首頁 數據轉換器 類比轉數位轉換器 (ADC) 高速 ADC (≥10 MSPS)
首頁
數據轉換器
類比轉數位轉換器 (ADC)
高速 ADC (≥10 MSPS)

ADC12DJ4000RF

現行

具有 4-GSPS 雙通道或 8-GSPS 單通道的射頻取樣 12 位元 ADC

立即訂購
產品規格表

ADC12DJ4000RF

現行
產品規格表 立即訂購

產品詳細資料

Sample rate (max) (Msps) 4000, 8000 Resolution (Bits) 12 Number of input channels 1, 2 Interface type JESD204B, JESD204C Analog input BW (MHz) 8000 Features Ultra High Speed Rating Catalog Peak-to-peak input voltage range (V) 0.8 Power consumption (typ) (mW) 3650 Architecture Folding Interpolating SNR (dB) 57 ENOB (Bits) 9 SFDR (dB) 66 Operating temperature range (°C) -40 to 85 Input buffer Yes
Sample rate (max) (Msps) 4000, 8000 Resolution (Bits) 12 Number of input channels 1, 2 Interface type JESD204B, JESD204C Analog input BW (MHz) 8000 Features Ultra High Speed Rating Catalog Peak-to-peak input voltage range (V) 0.8 Power consumption (typ) (mW) 3650 Architecture Folding Interpolating SNR (dB) 57 ENOB (Bits) 9 SFDR (dB) 66 Operating temperature range (°C) -40 to 85 Input buffer Yes
FCCSP (AAV) 144 100 mm² 10 x 10 FCCSP (ZEG) 144 100 mm² 10 x 10
  • ADC core:
    • 12-bit resolution
    • Up to 8GSPS in single-channel mode
    • Up to 4GSPS in dual-channel mode
  • Performance specifications:
    • Noise floor (–20dBFS, VFS = 1VPP-DIFF):
      • Dual-channel mode: –152.3dBFS/Hz
      • Single-channel mode: –155dBFS/Hz
    • ENOB (dual channel, FIN = 2.4GHz): 8.8 Bits
  • Buffered analog inputs with VCMI of 0 V:
    • Analog input bandwidth (–3dB): 8GHz
    • Usable input frequency range: > 10GHz
    • Full-scale input voltage (VFS, default): 0.8VPP
  • Noiseless aperture delay (tAD) adjustment:
    • Precise sampling control: 19fs Step
    • Simplifies synchronization and interleaving
    • Temperature and voltage invariant delays
  • Easy-to-use synchronization features:
    • Automatic SYSREF timing calibration
    • Timestamp for sample marking
  • JESD204C serial data interface:
    • Maximum lane rate: 17.16Gbps
    • Support for 64b/66b and 8b/10b encoding
    • 8b/10b modes are JESD204B compatible
  • Optional digital down-converters (DDC):
    • 4x, 8x, 16x and 32x complex decimation
    • Four independent 32-Bit NCOs per DDC
  • Peak RF Input Power (Diff): +26.5dBm (+ 27.5dBFS, 560x fullscale power)
  • Programmable FIR filter for equalization
  • Power consumption: 3.7W
  • Power supplies: 1.1V, 1.9V
  • ADC core:
    • 12-bit resolution
    • Up to 8GSPS in single-channel mode
    • Up to 4GSPS in dual-channel mode
  • Performance specifications:
    • Noise floor (–20dBFS, VFS = 1VPP-DIFF):
      • Dual-channel mode: –152.3dBFS/Hz
      • Single-channel mode: –155dBFS/Hz
    • ENOB (dual channel, FIN = 2.4GHz): 8.8 Bits
  • Buffered analog inputs with VCMI of 0 V:
    • Analog input bandwidth (–3dB): 8GHz
    • Usable input frequency range: > 10GHz
    • Full-scale input voltage (VFS, default): 0.8VPP
  • Noiseless aperture delay (tAD) adjustment:
    • Precise sampling control: 19fs Step
    • Simplifies synchronization and interleaving
    • Temperature and voltage invariant delays
  • Easy-to-use synchronization features:
    • Automatic SYSREF timing calibration
    • Timestamp for sample marking
  • JESD204C serial data interface:
    • Maximum lane rate: 17.16Gbps
    • Support for 64b/66b and 8b/10b encoding
    • 8b/10b modes are JESD204B compatible
  • Optional digital down-converters (DDC):
    • 4x, 8x, 16x and 32x complex decimation
    • Four independent 32-Bit NCOs per DDC
  • Peak RF Input Power (Diff): +26.5dBm (+ 27.5dBFS, 560x fullscale power)
  • Programmable FIR filter for equalization
  • Power consumption: 3.7W
  • Power supplies: 1.1V, 1.9V

The ADC12DJ4000RF device is an RF-sampling, giga-sample, analog-to-digital converter (ADC) that can directly sample input frequencies from DC to above 10 GHz. ADC12DJ4000RF can be configured as a dual-channel, 4 GSPS ADC or single-channel, 8 GSPS ADC. Support of a useable input frequency range of up to 10GHz enables direct RF sampling of L-band, S-band, C-band, and X-band for frequency agile systems.

