SCLS429K MAY   1999  – November 2016 SN74LV4052A

UNLESS OTHERWISE NOTED, this document contains PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1  Absolute Maximum Ratings
    2. 6.2  ESD Ratings
    3. 6.3  Recommended Operating Conditions
    4. 6.4  Thermal Information
    5. 6.5  Electrical Characteristics
    6. 6.6  Switching Characteristics: VCC = 2.5 V ± 0.2 V
    7. 6.7  Switching Characteristics: VCC = 3.3 V ± 0.3 V
    8. 6.8  Switching Characteristics: VCC = 5 V ± 0.5 V
    9. 6.9  Switching Characteristics: Analog
    10. 6.10 Operating Characteristics
    11. 6.11 Typical Characteristics
  7. 7 Parameter Measurement Information
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
    4. 8.4 Device Functional Modes
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 Community Resource
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • DB|16
  • PW|16
  • NS|16
  • RGY|16
  • N|16
  • D|16
  • DGV|16
散热焊盘机械数据 (封装 | 引脚)
订购信息

6 Specifications

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
Supply voltage, VCC –0.5 7 V
Input voltage, VI(2) –0.5 7 V
Switch I/O voltage, VIO(2)(3) –0.5 VCC + 0.5 V
Input clamp current, IIK VI < 0 –20 mA
I/O diode current, IIOK VIO < 0 and VIO > VCC 50 mA
Switch through current, IT VIO = 0 to VCC ±25 mA
Continuous current through VCC or GND ±50 mA
Junction temperature, TJ 150 °C
Storage temperature, Tstg –65 150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
(3) This value is limited to 5.5 V maximum.

6.2 ESD Ratings

VALUE UNIT
V(ESD) Electrostatic discharge Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) ±4000 V
Charged-device model (CDM), per JEDEC specification JESD22-C101(2) ±2000
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. Tested on D package

6.3 Recommended Operating Conditions

see(2)
MIN MAX UNIT
VCC Supply voltage 2(1) 5.5 V
VIH High-level input voltage (control inputs) VCC = 2 V 1.5 V
VCC = 2.3 V to 2.7 V VCC × 0.7
VCC = 3 V to 3.6 V VCC × 0.7
VCC = 4.5 V to 5.5 V VCC × 0.7
VIL Low-level input voltage (control inputs) VCC = 2 V 0.5 V
VCC = 2.3 V to 2.7 V VCC × 0.3
VCC = 3 V to 3.6 V VCC × 0.3
VCC = 4.5 V to 5.5 V VCC × 0.3
VI Control input voltage 0 5.5 V
VIO Input or output voltage 0 VCC V
Δt/Δv Input transition rise or fall rate VCC = 2.3 V to 2.7 V 200 ns/V
VCC = 3 V to 3.6 V 100
VCC = 4.5 V to 5.5 V 20
TA Operating free-air temperature –40 85 °C
(1) With supply voltages at or near 2 V, the analog switch on-state resistance becomes very nonlinear. TI recommends that only digital signals be transmitted at these low supply voltages.
(2) All unused inputs of the device must be held at VCC or GND to ensure proper device operation. See Implications of Slow or Floating CMOS Inputs (SCBA004).

6.4 Thermal Information

THERMAL METRIC(1) SN74LV4052A UNIT
D
(SOIC)		 DB
(SSOP)		 DGV
(TVSOP)		 N
(PDIP)		 NS
(SO)		 PW
(TSSOP)		 RGY
(VQFN)
16 PINS 16 PINS 16 PINS 16 PINS 16 PINS 16 PINS 16 PINS
RθJA Junction-to-ambient thermal resistance 90.9 102.8 125.7 54.8 89.7 113.2 48.9 °C/W
RθJC(top) Junction-to-case (top) thermal resistance 51.9 53.3 50.9 42.1 48.1 48.2 46.9 °C/W
RθJB Junction-to-board thermal resistance 48 53.4 57.5 34.8 50.1 58.3 25 °C/W
ψJT Junction-to-top characterization parameter 18.6 16.5 5.6 26.9 16.7 6.3 2 °C/W
ψJB Junction-to-board characterization parameter 47.8 52.9 57 34.7 49.8 57.8 25 °C/W
RθJC(bot) Junction-to-case (bottom) thermal resistance — — — — — — 11.7 °C/W
(1) For more information about traditional and new thermal metrics, see the Semiconductor and IC Package Thermal Metrics application report.

