SCAS862G November   2008  – July 2016 CDCE62005

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Thermal Information
    4. 6.4 Electrical Characteristics
    5. 6.5 Timing Requirements
    6. 6.6 SPI Bus Timing Characteristics
    7. 6.7 Typical Characteristics
  7. Parameter Measurement Information
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagrams
      1. 8.2.1 Interface and Control Block
      2. 8.2.2 Input Block
      3. 8.2.3 Output Block
      4. 8.2.4 Clock Divider Module 0-4
      5. 8.2.5 Synthesizer Block
      6. 8.2.6 Computing The Output Frequency
    3. 8.3 Feature Description
      1. 8.3.1  Phase Noise Analysis
      2. 8.3.2  Output To Output Isolation
      3. 8.3.3  Device Control
      4. 8.3.4  External Control Pins
      5. 8.3.5  Input Block
        1. 8.3.5.1  Universal Input Buffers (UIB)
        2. 8.3.5.2  LVDS Fail Safe Mode
        3. 8.3.5.3  Smart Multiplexer Controls
        4. 8.3.5.4  Smart Multiplexer Auto Mode
        5. 8.3.5.5  Smart Multiplexer Dividers
        6. 8.3.5.6  Output Block
        7. 8.3.5.7  Output Multiplexer Control
        8. 8.3.5.8  Output Buffer Control
        9. 8.3.5.9  Output Buffer Control - LVCMOS Configurations
        10. 8.3.5.10 Output Dividers
        11. 8.3.5.11 Digital Phase Adjust
        12. 8.3.5.12 Phase Adjust Example
        13. 8.3.5.13 Valid Register Settings for Digital Phase Adjust Blocks
        14. 8.3.5.14 Output Synchronization
        15. 8.3.5.15 Auxiliary Output
        16. 8.3.5.16 Synthesizer Block
        17. 8.3.5.17 Input Divider
        18. 8.3.5.18 Feedback and Feedback Bypass Divider
          1. 8.3.5.18.1 VCO Select
          2. 8.3.5.18.2 Prescaler
          3. 8.3.5.18.3 Charge Pump Current Settings
          4. 8.3.5.18.4 Loop Filter
        19. 8.3.5.19 Internal Loop Filter Component Configuration
        20. 8.3.5.20 External Loop Filter Component Configuration
      6. 8.3.6  Digital Lock Detect
      7. 8.3.7  Crystal Input Interference
      8. 8.3.8  VCO Calibration
      9. 8.3.9  Startup Time Estimation
      10. 8.3.10 Analog Lock Detect
    4. 8.4 Device Functional Modes
      1. 8.4.1 Fan-Out Buffer
      2. 8.4.2 Clock Generator
      3. 8.4.3 Jitter Cleaner - Mixed Mode
        1. 8.4.3.1 Clocking ADCs with the CDCE62005
        2. 8.4.3.2 CDCE62005 SERDES Startup Mode
    5. 8.5 Programming
      1. 8.5.1 Interface and Control Block
        1. 8.5.1.1 Serial Peripheral Interface (SPI)
        2. 8.5.1.2 CDCE62005 SPI Command Structure
        3. 8.5.1.3 SPI Interface Master
        4. 8.5.1.4 SPI Consecutive Read/Write Cycles to the CDCE62005
        5. 8.5.1.5 Writing to the CDCE62005
        6. 8.5.1.6 Reading from the CDCE62005
        7. 8.5.1.7 Writing to EEPROM
      2. 8.5.2 Device Configuration
    6. 8.6 Register Maps
      1. 8.6.1 Device Registers: Register 0 Address 0x00
      2. 8.6.2 Device Registers: Register 1 Address 0x01
      3. 8.6.3 Device Registers: Register 2 Address 0x02
      4. 8.6.4 Device Registers: Register 3 Address 0x03
      5. 8.6.5 Device Registers: Register 4 Address 0x04
      6. 8.6.6 Device Registers: Register 5 Address 0x05
      7. 8.6.7 Device Registers: Register 6 Address 0x06
      8. 8.6.8 Device Registers: Register 7 Address 0x07
      9. 8.6.9 Device Registers: Register 8 Address 0x08
  9. Application and Implementation
    1. 9.1 Application Information
      1. 9.1.1 Frequency Synthesizer
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Trademarks
    2. 12.2 Documentation Support
    3. 12.3 Electrostatic Discharge Caution
    4. 12.4 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

4 Revision History

Changes from F Revision (January 2015) to G Revision

  • Removed minimum and maximum values and added typical value to on-chip load capacitance in Electrical Characteristics Go

Changes from E Revision (July 2014) to F Revision

  • Added Low Noise Clock Generator: 550 fs rms typical (10 kHz to 20 MHz Integration Bandwidth), FC = 100 MHz in Features sectionGo
  • Added Low Noise Jitter Cleaner: 2.6 ps rms typical (10 kHz to 20 MHz Integration Bandwidth), FC = 100 MHz in Features sectionGo

Changes from D Revision (April 2011) to E Revision

  • Changed Added, updated, or revised the following sections: Features; Application and Implementation; Power Supply Recommendations ; Layout ; Device and Documentation Support ; Mechanical, Packaging, and Ordering Information Go
  • Changed Bit Name from LOCKW(3) to LOCKW(2)Go
  • Changed Bit Name from LOCKW(2) to LOCKW(1)Go
  • Changed Bit Name from LOCKW(1) to LOCKW(0)Go
  • Changed REGISTER.BIT from 5.26 to 5.25, from 5.25 to 5.24, from 5.24 to 5.23, from 5.23 to 5.22. Go

Changes from C Revision (February, 2010) to D Revision

  • Changed 0 to 1 in SPI_LE descriptionGo
  • Changed last sentence in Description column of Pin 46 and Pin 2Go
  • Changed Outputs to Output 1 in PLVCMOS Test Conditions, changed PD to Power_Down in LVCMOS INPUT MODE, and deleted (LVCMOS signals) from Input capacitance in Electrical CharacteristicsGo
  • Changed TIMING REQUIREMENTS tableGo
  • Added 1 row to TIMING Requirements table - Input Clock Slew Rate...Go
  • Added SPI CONTROL INTERFACE TIMING sectionGo
  • Changed Functional Block Diagrams Go
  • Changed pin names in Figure 11Go
  • Changed Feedback Divider value in Figure 15Go
  • Changed are 25°C to (nominal conditions) in Table 3Go
  • Changed Poer Down state SPI Port status from ON to OFF in Table 4Go
  • Changed Figure 18 Go
  • Changed Table 5 Go
  • Added note to Table 7Go
  • Changed AUXSEL from X to 0 in Table 7Go
  • Added note to Table 21Go
  • Added new sections Crystal Input Interface, VCO Calibration, and Startup Time Estimation.Go
  • Changed Serial Peripheral Interface (SPI) sectionGo
  • Changed Table 6 to Table 38 in Writing to EEPROM sectionGo
  • Changed RAM bit 1 and RAM bit 2 in Table 43Go
  • Added note and changed Smart MUX description in Table 45Go
  • Changed 1 to 0 in rows PRINVBB and SECINVB6 in the description columnGo
  • Changed RAM bit 22 from 0 to 1 and changed RAM bit 24 from 0 to 1 in Table 47Go
  • Changed Table 48 Go

Changes from B Revision (July, 2009) to C Revision

  • Deleted LVCMOS INPUT MODE (AUX_IN) section from Electrical Characteristics tableGo