ZHCSD60D June   2012  – August 2018 LMZ20502

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     Device Images
      1.      简化原理图
      2.      VOUT = 1.8V 时自动模式下的典型效率
  4. 4 修订历史记录
  5. 5 Pin Configuration and Functions
    1.     Pin Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 System Characteristics
    7. 6.7 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Nano Scale Package
      2. 7.3.2 Internal Synchronous Rectifier
      3. 7.3.3 Current Limit Protection
      4. 7.3.4 Start-Up
      5. 7.3.5 Dropout Behavior
      6. 7.3.6 Power Good Flag Function
      7. 7.3.7 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 PWM Operation
      2. 7.4.2 PFM Operation
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Detailed Design Procedure
        1. 8.2.1.1 Custom Design With WEBENCH® Tools
        2. 8.2.1.2 Setting The Output Voltage
        3. 8.2.1.3 Output and Feed-Forward Capacitors
        4. 8.2.1.4 Input Capacitors
        5. 8.2.1.5 Maximum Ambient Temperature
        6. 8.2.1.6 Options
      2. 8.2.2 Application Curves
    3. 8.3 Do's and Don'ts
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
    3. 10.3 Soldering Information
  11. 11器件和文档支持
    1. 11.1 器件支持
      1. 11.1.1 第三方产品免责声明
      2. 11.1.2 开发支持
        1. 11.1.2.1 使用 WEBENCH® 工具创建定制设计
      3. 11.1.3 文档支持
        1. 11.1.3.1 相关文档
    2. 11.2 接收文档更新通知
    3. 11.3 社区资源
    4. 11.4 商标
    5. 11.5 静电放电警告
    6. 11.6 术语表
  12. 12机械、封装和可订购信息
    1. 12.1 Tape and Reel Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • SIL|8
散热焊盘机械数据 (封装 | 引脚)
订购信息

6.5 Electrical Characteristics

Limits apply over the recommended operating junction temperature range of –40°C to 125°C, unless otherwise noted. Minimum and maximum limits are verified through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only. Unless otherwise stated the following conditions apply: VIN = 3.6 V
PARAMETER TEST CONDITIONS MIN(1) TYP MAX(1) UNIT
VFB Feedback voltage VIN = 3.6 V 0.594 0.6 0.606 V
IQ_AUTO Operating quiescent current in AUTO mode AUTO mode, VFB = 0.8V 72 90 µA
IQ_PWM Operating quiescent current in forced PWM mode PWM mode, VFB = 0.8V 490 620 µA
IQ_off Shutdown quiescent current(2) VIN = 3.6 V, VEN = 0.0 V 0.7 1.5 µA
VIN = 5.5 V, VEN = 0.0 V 1.0 2.4
VUVLO Input supply under-voltage lock-out thresholds Rising 2.5 V
Falling 2.3
VEN High Level Input Voltage VIH 1.4 V
Low Level Input Voltage VIL 0.4
VMODE High Level Input Voltage VIH 1.2 V
Low Level Input Voltage VIL 0.4
I LIM Peak switch current limit(3) 2.1 2.7 A
Fosc Internal oscillator frequency 2.5 3.0 3.2 MHz
TON Minimum switch on-time(5) 50 ns
Tss Soft start time(5) 800 µs
RPG Power good flag pull-down Rdson 40 70 110 Ω
VPG1 Power good flag, under-voltage trip(4) % of feedback voltage, rising 92%
VPG2 Power good flag, under-voltage trip(4) % of feedback voltage, falling 88%
VPG3 Power good flag, over-voltage trip(4) % of feedback voltage, rising 112%
VPG4 Power good flag, over-voltage trip(4) % of feedback voltage, falling 108%
TSD Thermal shutdown(5) Rising threshold 159 °C
Thermal shutdown hysteresis(5) 15 °C
(1) MIN and MAX limits are 100% production tested at 25°C. Limits over the operating temperature range are verified through correlation using Statistical Quality Control (SQC) methods. Limits are used to calculate Average Outgoing Quality Level (AOQL).
(2) Shutdown current includes leakage current of the switching transistors.
(3) This is the peak switch current limit measured with a slow current ramp. Due to inherent delays in the current limit comparator, the peak current limit measured at 3MHz will be larger.
(4) See Power Good Flag Function for explanation of voltage levels.
(5) This parameter is not tested in production.