首頁 電源管理 電源保護開關與控制器 eFuse（整合式熱插拔）
首頁
電源管理
電源保護開關與控制器
eFuse（整合式熱插拔）

TPS25947

現行

具有整合式反向極性保護的 2.7V 至 23V、28mΩ、5.5A eFuse

立即訂購
產品規格表

TPS25947

現行
產品規格表 立即訂購

產品詳細資料

Vabsmax_cont (V) 28 Vin (max) (V) 23 Vin (min) (V) 2.7 Current limit (max) (A) 6 Current limit (min) (A) 0.5 Features Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Reverse current blocking always, Reverse polarity protection, Short-circuit protection, Thermal shutdown UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker, Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 28.3 Overvoltage response Clamp, Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.000426 Quiescent current (Iq) (max) (A) 0.00061 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
Vabsmax_cont (V) 28 Vin (max) (V) 23 Vin (min) (V) 2.7 Current limit (max) (A) 6 Current limit (min) (A) 0.5 Features Adjustable soft start, Current monitoring, Fault output, Overcurrent protection, Overvoltage protection, Power good signal, Reverse current blocking always, Reverse polarity protection, Short-circuit protection, Thermal shutdown UL recognition IEC62368, UL2367 Overcurrent response Circuit breaker, Current limiting Fault response Auto-retry, Latch-off Ron (typ) (mΩ) 28.3 Overvoltage response Clamp, Cut-off Rating Catalog Soft start Adjustable Quiescent current (Iq) (typ) (A) 0.000426 Quiescent current (Iq) (max) (A) 0.00061 Device type eFuses and hot swap controllers Operating temperature range (°C) -40 to 125
VQFN-HR (RPW) 10 4 mm² 2 x 2
  • Wide operating input voltage range: 2.7 V to 23 V
    • 28-V absolute maximum
    • Withstands negative voltages up to –15 V
  • Integrated back-to-back FETs with low on-resistance: RON = 28.3 mΩ (typ.)
  • Ideal diode operation with true reverse current blocking
  • Fast overvoltage protection
    • Overvoltage clamp (OVC) with pin-selectable threshold (3.8 V, 5.7 V, 13.8 V) and 5-µs (typ.) response time OR
    • Adjustable overvoltage lockout (OVLO) with 1.2-µs (typ.) response time
  • Overcurrent protection with load current monitor output (ILM)
    • Active current limit OR circuit-breaker options
    • Adjustable threshold (ILIM) 0.5 A–6 A
      • ±10% accuracy for ILIM > 1 A
    • Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM
    • Output load current monitor accuracy: ±6% (IOUT ≥ 1 A)
  • Fast-trip response for short-circuit protection
    • 500-ns (typ.) response time
    • Adjustable (2 × ILIM) and fixed thresholds
  • Active high enable input with adjustable undervoltage lockout threshold (UVLO)
  • Adjustable output slew rate control (dVdt)
  • Overtemperature protection
  • Digital outputs
    • Priority power MUX control (AUXOFF) and fault indication (FLT) or
    • Power Good indication (PG) with adjustable threshold (PGTH)
  • UL 2367 recognition
    • File No. E339631
    • RILM ≥ 750 Ω
  • IEC 62368-1 CB certified
  • Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch
  • Wide operating input voltage range: 2.7 V to 23 V
    • 28-V absolute maximum
    • Withstands negative voltages up to –15 V
  • Integrated back-to-back FETs with low on-resistance: RON = 28.3 mΩ (typ.)
  • Ideal diode operation with true reverse current blocking
  • Fast overvoltage protection
    • Overvoltage clamp (OVC) with pin-selectable threshold (3.8 V, 5.7 V, 13.8 V) and 5-µs (typ.) response time OR
    • Adjustable overvoltage lockout (OVLO) with 1.2-µs (typ.) response time
  • Overcurrent protection with load current monitor output (ILM)
    • Active current limit OR circuit-breaker options
    • Adjustable threshold (ILIM) 0.5 A–6 A
      • ±10% accuracy for ILIM > 1 A
    • Adjustable transient blanking timer (ITIMER) to allow peak currents up to 2 × ILIM
    • Output load current monitor accuracy: ±6% (IOUT ≥ 1 A)
  • Fast-trip response for short-circuit protection
    • 500-ns (typ.) response time
    • Adjustable (2 × ILIM) and fixed thresholds
  • Active high enable input with adjustable undervoltage lockout threshold (UVLO)
  • Adjustable output slew rate control (dVdt)
  • Overtemperature protection
  • Digital outputs
    • Priority power MUX control (AUXOFF) and fault indication (FLT) or
    • Power Good indication (PG) with adjustable threshold (PGTH)
  • UL 2367 recognition
    • File No. E339631
    • RILM ≥ 750 Ω
  • IEC 62368-1 CB certified
  • Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch

The TPS25947xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the devices well suited for power MUX/ORing applications as well as systems which need load side energy hold up storage in case input power supply fails. The devices use linear ORing based scheme to ensure almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation.

Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor.

The devices are available in a 2-mm × 2-mm, 10-pin HotRod QFN package for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.

The TPS25947xx family of eFuses is a highly integrated circuit protection and power management solution in a small package. The devices provide multiple protection modes using very few external components and are a robust defense against overloads, short-circuits, voltage surges, reverse polarity and excessive inrush current. With integrated back-to-back FETs, reverse current flow from output to input is blocked at all times, making the devices well suited for power MUX/ORing applications as well as systems which need load side energy hold up storage in case input power supply fails. The devices use linear ORing based scheme to ensure almost zero DC reverse current and emulate ideal diode behavior with minimum forward voltage drop and power dissipation.

