TIDA-00443 is a 900W power factor regulator converter designed for inverter fed BLDC/PMSM motor based appliances. This reference design is a continuous conduction mode boost converter implemented using UCC28180 PFC controller and with all the necessary protections built-in. The design supports a wide AC input range from 195 VAC to 270 VAC and offers very high efficiency of >97%, over wide operating loads from 50% to 100%.
The boost follower configuration utilized in TIDA-00443 aids in reducing switching losses in the PFC regulator as well as in downstream inverter/converter. This reference design delivers an efficiency of ~98%, in boost follower configuration. In comparison to fixed voltage operation, this boost follower configuration saves an additional power of 5.2 W at 230 VAC and full load.
TIDA-00443 has been designed to meet the IEC-61000-2-3 iTHD limits of both Class A and Class D norms. In addition the design improves overall system performance with lower bus ripple, lower bus capacitance, lower RMS currents, and built-in front end protections. Hardware is designed and tested to pass conducted emissions, surge, and EFT as per EN55014 requirements for household appliances.
| 輸出電壓選項 | TIDA-00443.1 |
|---|---|
| Vin (最小值) (V) | 195 |
| Vin (最大值) (V) | 270 |
| Vout (Nom) (V) | 390 |
| Iout (最大) (A) | 2.3 |
| 輸出功率 (W) | 897 |
| 隔離式/非隔離式 | Non-Isolated |
| 輸入類型 | AC |
| 拓撲結構 | Boost- Non Sync |
已開發完全組裝的電路板，僅供測試與性能驗證，且為非賣品。
下載立即可用的系統檔案以加速您的設計流程。
| 類型 | 標題 | 下載最新的英文版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 設計指南 | 230-V, 900-W PFC With 98% Efficiency for Inverter-Fed Drives Reference Design (Rev. B) | 2016/5/12 | |||
| 技術文章 | Is PFC possible without input voltage sensing? | PDF | HTML | 2016/9/14 |