ZHCSF89B June   2011  – June 2016 LM3559

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 修订历史记录
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 I2C Timing Requirements (SCL, SDA)
    7. 6.7 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Power Amplifier Synchronization (TX1)
      2. 7.3.2  Input Voltage Flash Monitor Fault
      3. 7.3.3  Independent LED Control
      4. 7.3.4  Hardware Torch
      5. 7.3.5  Fault Protections
        1. 7.3.5.1 Overvoltage Protection
        2. 7.3.5.2 Current Limit
        3. 7.3.5.3 Flash Timeout
        4. 7.3.5.4 Indicator LED/Thermistor (LEDI/NTC)
          1. 7.3.5.4.1 Message Indicator Current Source (LEDI/NTC)
            1. 7.3.5.4.1.1 Message Indicator Example 1 (Single Pulse With Dead Time):
            2. 7.3.5.4.1.2 Message Indicator Example 2 (Multiple Pulses With Dead Time):
            3. 7.3.5.4.1.3 Updating The Message Indicator
      6. 7.3.6  Input Voltage (VIN ) Monitor
      7. 7.3.7  VIN Flash Monitor (Flash Current Rising)
      8. 7.3.8  Last Flash Register
      9. 7.3.9  LED Voltage Monitor
      10. 7.3.10 ADC Delay
      11. 7.3.11 Flags Register and Fault Indicators
        1. 7.3.11.1 Flash Timeout
        2. 7.3.11.2 Thermal Shutdown
        3. 7.3.11.3 LED Fault
        4. 7.3.11.4 TX1 and TX2 Interrupt Flags
        5. 7.3.11.5 LED Thermal Fault (NTC Flag)
        6. 7.3.11.6 Input Voltage Monitor Fault
    4. 7.4 Device Functional Modes
      1. 7.4.1  Start-Up (Enabling the Device)
      2. 7.4.2  Pass Mode
      3. 7.4.3  Flash Mode
      4. 7.4.4  Torch Mode
      5. 7.4.5  Privacy-Indicate Mode
      6. 7.4.6  GPIO1 Mode
      7. 7.4.7  TX2/INT/GPIO2
      8. 7.4.8  TX2 Mode
        1. 7.4.8.1 TX2 Shutdown
      9. 7.4.9  GPIO2 Mode
      10. 7.4.10 Interrupt Output (INT Mode)
      11. 7.4.11 NTC Mode
      12. 7.4.12 Alternate External Torch (AET Mode)
      13. 7.4.13 Automatic Conversion Mode
      14. 7.4.14 Manual Conversion Mode
    5. 7.5 Programming
      1. 7.5.1 I2C-Compatible Interface
        1. 7.5.1.1 START and STOP Conditions
        2. 7.5.1.2 I2C-Compatible Chip Address
        3. 7.5.1.3 Transferring Data
    6. 7.6 Register Maps
      1. 7.6.1  Enable Register
      2. 7.6.2  Torch Brightness Register
      3. 7.6.3  Flash Brightness Register
      4. 7.6.4  Flash Duration Register
      5. 7.6.5  Flags Register
      6. 7.6.6  Configuration Register 1
      7. 7.6.7  Configuration Register 2
      8. 7.6.8  GPIO Register
      9. 7.6.9  Last Flash Register
      10. 7.6.10 VLED Monitor Register
      11. 7.6.11 ADC Delay Register
      12. 7.6.12 Input Voltage Monitor Register
      13. 7.6.13 Privacy Register
      14. 7.6.14 Privacy PWM Period Register
      15. 7.6.15 Indicator Register
      16. 7.6.16 Indicator Blinking Register
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Applications
      1. 8.2.1 LM3559 Typical Application
        1. 8.2.1.1 Design Requirements
        2. 8.2.1.2 Detailed Design Procedure
          1. 8.2.1.2.1 Output Capacitor Selection
          2. 8.2.1.2.2 Input Capacitor Selection
          3. 8.2.1.2.3 Inductor Selection
        3. 8.2.1.3 Application Curves
      2. 8.2.2 LM3559 Typical Application Circuit With Thermistor
        1. 8.2.2.1 Detailed Design Procedure
          1. 8.2.2.1.1 NTC Thermistor Selection
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11器件和文档支持
    1. 11.1 器件支持
      1. 11.1.1 Third-Party Products Disclaimer
    2. 11.2 文档支持
      1. 11.2.1 相关文档　
    3. 11.3 接收文档更新通知
    4. 11.4 社区资源
    5. 11.5 商标
    6. 11.6 静电放电警告
    7. 11.7 Glossary
  12. 12机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

5 Pin Configuration and Functions

YZR Package
16-Pin DSBGA
Top View
LM3559 30102802.gif

Pin Functions

PIN TYPE DESCRIPTION
NO. NAME
A1 LED1 Power High-side current source output for flash LED1
A2, B2 OUT Power Step-up DC-DC converter output. Connect a 10-µF ceramic capacitor between this pin and GND.
A3, B3 SW Power Drain connection for internal NMOS and synchronous PMOS switches
A4, B4 GND Ground Ground
B1 LED2 Output High-side current source output for flash LED2
C1 LEDI/NTC Input/Output Configureable as a high-side current source output for indicator LED or comparator input for LED temperature sensing
C2 TX1/TORCH/GPIO1 Input/Output Configureable as a dual-polarity RF power amplifier synchronization input, a hardware torch mode enable, or as a general purpose logic I/O. This pin has an internal 300-kΩ pulldown to GND.
C3 STROBE Input Active high hardware flash enable. Drive STROBE high to turn on the flash current pulse. This pin has an internal 300-kΩ pulldown to GND.
C4 IN Power Input voltage connection. Connect IN to the input supply, and bypass to GND with a minimum 10-µF or larger ceramic capacitor.
D1 TX2/INT/GPIO2 Input/Output Configurable as a dual-polarity power amplifier synchronization input, an interrupt output, or as a general purpose logic I/O. This pin has an internal 300-kΩ pulldown to GND.
D2 SDA Input/Output Serial data input output. High impedance in shutdown or in power down.
D3 SCL Input Serial clock input. High impedance in shutdown or in power down.
D4 HWEN Input Logic high hardware enable. HWEN is a high impedance input and is normally connected with an external pullup resistor to a logic high voltage.