6.5 Electrical Characteristics

over operating free-air temperature range (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
ron On-state switch resistance IT = 2 mA, VI = VCC or GND, VINH = VIL (see Figure 2) VCC = 2.3 V TA = 25°C 43 180 Ω
TA = –40 to 85°C 225
VCC = 3 V TA = 25°C 34 150
TA = –40 to 85°C 190
VCC = 4.5 V TA = 25°C 25 75
TA = –40 to 85°C 100
ron(p) Peak on-state resistance IT = 2 mA, VI = VCC to GND, VINH = VIL VCC = 2.3 V TA = 25°C 133 500 Ω
TA = –40 to 85°C 600
VCC = 3 V TA = 25°C 63 180
TA = –40 to 85°C 225
VCC = 4.5 V TA = 25°C 35 100
TA = –40 to 85°C 125
Δron Difference in on-state resistance between switches IT = 2 mA, VI = VCC to GND, VINH = VIL VCC = 2.3 V TA = 25°C 1.5 30 Ω
TA = –40 to 85°C 40
VCC = 3 V TA = 25°C 1.1 20
TA = –40 to 85°C 30
VCC = 4.5 V TA = 25°C 0.7 15
TA = –40 to 85°C 20
II Control input current VI = 5.5 V or GND, and VCC = 0 to 5.5 V TA = 25°C ±0.1 µA
TA = –40 to 85°C ±1
IS(off) OFF-state switch leakage current VI = VCC and VO = GND, or VI = GND and VO = VCC, VINH = VIH , and
VCC = 5.5 V (see Figure 3)		 TA = 25°C ±0.1 µA
TA = –40 to 85°C ±1
IS(on) ON-state switch leakage current VI = VCC or GND, VINH = VIL, and
VCC = 5.5 V (see Figure 4) 		TA = 25°C ±0.1 µA
TA = –40 to 85°C ±1
ICC Supply current VI = VCC or GND, VCC = 5.5 V, and TA = –40 to 85°C 20 µA
CIC Control input capacitance f = 10 MHz, VCC = 3.3 V, and TA = 25°C 2.1 pF
CIS Common terminal capacitance VCC = 3.3 V and TA = 25°C 13.1 pF
COS Switch terminal capacitance VCC = 3.3 V and TA = 25°C 5.6 pF
CF Feedthrough capacitance VCC = 3.3 V and TA = 25°C 0.5 pF

6.6 Switching Characteristics: VCC = 2.5 V ± 0.2 V

over recommended operating free-air temperature range and VCC = 2.5 V ± 0.2 V (unless otherwise noted)
PARAMETER FROM
(INPUT)		 TO
(OUTPUT)		 TEST CONDITIONS MIN TYP MAX UNIT
tPLH
tPHL		 Propagation
delay time		 COM or Y Y or COM CL = 15 pF
(see Figure 5)		 TA = 25°C 1.9 10 ns
TA = –40 to 85°C 16
tPZH
tPZL		 Enable delay time INH COM or Y CL = 15 pF
(seeFigure 6 )		 TA = 25°C 8 18 ns
TA = –40 to 85°C 23
tPHZ
tPLZ		 Disable delay time INH COM or Y CL = 15 pF
(see Figure 6)		 TA = 25°C 8.3 18 ns
TA = –40 to 85°C 23
tPLH
tPHL		 Propagation
delay time		 COM or Y Y or COM CL = 50 pF
(see Figure 5)		 TA = 25°C 3.8 12 ns
TA = –40 to 85°C 18
tPZH
tPZL		 Enable delay time INH COM or Y CL = 50 pF
(see Figure 6)		 TA = 25°C 9.4 28 ns
TA = –40 to 85°C 35
tPHZ
tPLZ		 Disable delay time INH COM or Y CL = 50 pF
(see Figure 6)		 TA = 25°C 12.4 28 ns
TA = –40 to 85°C 35

