ZHCSLJ9E 数据表 | 德州仪器 TI.com.cn

ZHCSLJ9E October 1998 – July 2020 SN74LVCH32373A

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

NMJ|96

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.5 Electrical Characteristics

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER	TEST CONDITIONS		V_CC	MIN	TYP⁽¹⁾	MAX	UNIT
V_OH	I_OH = –100 μA		1.65 V to 3.6 V	V_CC – 0.2			V
	I_OH = –4 mA		1.65 V	1.2
	I_OH = –8 mA		2.3 V	1.7
	I_OH = –12 mA		2.7 V	2.2
	I_OH = –12 mA		3 V	2.4
	I_OH = –24 mA		3 V	2.2
V_OL	I_OL = 100 μA		1.65 V to 3.6 V			0.2	V
	I_OL = 4 mA		1.65 V			0.45
	I_OL = 8 mA		2.3 V			0.7
	I_OL = 12 mA		2.7 V			0.4
	I_OL = 24 mA		3 V			0.55
I_I	V_I = 0 to 5.5 V		3.6 V			±5	μA
I_I(hold)	V_I = 0.58 V		1.65 V	25			μA
	V_I = 1.07 V		1.65 V	–25
	V_I = 0.7 V		2.3 V	45
	V_I = 1.7 V		2.3 V	–45
	V_I = 0.8 V		3 V	75
	V_I = 2 V		3 V	–75
	V_I = 0 to 3.6 V⁽²⁾		3.6 V			±500
I_off	V_I or V_O = 5.5 V		0			±10	μA
I_OZ	V_O = 0 to 5.5 V		3.6 V			±10	μA
I_CC	V_I = V_CC or GND	I_O = 0	3.6 V			40	μA
I_CC	3.6 V ≤ V_I ≤ 5.5 V⁽³⁾	I_O = 0	3.6 V			40	μA
ΔI_CC	One input at V_CC – 0.6 V,	Other inputs at V_CC or GND	2.7 V to 3.6 V			500	μA
C_i	V_I = V_CC or GND		3.3 V		5		pF
C_o	V_O = V_CC or GND		3.3 V		6.5		pF

(1) All typical values are at V_CC = 3.3 V, T_A = 25°C.

(2) This is the bus-hold maximum dynamic current. It is the minimum overdrive current required to switch the input from one state to another.

(3) This applies in the disabled state only.