主页 电源管理 交流/直流开关稳压器 交流/直流控制器

UCC28702

正在供货

具有 PSR、NTC 选项和 150mV 电缆补偿功能的恒压、恒流 PWM

产品详情

Topology Buck, Flyback Control mode Primary-side regulation Features CC/CV output regulation, Cable compensation, DCM, Leading edge blanking, NTC resistor interface, Overcurrent protection, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching Duty cycle (max) (%) 99
Topology Buck, Flyback Control mode Primary-side regulation Features CC/CV output regulation, Cable compensation, DCM, Leading edge blanking, NTC resistor interface, Overcurrent protection, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching Duty cycle (max) (%) 99
SOT-23 (DBV) 6 8.12 mm² (2.9 mm × 2.8 mm)
  • < 30-mW No-Load Power for 5-Star Rating
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency Enables High-Power
    Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for Highest
    Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI
    Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and
    Overcurrent
  • Programmable Cable Compensation (UCC28700 Only)
  • NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
    Only) With Fixed Cable Compensation Options
  • SOT-23 Package
  • < 30-mW No-Load Power for 5-Star Rating
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency Enables High-Power
    Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for Highest
    Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI
    Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and
    Overcurrent
  • Programmable Cable Compensation (UCC28700 Only)
  • NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
    Only) With Fixed Cable Compensation Options
  • SOT-23 Package

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同且具有相同引脚。
UCC28704 正在供货 具有初级侧调节 (PSR) 功能的高效离线 CV 和 CC 反激控制器 This product is a newer PSR flyback controller with better performance and meets the latest energy efficiency standards. It is suggested for new designs.

技术文档

未找到结果。请清除搜索并重试。
查看全部 10
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 UCC2870x Constant-Voltage, Constant-Current Controller With Primary-Side Regulation 数据表 (Rev. A) PDF | HTML 2014-12-12
应用手册 Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips PDF | HTML 2021-8-31
应用手册 Minimize Standby Consumption for UCC287XX Family 2019-8-1
选择指南 电源管理指南 2018 2018-7-31
应用手册 Selecting Electrolitic Bus Capacitor for Universal Input 2018-7-17
应用手册 Troubleshooting TI PSR controllers 2016-10-3
白皮书 Control Challenges for Low Power AC/DC Converters 2015-10-2
白皮书 Control Challenges for Low Power AC/DC Converters (PPT) 2015-10-2
应用手册 UCC28700 5-W USB Flyback Design Review (Rev. C) 2014-2-21
更多文献资料 Exposing the Inner Behavior of a Quasi-Resonant Flyback Converter 2013-10-29

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

UCC28700EVM-068 — UCC28700 评估模块

德州仪器 (TI) UCC28700EVM-068 评估模块 (EVM) 可帮助设计人员评估 UCC28700 恒压恒流 PWM(带初级侧调节功能)的性能。5W EVM 用于评估 USB 应用的离线适配器。 该转换器将 90V 至 265V RMS 输入电压降压至 5V 直流,并为 USB 适配器应用设置 1A 电流限制。它的用途是进行评估,而非作为最终产品。
用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
仿真模型

UCC2870x PSPICE Transient Model

SLUM455.ZIP (131 KB) - PSpice 模型
支持的产品和硬件
仿真模型

UCC2870x TINA-TI Transient Reference Design

SLUM619.TSC (195 KB) - TINA-TI 参考设计
支持的产品和硬件
仿真模型

UCC2870x TINA-TI Transient Spice Model

SLUM617.ZIP (101 KB) - TINA-TI Spice 模型
支持的产品和硬件
计算工具

SLUC381 — MathCAD Design Tool

支持的产品和硬件
计算工具

SLUC408 — UCC28700 Excel 97 Design Tool

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
SOT-23 (DBV) 6 Ultra Librarian

订购和质量

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频