The ADC12DJ4000RF uses a high-speed JESD204C output interface with up to 16 serialized lanes supporting up to 17.16Gbps line rate. Deterministic latency and multi-device synchronization is supported through JESD204C subclass-1. The JESD204C interface can be configured to trade-off line rate and number of lanes. Both 8b/10b and 64b/66b data encoding schemes are supported. 64b/66b encoding supports forward error correction (FEC) for improved bit error rates. The interface is backwards compatible with JESD204B receivers.

Innovative synchronization features, including noiseless aperture delay adjustment and SYSREF windowing, simplify system design for multi-channel applications. Optional digital down converters (DDCs) are available to provide digital conversion to baseband and to reduce the interface rate. A programmable FIR filter allows on-chip equalization.

The ADC12DJ4000RF device is an RF-sampling, giga-sample, analog-to-digital converter (ADC) that can directly sample input frequencies from DC to above 10 GHz. ADC12DJ4000RF can be configured as a dual-channel, 4 GSPS ADC or single-channel, 8 GSPS ADC. Support of a useable input frequency range of up to 10GHz enables direct RF sampling of L-band, S-band, C-band, and X-band for frequency agile systems.

The ADC12DJ4000RF uses a high-speed JESD204C output interface with up to 16 serialized lanes supporting up to 17.16Gbps line rate. Deterministic latency and multi-device synchronization is supported through JESD204C subclass-1. The JESD204C interface can be configured to trade-off line rate and number of lanes. Both 8b/10b and 64b/66b data encoding schemes are supported. 64b/66b encoding supports forward error correction (FEC) for improved bit error rates. The interface is backwards compatible with JESD204B receivers.

Innovative synchronization features, including noiseless aperture delay adjustment and SYSREF windowing, simplify system design for multi-channel applications. Optional digital down converters (DDCs) are available to provide digital conversion to baseband and to reduce the interface rate. A programmable FIR filter allows on-chip equalization.
filter 尋找其它 高速 ADC (≥10 MSPS)
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
ADC08DJ5200RF 現行 具雙通道 5.2 GSPS 或單通道 10.4 GSPS 的 RF 取樣 8 位元 ADC ADC08DJ5200RF offers higher speed, lower resolution, and no DDC.

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 日期
* Data sheet ADC12DJ4000RF 8GSPS Single-Channel or 4GSPS Dual-Channel, 12-bit, RF-Sampling Analog-to-Digital Converter (ADC) datasheet (Rev. D) PDF | HTML 2025年 4月 8日
Application note Comparing Active vs. Passive High-Speed/RF A/D Converter Front Ends PDF | HTML 2025年 3月 28日
Application note Evaluating High-Speed, RF ADC Converter Front-end Architectures PDF | HTML 2025年 3月 26日
Technical article So, what are S-parameters anyway? PDF | HTML 2019年 5月 23日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADC12DJ4000RFEVM — 適用於 4GSPS 雙通道或 8GSPS 單通道、射頻取樣、12 位元 ADC 的 ADC12DJ4000RF 評估模組

ADC12DJ4000RF 評估模組 (EVM) 專為評估 ADC12DJ4000RF 高速類比轉數位轉換器 (ADC) 所設計。本 EVM 搭載 ADC12DJ4000RF 晶片，該晶片為具備 JESD204B 介面的 12 位元、雙通道 4GSPS 或單通道 8GSPS ADC。
使用指南: PDF | HTML
TI.com 無法提供
開發板

TRF1208-ADC12DJ5200RFEVM — 適用具 ADC12DJ5200RF 的高速射頻取樣全差動放大器的 TRF1208 評估模組

TRF1208-ADC12DJ5200RF 評估模組 (EVM) 專為評估 ADC12DJ5200RF 系列高速類比轉數位轉換器 (ADC) 所設計。本 EVM 搭載 ADC12DJ5200RF 晶片，該晶片為具備 JESD204B 介面的 12 位元、雙通道 5.2GSPS 或單通道 10.4GSPS ADC，可評估該系列所有解析度與取樣率的裝置。
使用指南: PDF | HTML
TI.com 無法提供
韌體

TI204C-IP — Request for JESD204 rapid design IP

The JESD204 rapid design IP has been designed to enable FPGA engineers to achieve an accelerated path to a working JESD204 system. The IP has been architected in a way that downstream digital processing and other application logic are isolated from most of the performance- and timing-critical (...)

支援產品和硬體

支援產品和硬體
要求
計算工具

ADC12DJ5200RF-CALC — ADC12DJ5200RF input network full-scale calculation tool.

Calculation tool referenced in application note SLVAFZ7.
支援產品和硬體

支援產品和硬體
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
FCCSP (AAV) 144 Ultra Librarian
FCCSP (ZEG) 144 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片