ZHCSNB0D 数据表 | 德州仪器 TI.com.cn

ZHCSNB0D february 2021 – june 2023 AFE7950

PRODUCTION DATA

封装选项

机械数据 (封装 | 引脚)

ABJ|400
- MCBG079C
ALK|400
- MPBGAU3B

散热焊盘机械数据 (封装 | 引脚)

订购信息

6.12.7 TX Typical Characteristics at 9.6 GHz

Typical values at T_A = +25°C with nominal supplies. Default conditions: TX input data rate = 491.52MSPS, f_DAC = 11796.48MSPS (8x interpolation), Mixed mode, 1^st Nyquist zone output, PLL clock mode with f_REF = 1474.56 MHz, A_OUT = –1 dBFS, DSA = 0 dB, Sin(x)/x enabled, DSA calibrated, TX Clock Dither Enabled, 9.6 GHz matching

Includes PCB and cable losses.

Figure 6-233 TX Output Power vs Frequency at 9.61 GHz

Includes PCB and cable losses.

Figure 6-235 TX Output Power vs DSA Setting at 9.61 GHz

Figure 6-237 TX DSA Calibrated Amplitude Differential Nonlinearity

Figure 6-239 TX DSA Calibrated Amplitude Differential Nonlinearity

Figure 6-241 TX DSA Calibrated Amplitude Integrated Nonlinearity

Figure 6-243 TX DSA Calibrated Amplitude Integrated Nonlinearity

Figure 6-245 TX DSA Calibrated Phase Differential Nonlinearity

Figure 6-247 TX DSA Calibrated Phase Differential Nonlinearity

Figure 6-249 TX DSA Calibrated Phase Integrated Nonlinearity

Figure 6-251 TX DSA Calibrated Amplitude Integrated Nonlinearity

50-MHz tone spacing

Figure 6-253 TX IMD3 vs Digital Amplitude at 9.61 GHz

50-MHz tone spacing

Figure 6-255 TX IMD3 vs DSA Setting at 9.61 GHz

Figure 6-257 TX IMD3 vs Tone Spacing at 9.61 GHz

Figure 6-259 TX IMD3 vs Tone Spacing at 9.61 GHz

Figure 6-261 TX NSD vs Digital Amplitude at 9.61 GHz

Figure 6-263 TX NSD vs DSA Setting at 9.61 GHz

50-MHz tone spacing

Figure 6-265 TX 2-tone SFDR vs Digital Amplitude at 9.61 GHz

Includes PCB and cable losses.

Figure 6-267 TX Single Tone Spectrum at 9.61 GHz and -1dBFS (1.2GHz BW)

Includes PCB and cable losses.

Figure 6-269 TX Single Tone Spectrum at 9.61 GHz and -6dBFS (1.2GHz BW)

Includes PCB and cable losses.

Figure 6-271 TX Single Tone Spectrum at 9.61 GHz and -12dBFS (1.2GHz BW)

Includes PCB and cable losses, 50-MHz tone spacing.

Figure 6-273 TX 2-Tone Spectrum at 9.61 GHz and -7dBFS (1.2GHz BW)

Includes PCB and cable losses, 50-MHz tone spacing.

Figure 6-275 TX 2-Tone Spectrum at 9.61 GHz and -13dBFS (1.2GHz BW)

Includes PCB and cable losses, 50-MHz tone spacing.

Figure 6-277 TX 2-Tone Spectrum at 9.61 GHz and -30dBFS Each (1.2GHz BW)

Includes PCB and cable losses, 50-MHz tone spacing.

Figure 6-279 TX 2-Tone Spectrum at 9.61 GHz and -60dBFS Each (1.2GHz BW)

Figure 6-281 TX NR100MHz ACPR vs DSA Setting at 9.61 GHz

Figure 6-283 TX NR100MHz EVM vs DSA Setting at 9.61 GHz

Includes PCB and cable losses.

Figure 6-234 TX Output Power vs Frequency at 9.61 GHz

Figure 6-236 TX DSA Uncalibrated Amplitude Differential Nonlinearity

Figure 6-238 TX DSA Uncalibrated Amplitude Differential Nonlinearity

Figure 6-240 TX DSA Uncalibrated Amplitude Integrated Nonlinearity

Figure 6-242 TX DSA Uncalibrated Amplitude Integrated Nonlinearity

Figure 6-244 TX DSA Uncalibrated Phase Differential Nonlinearity

Figure 6-246 TX DSA Uncalibrated Phase Differential Nonlinearity

Figure 6-248 TX DSA Uncalibrated Phase Integrated Nonlinearity

Figure 6-250 TX DSA Uncalibrated Phase Integrated Nonlinearity

50-MHz tone spacing

Figure 6-252 TX IMD3 vs Digital Amplitude at 9.61 GHz

50-MHz tone spacing

Figure 6-254 TX IMD3 vs DSA Setting at 9.61 GHz

50-MHz tone spacing

Figure 6-256 TX IMD3 vs DSA Setting at 9.61 GHz

Figure 6-258 TX IMD3 vs Tone Spacing at 9.61 GHz

Figure 6-260 TX NSD vs Digital Amplitude at 9.61 GHz

Figure 6-262 TX NSD vs DSA Setting at 9.61 GHz

Figure 6-264 TX NSD vs DSA Setting at 9.61 GHz

Includes PCB and cable losses.

Figure 6-266 TX Single Tone Spectrum at 9.61 GHz and -1dBFS (wideband)

Includes PCB and cable losses.

Figure 6-268 TX Single Tone Spectrum at 9.61 GHz and -6dBFS (wideband)

Includes PCB and cable losses.

Figure 6-270 TX Single Tone Spectrum at 9.61 GHz and -12dBFS (wideband)

Includes PCB and cable losses, 50-MHz tone spacing.

Figure 6-272 TX 2-Tone Spectrum at 9.61 GHz and -7dBFS (wideband)

Includes PCB and cable losses, 50-MHz tone spacing.

Figure 6-274 TX 2-Tone Spectrum at 9.61 GHz and -13dBFS (wideband)

Includes PCB and cable losses, 50-MHz tone spacing.

Figure 6-276 TX 2-Tone Spectrum at 9.61 GHz and -30dBFS Each (wideband)

Includes PCB and cable losses, 50-MHz tone spacing.

Figure 6-278 TX 2-Tone Spectrum at 9.61 GHz and -60dBFS Each (wideband)

Single sideband, external clock mode, input clock phase noise removed

Figure 6-280 TX Additive Phase Noise vs Offset Frequency at 9.61 GHz

Figure 6-282 TX NR100MHz alt-ACPR vs DSA Setting at 9.61 GHz

Includes PCB and cable losses.

Figure 6-284 TX NR100MHz Output Spectrum at 9.61 GHz

Includes PCB and cable losses.

Figure 6-285 TX 4xNR100MHz Output Spectrum at 9.61 GHz

Note:

Includes PCB and cable losses.

Figure 6-286 TX 100MHz NR EVM at 9.61 GHz