ZHCSIN0E August   2018  – April 2020 TPS62810-Q1 , TPS62811-Q1 , TPS62812-Q1 , TPS62813-Q1

PRODUCTION DATA.  

  1. 特性
  2. 应用
  3. 说明
    1.     Device Images
      1.      简化原理图
      2.      效率与输出电流间的关系;VOUT = 3.3V;PWM/PFM;fS = 2.25MHz
  4. 修订历史记录
  5. Device Comparison Table
  6. Pin Configuration and Functions
    1.     Pin Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. Parameter Measurement Information
    1. 8.1 Schematic
  9. Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Precise Enable
      2. 9.3.2 COMP/FSET
      3. 9.3.3 MODE / SYNC
      4. 9.3.4 Spread Spectrum Clocking (SSC)
      5. 9.3.5 Undervoltage Lockout (UVLO)
      6. 9.3.6 Power Good Output (PG)
      7. 9.3.7 Thermal Shutdown
    4. 9.4 Device Functional Modes
      1. 9.4.1 Pulse Width Modulation (PWM) Operation
      2. 9.4.2 Power Save Mode Operation (PWM/PFM)
      3. 9.4.3 100% Duty-Cycle Operation
      4. 9.4.4 Current Limit and Short Circuit Protection
      5. 9.4.5 Foldback Current Limit and Short Circuit Protection
      6. 9.4.6 Output Discharge
      7. 9.4.7 Soft Start / Tracking (SS/TR)
  10. 10Application and Implementation
    1. 10.1 Application Information
      1. 10.1.1 Programming the Output Voltage
      2. 10.1.2 External Component Selection
        1. 10.1.2.1 Inductor Selection
      3. 10.1.3 Capacitor Selection
        1. 10.1.3.1 Input Capacitor
        2. 10.1.3.2 Output Capacitor
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
      3. 10.2.3 Application Curves
    3. 10.3 System Examples
      1. 10.3.1 Fixed Output Voltage Versions
      2. 10.3.2 Voltage Tracking
      3. 10.3.3 Synchronizing to an External Clock
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Example
  13. 13器件和文档支持
    1. 13.1 器件支持
      1. 13.1.1 第三方产品免责声明
    2. 13.2 文档支持
      1. 13.2.1 相关文档
    3. 13.3 相关链接
    4. 13.4 接收文档更新通知
    5. 13.5 支持资源
    6. 13.6 商标
    7. 13.7 静电放电警告
    8. 13.8 Glossary
  14. 14机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
  • RWY|9
散热焊盘机械数据 (封装 | 引脚)
订购信息

Inductor Selection

The TPS6281x-Q1 is designed for a nominal 0.47-µH inductor with a switching frequency of typically 2.25 MHz. Larger values can be used to achieve a lower inductor current ripple but they can have a negative impact on efficiency and transient response. Smaller values than 0.47 µH cause a larger inductor current ripple which causes larger negative inductor current in forced PWM mode at low or no output current. For a higher or lower nominal switching frequency, the inductance must be changed accordingly. See the Recommended Operating Conditions for details.

The inductor selection is affected by several effects like inductor ripple current, output ripple voltage, PWM-to-PFM transition point, and efficiency. In addition, the inductor selected has to be rated for appropriate saturation current and DC resistance (DCR). Equation 8 calculates the maximum inductor current.

Equation 8. TPS62810-Q1 TPS62811-Q1 TPS62812-Q1 TPS62813-Q1 SLVSAG7_eqilmax.gif
Equation 9. TPS62810-Q1 TPS62811-Q1 TPS62812-Q1 TPS62813-Q1 equation_Delta_ILmax.gif

where

  • IL(max) is the maximum inductor current
  • ΔIL(max) is the peak-to-peak inductor ripple current
  • Lmin is the minimum inductance at the operating point

Table 6. Typical Inductors

TYPE INDUCTANCE [µH] CURRENT [A](1) FOR DEVICE NOMINAL SWITCHING FREQUENCY DIMENSIONS [LxBxH] mm MANUFACTURER(2)
XFL4015-471ME 0.47 µH, ±20% 3.5 TPS62813-Q1 / 12-Q1 2.25 MHz 4 x 4 x 1.6 Coilcraft
XEL4020-561ME 0.56 µH, ±20% 9.9 TPS62810-Q1 / 13-Q1 / 12-Q1 2.25 MHz 4 x 4 x 2.1 Coilcraft
XEL4030-471ME 0.47 µH, ±20% 12.3 TPS62810-Q1 / 13-Q1 / 12-Q1 2.25 MHz 4 x 4 x 3.1 Coilcraft
XEL3515-561ME 0.56 µH, ±20% 4.5 TPS62813-Q1 / 12-Q1 2.25 MHz 3.5 x 3.2 x 1.5 Coilcraft
XFL3012-331MEB 0.33 µH, ±20% 2.6 TPS62811-Q1 / 12-Q1 ≥ 3.5 MHz 3 x 3 x 1.3 Coilcraft
XPL2010-681ML 0.68 µH, ±20% 1.5 TPS62811-Q1 2.25 MHz 2 x 1.9 x 1 Coilcraft
DFE252012PD-R47M 0.47 µH, ±20% see data sheet TPS62813-Q1 / 12-Q1 / 11-Q1 2.25 MHz 2.5 x 2 x 1.2 Murata
Lower of IRMS at 20°C rise or ISAT at 20% drop.

Calculating the maximum inductor current using the actual operating conditions gives the minimum saturation current of the inductor needed. A margin of about 20% is recommended to add. A larger inductor value is also useful to get lower ripple current, but increases the transient response time and size as well.