主页 电源管理 交流/直流开关稳压器 交流/直流转换器

UCC28910

正在供货

具有恒压恒流和初级侧控制功能的 700V 反激式开关

产品详情

Rating Catalog Topology Buck, Flyback Iout (max) (A) 0.6 Vin (max) (V) 450 Vin (min) (V) 20 Vout (max) (V) 24 Vout (min) (V) 3.3 Features Current limiting, Green mode, High voltage startup, High-voltage startup, Input line monitor, Integrated Switch, Leading edge blanking, Light load efficiency, Light-load efficiency, Low power, Overcurrent protection, Soft start Control mode Current, Primary-side regulation, Voltage Switching frequency (min) (kHz) 0.42 Switching frequency (max) (kHz) 115 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 23500 Duty cycle (max) (%) 99
Rating Catalog Topology Buck, Flyback Iout (max) (A) 0.6 Vin (max) (V) 450 Vin (min) (V) 20 Vout (max) (V) 24 Vout (min) (V) 3.3 Features Current limiting, Green mode, High voltage startup, High-voltage startup, Input line monitor, Integrated Switch, Leading edge blanking, Light load efficiency, Light-load efficiency, Low power, Overcurrent protection, Soft start Control mode Current, Primary-side regulation, Voltage Switching frequency (min) (kHz) 0.42 Switching frequency (max) (kHz) 115 Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 23500 Duty cycle (max) (%) 99
SOIC (D) 7 29.4 mm² (4.9 mm × 6 mm)
  • Constant-Voltage (CV) and Constant-Current (CC) Output Regulation Without Optical-Coupler
  • ±5% Output Voltage Regulation Accuracy
  • ±5% Output Current Regulation With AC Line and Primary Inductance Tolerance Compensation
  • 700-V Start-Up and Smart Power Management Enables <30-mW Standby Power
  • 115-kHz Maximum Switching Frequency Design for High-Power Density
  • Valley Switching and Frequency Dithering to Ease EMI Compliance
  • Thermal Shut Down
  • Low Line and Output Over-Voltage Protection
  • Constant-Voltage (CV) and Constant-Current (CC) Output Regulation Without Optical-Coupler
  • ±5% Output Voltage Regulation Accuracy
  • ±5% Output Current Regulation With AC Line and Primary Inductance Tolerance Compensation
  • 700-V Start-Up and Smart Power Management Enables <30-mW Standby Power
  • 115-kHz Maximum Switching Frequency Design for High-Power Density
  • Valley Switching and Frequency Dithering to Ease EMI Compliance
  • Thermal Shut Down
  • Low Line and Output Over-Voltage Protection

The UCC28910 and UCC28911 are high-voltage flyback switchers that provide output voltage and current regulation without the use of an optical coupler. Both devices incorporate a 700-V power FET and a controller that process operating information from the flyback auxiliary winding and power FET to provide a precise output voltage and current control. The integrated high-voltage current source for startup that is switched off during device operation, and the controller current consumption is dynamically adjusted with load. Both enable the very low stand-by power consumption.

Control algorithms in the UCC28910 and UCC28911, combining switching frequency and peak primary current modulation, allow operating efficiencies to meet or exceed applicable standards. Discontinuous conduction mode (DCM) with valley switching is used to reduce switching losses. Built-in protection features help to keep secondary and primary component stress levels in check across the operating range. The frequency jitter helps to reduce EMI filter

The UCC28910 and UCC28911 are high-voltage flyback switchers that provide output voltage and current regulation without the use of an optical coupler. Both devices incorporate a 700-V power FET and a controller that process operating information from the flyback auxiliary winding and power FET to provide a precise output voltage and current control. The integrated high-voltage current source for startup that is switched off during device operation, and the controller current consumption is dynamically adjusted with load. Both enable the very low stand-by power consumption.

Control algorithms in the UCC28910 and UCC28911, combining switching frequency and peak primary current modulation, allow operating efficiencies to meet or exceed applicable standards. Discontinuous conduction mode (DCM) with valley switching is used to reduce switching losses. Built-in protection features help to keep secondary and primary component stress levels in check across the operating range. The frequency jitter helps to reduce EMI filter

下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同。
UCG28826 正在供货 具有集成式 GaN (65W) 的自偏置高频 QR 反激式转换器 Higher output power capability with integrated GaN FET

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

UCC28910FBEVM-526 — UCC28910FBEVM-526 评估模块

具有初级侧控制的通用输入 5V、6W 隔离型反激式电源

用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
评估板

UCC28911EVM-718 — UCC28911 评估模块

UCC28911EVM-718 评估模块是一种离线反激式电源,无需使用光耦合器和次级侧反馈组件即可提供隔离式输出电压和电流调节。输入接受的电压范围为 85VAC 至 265VAC,47Hz 至 64Hz。该评估模块使用 UCC28911 CV/CC PWM HV 开关。这个器件集成了一个 700V 功率 MOSFET 和一个控制器,可处理辅助反激式绕组以及功率 MOSFET 的运行信息,从而提供精准的输出电压和电流控制。UCC28911 中的控制算法使得运行效率满足或者超过适用标准。低系统器件数和内置的高级保护功能可提供具有成本效益的解决方案,满足全球严格的能效要求。

用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
计算工具

SLUC503 — UCC28910 Design Calculator

支持的产品和硬件

许多 TI 参考设计都包括 UCC28910

通过我们的参考设计选择工具来审查并确定最适用于您应用和参数的设计。

封装 引脚 CAD 符号、封装和 3D 模型
SOIC (D) 7 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频