ZHCSTG3H September   1999  – March 2024 LM1084

PRODUCTION DATA  

  1.   1
  2. 1 特性
  3. 2 应用
  4. 3 说明
  5. 4 Pin Configuration and Functions
  6. 5 Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Typical Characteristics
  7. 6 Detailed Description
    1. 6.1 Overview
    2. 6.2 Functional Block Diagram
    3. 6.3 Feature Description
      1. 6.3.1 Ripple Rejection
      2. 6.3.2 Load Regulation
      3. 6.3.3 Overload Recovery
    4. 6.4 Device Functional Modes
      1. 6.4.1 Output Voltage
      2. 6.4.2 Stability Consideration
      3. 6.4.3 Protection Diodes
  8. 7 Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Applications
      1. 7.2.1  1.2-V to 15-V Adjustable Regulator
        1. 7.2.1.1 Design Requirements
        2. 7.2.1.2 Detailed Design Procedure
        3. 7.2.1.3 Application Curve
      2. 7.2.2  Adjustable at 5 V
      3. 7.2.3  5-V Regulator With Shutdown
      4. 7.2.4  Battery Charger
      5. 7.2.5  Adjustable Fixed Regulator
      6. 7.2.6  Regulator with Reference
      7. 7.2.7  High Current Lamp Driver Protection
      8. 7.2.8  Battery Backup Regulated Supply
      9. 7.2.9  Ripple Rejection Enhancement
      10. 7.2.10 Automatic Light Control
      11. 7.2.11 Generating Negative Supply Voltage
      12. 7.2.12 Remote Sensing
    3. 7.3 Power Supply Recommendations
    4. 7.4 Layout
      1. 7.4.1 Layout Guidelines
        1. 7.4.1.1 Thermal Considerations
      2. 7.4.2 Layout Example
  9. 8 Device and Documentation Support
    1. 8.1 接收文档更新通知
    2. 8.2 支持资源
    3. 8.3 Trademarks
    4. 8.4 静电放电警告
    5. 8.5 术语表
  10. 9 Revision History
  11. 10Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.2.7 High Current Lamp Driver Protection

A simple constant current source with protection can be designed by controlling the impedance between the lamp and ground. The LM1084-ADJ shown in Figure 7-7 makes use of an external TTL or CMOS input to drive the NPN transistor. This pulls the output of the regulator to a few tenths of a volt and puts the part into current limit. Releasing the logic will reduce the current flow across the lamp into the normal operating current thereby protecting the lamp during startup.

GUID-1279E92B-81CD-415A-A140-9B84E20DB541-low.pngFigure 7-7 High Current Lamp Driver Protection