Output slew rate and inrush current can be adjusted using a single external capacitor. Loads are protected from input overvoltage conditions either by clamping the output to a safe fixed maximum voltage (pin selectable), or by cutting off the output if input exceeds an adjustable overvoltage threshold. The devices respond to output overload by actively limiting the current or breaking the circuit. The output current limit threshold as well as the transient overcurrent blanking timer are user adjustable. The current limit control pin also functions as an analog load current monitor.

The devices are available in a 2-mm × 2-mm, 10-pin HotRod QFN package for improved thermal performance and reduced system footprint.

The devices are characterized for operation over a junction temperature range of –40°C to +125°C.
filter 尋找其它 eFuse（整合式熱插拔）
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TPS25946 現行 具雙向電流支援的 2.7-V 至 23-V、5.5-A、28-mΩ eFuse 2.7-V to 23-V, 5.5A eFuse with bi-directional current support
功能相同，但引腳輸出與所比較的裝置不同
TPS25948 現行 具有雙向電力傳輸限制的 3.5-V 至 23-V、12.2-mΩ、8-A eFuse Higher current and lower RON
功能與所比較的裝置相似
TPS2521 現行 具有整合式反向極性保護的 2.7-V 至 5.7-V、31-mΩ、4-A eFuse Footprint compatible at reduced voltage and current range.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10
類型 標題 日期
* Data sheet TPS25947xx, 2.7-V–23-V, 5.5-A, 28-mΩ True Reverse Current Blocking eFuse with Input Reverse Polarity Protection datasheet (Rev. B) PDF | HTML 2022年 3月 25日
Application note How eFuse Ensures Integrated FET Operation in Safe Operating Area PDF | HTML 2022年 9月 7日
Application brief Using an eFuse to Meet IEC62368-3 for USB 2.0 and USB 3.1 Power Sourcing Ports PDF | HTML 2022年 2月 7日
Certificate TPS25947x UL2367 Certificate of Compliance E169910 2022年 1月 19日
Certificate TPS25947x UL2367 Certificate of Compliance E339631 2022年 1月 18日
Certificate TPS25947x CB Test Certificate IEC 62368-1 2021年 12月 8日
Application note Basics of Power MUX (Rev. A) PDF | HTML 2020年 10月 20日
Application brief Fast Role Swap, Linear ORing with TPS25947 and LM73100 in USB-Type C Systems (Rev. A) PDF | HTML 2020年 10月 7日
EVM User's guide TPS25947EVM: Evaluation Module for TPS25947 eFuse 2020年 9月 30日
Application brief eFuses in Smart Electricity Meters PDF | HTML 2020年 9月 1日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS25947EVM — TPS25947 eFuse 評估模組

TPS25947EVM eFuse 評估板允許對 TPS25947 eFuse 產品進行參考電路評估。TPS25947xx 裝置是一款 2.7-V 至 23-V、5.5-A eFuse，具有整合 28 mΩ FET 和反向電流防護、輸入反極性防護、過電流、突波電流防護、可調式過電流瞬態消隱定時器、可編程欠電壓與過電壓防護。
使用指南: PDF
TI.com 無法提供
模擬型號

TPS25947x PSpice Transient Model (Rev. A)

SLVMDJ6A.ZIP (131 KB) - PSpice Model
下載
計算工具

SLVRBH5 — TPS25947 Design Calculator

支援產品和硬體

支援產品和硬體

產品
eFuse（整合式熱插拔）
TPS25947 — 具有整合式反向極性保護的 2.7V 至 23V、28mΩ、5.5A eFuse
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
參考設計

TIDA-010239 — AC Level 2 充電器平台參考設計

Electric vehicle supply equipment (EVSE) facilitates power delivery to electric vehicles safely from the grid. An EVSE control system consists of an auxiliary power stage, an off-board AC/DC high-power stage (only in DC charging stations), energy metering unit, AC and DC residual current detector, (...)
Design guide: PDF
參考設計

TIDA-01606 — 11-kW、雙向三相三級 (T 型) 逆變器和 PFC 參考設計

此參考設計概述了雙向三階、三相、SiC 式主動前端 (AFE) 逆變器和功率因數校正 (PFC) 階段的實作方式。此設計使用高達 90kHz 的切換頻率和 LCL 輸出濾波器來縮小磁性元件尺寸。達成了 98.6% 的峰值效率。此設計展示如何在 DQ 領域中實作完整的三相 AFE 控制。此雙向轉換器可實現 DC 快速充電及車輛至電網 (V2G) 應用。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010231 — 適合光電應用、適用於電弧偵測的類比前端參考設計

此參考設計在光伏系統中實作四通道類比前端進行 DC 電弧偵測，支援高達 tp 1000 V 的 DC 電壓及高達 10 A 的電流。透過分析太陽能面板和逆變器間 DC 電流的 AC 雜訊，即可偵測電弧。在使用 C2000 即時微控制器 (MCU) 完成頻率分析前，訊號會由條件為類比濾波器階段的電流變壓器擷取，並由 16 位元 ADC ADC8363 取樣。此設計相容於不同 C2000 controlCARD，可將 MCU 調整至系統。可以使用 ADS8363 的旁路選項來評估 C2000™MCU 的內部 ADC。C2000 軟體套件可在最新 (...)
Design guide: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RPW) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片