| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| Certificate | TPSF12C1EVM-FILTER EU Declaration of Conformity (DoC) | 2023年 5月 18日 | ||
| White paper | 主動 EMI 濾波器 IC 如何降低單相和三相電源系統中的共模輻射，並提升功率密度 | PDF | HTML | 2023年 2月 14日 | |
| Functional safety information | TPSF12C1 Functional Safety FIT Rate, FMD, and Pin FMA | PDF | HTML | 2022年 11月 11日 | |
| Certificate | TPSF12C1QEVM EU RoHS Declaration of Conformity (DoC) | 2022年 11月 1日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
Welcome to the TPSF12C1/-Q1 and TPSF12C3/-Q1 quickstart design tool. This standalone tool facilitates and assists the power-supply engineer with the design of an AEF circuit based on this family of common-mode AEF ICs. As such, the user can expeditiously arrive at an optimized design to meet (...)
This Mathcad file is offered to predict the stability of a voltage-sense current-inject AEF circuit, in particular with respect to TI's TPSF12C1/3/-Q1 family of common-mode (CM) AEF ICs, and to assist with component selection. The model is inclusive of most parasitic effects and can be used as a (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23-THN (DYY) | 14 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。
Welcome to the TPSF12C1/-Q1 and TPSF12C3/-Q1 quickstart design tool. This standalone tool facilitates and assists the power supply engineer with the design of an active EMI filter (AEF) circuit based on this family of common-mode AEF ICs. As such, the user can expeditiously arrive at an optimized design to meet the application requirements.
TPSF12C1/3 mathcad file
This Mathcad worksheet is offered to predict the stability of a voltage-sense, current-inject active EMI filter (AEF) circuit, in particular with respect to TI's TPSF12C1/3/-Q1 family of AEF ICs, and to assist with component selection. The model is inclusive of most parasitc effects and can be used as a quick check of the loop gain and insertion loss prior to simulation, bench measurement and fine tuning.
The worksheet functions for single- and 3-phase AC systems and facilitates two ways of entering the CM choke parameters:
1. Using an equivalent circuit model with (a) resistive and capacitive parasitics – suitable for ferrite-core chokes; (b) a ladder network of three parallel RL circuits -- suitable for nanocrystalline chokes
2. Using measured impedance data (magnitude and phase).
The worksheet is ideal for knowledge capture, unit-aware calculation reuse and for engineering collaboration amongst design, systems & application engineers.