Curves
    4. 8.4 Power Supply Recommendations
    5. 8.5 Layout
      1. 8.5.1 Layout Guidelines
      2. 8.5.2 Layout Example
  10. 9 Device and Documentation Support
    1. 9.1 接收文档更新通知
    2. 9.2 支持资源
    3. 9.3 Trademarks
    4. 9.4 静电放电警告
    5. 9.5 术语表
  11. 10Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • RGE|24
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.2.3 ESD Protection

It may be necessary to incorporate an ESD component to protect the TUSB1002A from electrostatic discharge (ESD). It is recommended that the ESD protection component has working peak voltage of ≥ 2.5 V, a breakdown voltage of ≥ 3.5 V, and a clamp voltage of ≤ 4.3 V. A clamp voltage greater than 4.3 V may require a RESD on each differential pin. The ESD component should be placed near the USB connector.

Table 8-2 Recommended ESD Protection Component
Manufacturer Part Number Required RESD to pass IEC 61000-4-2 Contact ±8-kV
Nexperia PUSB3FR4 None
Nexperia PESD2V8Y1BSF None
Texas Instruments TPD1E04U04DPLR 2-Ω
Texas Instruments TPD4E02B04DQAR 2-Ω