ZHCSRG2G May   2001  – December 2022 BQ2057C

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 说明（续）
  6. 6 Device Comparison Table
  7. 7 Pin Configuration and Functions
  8. 8 Specifications
    1. 8.1 Absolute Maximum Ratings
    2. 8.2 ESD Ratings
    3. 8.3 Recommended Operating Conditions
    4. 8.4 Thermal Information
    5. 8.5 Electrical Characteristics
    6. 8.6 Typical Characteristics
  9. 9 Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Current-Sense Input
      2. 9.3.2 Battery-Voltage Input
      3. 9.3.3 Temperature Sense Input
      4. 9.3.4 Charge-status Output
      5. 9.3.5 Charge-Control Output
      6. 9.3.6 Charge-Rate Compensation Input
      7. 9.3.7 Supply Voltage Input
  10. 10Application and Implementation
    1. 10.1 Application Information
      1. 10.1.1  Functional Description
      2. 10.1.2  Qualification and Precharge
      3. 10.1.3  Current Regulation Phase
      4. 10.1.4  Voltage Regulation Phase
      5. 10.1.5  Charge Termination and Recharge
      6. 10.1.6  Battery Temperature Monitoring
      7. 10.1.7  Charge Inhibit Function
      8. 10.1.8  Charge Status Indication
      9. 10.1.9  Low-power Sleep Mode
      10. 10.1.10 Selecting an External Pass-Transistor
      11. 10.1.11 Selecting Input Capacitor
      12. 10.1.12 Selecting Output Capacitor
      13. 10.1.13 Automatic Charge-rate Compensation
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
      2. 10.2.2 Detailed Design Procedure
      3. 10.2.3 Application Curves
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
      1. 12.1.1 Power FET
      2. 12.1.2 Current Sense
      3. 12.1.3 Voltage Sense
      4. 12.1.4 Enable (TS)
    2. 12.2 Layout Example
  13. 13Device and Documentation Support
    1. 13.1 Device Support
      1. 13.1.1 第三方产品免责声明
    2. 13.2 接收文档更新通知
    3. 13.3 支持资源
    4. 13.4 Trademarks
    5. 13.5 Electrostatic Discharge Caution
    6. 13.6 术语表
  14. 14Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • D|8
  • DGK|8
  • PW|8
散热焊盘机械数据 (封装 | 引脚)
订购信息

10.1.2 Qualification and Precharge

When power is applied, the BQ2057 starts a charge-cycle if a battery is already present or when a battery is inserted. Charge qualification is based on battery temperature and voltage. The BQ2057 suspends charge if the battery temperature is outside the V(TS1) to V(TS2) range and suspends charge until the battery temperature is within the allowed range. The BQ2057 also checks the battery voltage. If the battery voltage is below the precharge threshold V(min), the BQ2057 uses precharge to condition the battery. The conditioning charge rate I(PRECHG) is set at approximately 10% of the regulation current. The conditioning current also minimizes heat dissipation in the external pass-element during the initial stage of charge. See Figure 10-3 for a typical charge-profile.

GUID-20220527-SS0I-HLK2-B2WR-NKPG6SQSB6NQ-low.gif Figure 10-4 0.5-A Charger Using P-Channel MOSFET