6.7 Switching Characteristics: VCC = 3.3 V ± 0.3 V

over recommended operating free-air temperature range and VCC = 3.3 V ± 0.3 V (unless otherwise noted)
PARAMETER FROM
(INPUT)		 TO
(OUTPUT)		 TEST CONDITIONS MIN TYP MAX UNIT
tPLH
tPHL		 Propagation
delay time		 COM or Y Y or COM CL = 15 pF
(see Figure 5)		 TA = 25°C 1.2 6 ns
TA = –40 to 85°C 10
tPZH
tPZL		 Enable delay time INH COM or Y CL = 15 pF
(seeFigure 6 )		 TA = 25°C 5.7 12 ns
TA = –40 to 85°C 15
tPHZ
tPLZ		 Disable delay time INH COM or Y CL = 15 pF
(see Figure 6)		 TA = 25°C 6.6 12 ns
TA = –40 to 85°C 15
tPLH
tPHL		 Propagation
delay time		 COM or Y Y or COM CL = 50 pF
(see Figure 5)		 TA = 25°C 2.5 9 ns
TA = –40 to 85°C 12
tPZH
tPZL		 Enable delay time INH COM or Y CL = 50 pF
(see Figure 6)		 TA = 25°C 6.7 20 ns
TA = –40 to 85°C 25
tPHZ
tPLZ		 Disable delay time INH COM or Y CL = 50 pF
(see Figure 6)		 TA = 25°C 9.5 20 ns
TA = –40 to 85°C 25

6.8 Switching Characteristics: VCC = 5 V ± 0.5 V

over recommended operating free-air temperature range and VCC = 5 V ± 0.5 V (unless otherwise noted)
PARAMETER FROM
(INPUT)		 TO
(OUTPUT)		 TEST CONDITIONS MIN TYP MAX UNIT
tPLH
tPHL		 Propagation
delay time		 COM or Y Y or COM CL = 15 pF
(see Figure 5)		 TA = 25°C 0.7 4 ns
TA = –40 to 85°C 7
tPZH
tPZL		 Enable delay time INH COM or Y CL = 15 pF
(seeFigure 6 )		 TA = 25°C 4 8 ns
TA = –40 to 85°C 10
tPHZ
tPLZ		 Disable delay time INH COM or Y CL = 15 pF
(see Figure 6)		 TA = 25°C 5 8 ns
TA = –40 to 85°C 10
tPLH
tPHL		 Propagation
delay time		 COM or Y Y or COM CL = 50 pF
(see Figure 5)		 TA = 25°C 1.5 6 ns
TA = –40 to 85°C 8
tPZH
tPZL		 Enable delay time INH COM or Y CL = 50 pF
(see Figure 6)		 TA = 25°C 4.7 14 ns
TA = –40 to 85°C 18
tPHZ
tPLZ		 Disable delay time INH COM or Y CL = 50 pF
(see Figure 6)		 TA = 25°C 6.9 14 ns
TA = –40 to 85°C 18

6.9 Switching Characteristics: Analog

over recommended operating free-air temperature range (unless otherwise noted)
PARAMETER FROM
(INPUT)		 TO
(OUTPUT)		 TEST CONDITIONS MIN TYP MAX UNIT
Frequency response
(switch on)		 COM or Y Y or COM CL = 50 pF, RL = 600 Ω,
fin = 1 MHz (sine wave)
(see Figure 7)(1)		 VCC = 2.3 V 30 MHz
VCC = 3 V 35
VCC = 4.5 V 50
Crosstalk (between any switches) COM or Y Y or COM CL = 50 pF, RL = 600 Ω,
fin = 1 MHz (sine wave)
(see Figure 8)(2)		 VCC = 2.3 V –45 dB
VCC = 3 V –45
VCC = 4.5 V –45
Crosstalk (control input to signal output) INH COM or Y CL = 50 pF, RL = 600 Ω,
fin = 1 MHz (sine wave)
(see Figure 9)		 VCC = 2.3 V 20 mV
VCC = 3 V 35
VCC = 4.5 V 65
Feedthrough attenuation
(switch off)		 COM or Y Y or COM CL = 50 pF, RL = 600 Ω,
fin = 1 MHz (sine wave)
(see Figure 10)(2) 		VCC = 2.3 V –45 dB
VCC = 3 V –45
VCC = 4.5 V –45
Sine-wave distortion COM or Y Y or COM CL = 50 pF,
RL = 10 kΩ,
fin = 1 kHz
(sine wave)
(see Figure 11) 		VI = 2 Vp-p and
VCC = 2.3 V		 0.1%
VI = 2.5 Vp-p and
VCC = 3 V		 0.1%
VI = 4 Vp-p and
VCC = 4.5 V		 0.1%
(1) Adjust fin voltage to obtain 0 dBm at output. Increase fin frequency until dB meter reads –3 dB.
(2) Adjust fin voltage to obtain 0 dBm at input.

6.10 Operating Characteristics

TA = 25°C
PARAMETER TEST CONDITIONS TYP UNIT
Cpd Power dissipation capacitance CL = 50 pF and f = 10 MHz 11.8 pF

6.11 Typical Characteristics

SN74LV4052A D001_scls429.gif Figure 1. Typical Propagation Delay vs Vcc