主页 电源管理 交流/直流开关稳压器 交流/直流控制器

UCC28700

正在供货

具有 PSR 和可编程电缆补偿功能的恒压、恒流 PWM

产品详情

Topology Buck, Flyback Control mode Primary-side regulation Features CC/CV output regulation, Cable compensation, Current limiting, DCM, Leading edge blanking, Low power, Overcurrent protection, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching Duty cycle (max) (%) 99 Sector Test & measurement
Topology Buck, Flyback Control mode Primary-side regulation Features CC/CV output regulation, Cable compensation, Current limiting, DCM, Leading edge blanking, Low power, Overcurrent protection, Primary-side regulated, Quasi-Resonant, Soft start, Valley switching Duty cycle (max) (%) 99 Sector Test & measurement
SOT-23 (DBV) 6 8.12 mm² (2.9 mm × 2.8 mm)
  • < 30-mW No-Load Power for 5-Star Rating
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency Enables High-Power
    Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for Highest
    Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI
    Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and
    Overcurrent
  • Programmable Cable Compensation (UCC28700 Only)
  • NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
    Only) With Fixed Cable Compensation Options
  • SOT-23 Package
  • < 30-mW No-Load Power for 5-Star Rating
  • Primary-Side Regulation (PSR) Eliminates Opto-Coupler
  • ±5% Voltage and Current Regulation
  • 130-kHz Maximum Switching Frequency Enables High-Power
    Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for Highest
    Overall Efficiency
  • Patent-Pending Frequency-Jitter Scheme to Ease EMI
    Compliance
  • Wide VDD Range Allows Small Bias Capacitor
  • Clamped Gate-Drive Output for MOSFET
  • Protection Functions: Overvoltage, Low-Line, and
    Overcurrent
  • Programmable Cable Compensation (UCC28700 Only)
  • NTC Resistor Interface (UCC28701, UCC28702 and UCC28703
    Only) With Fixed Cable Compensation Options
  • SOT-23 Package

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

The UCC28700 family of flyback power supply controllers provides Constant-Voltage (CV) and Constant-Current (CC) output regulation without the use of an optical coupler. The devices process information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current. Low start-up current, dynamically controlled operating states and a tailored modulation profile support very low standby power without sacrificing start-up time or output transient response.

Control algorithms in the UCC28700 family allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a MOSFET power switch. Discontinuous Conduction Mode (DCM) with valley switching reduces switching losses. Modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controllers have a maximum switching frequency of 130 kHz and always maintain control of the peak-primary current in the transformer. Protection features help keep primary and secondary component stresses in check. The UCC28700 allows the level of cable compensation to be programmed. The UCC28701, UCC28702, and UCC28703 devices allow remote temperature sensing using a Negative Temperature Coefficient (NTC) resistor while providing fixed cable-compensation levels.

下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能优于比较器件,可直接替换。
UCC28700-Q1 正在供货 汽车级、紧凑型初级测调节 PWM 控制器 Automotive qualified version

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

UCC28700EVM-068 — UCC28700 评估模块

德州仪器 (TI) UCC28700EVM-068 评估模块 (EVM) 可帮助设计人员评估 UCC28700 恒压恒流 PWM(带初级侧调节功能)的性能。5W EVM 用于评估 USB 应用的离线适配器。 该转换器将 90V 至 265V RMS 输入电压降压至 5V 直流,并为 USB 适配器应用设置 1A 电流限制。它的用途是进行评估,而非作为最终产品。
用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
评估板

UCC28711EVM-160 — UCC28711 评估模块

德州仪器 (TI) UCC28711EVM-160 评估模块 (EVM) 可帮助设计人员评估 UCC28711 恒压恒流 PWM(带一次侧调节功能)的性能。5W EVM 用于评估适用于 USB 应用中的离线适配器。该转换器将 90V 至 265V 的有效值输入电压降压至 5V 直流电,并为 USB 适配器应用设置 1A 电流限制。它的用途是进行评估,而非作为最终产品。
用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
评估板

UCC28720EVM-212 — 用于 USB 离线适配器的 UCC28720EVM-212 5W 评估模块

UCC28720EVM-212 是一个 5W 评估模块,用于评估 USB 应用的离线适配器。它的用途是进行评估,而非作为最终产品。UCC28720EVM-212 将 100V 至 240V RMS 输入电压转换为 5VDC,具有 1A 的电流限制,适用于 USB 适配器应用。
用户指南: PDF
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
仿真模型

UCC2870x PSPICE Transient Model

SLUM455.ZIP (131 KB) - PSpice 模型
支持的产品和硬件
仿真模型

UCC2870x TINA-TI Transient Reference Design

SLUM619.TSC (195 KB) - TINA-TI 参考设计
支持的产品和硬件
仿真模型

UCC2870x TINA-TI Transient Spice Model

SLUM617.ZIP (101 KB) - TINA-TI Spice 模型
支持的产品和硬件
计算工具

SLUC381 — MathCAD Design Tool

支持的产品和硬件
计算工具

SLUC408 — UCC28700 Excel 97 Design Tool

支持的产品和硬件

许多 TI 参考设计都包括 UCC28700

通过我们的参考设计选择工具来审查并确定最适用于您应用和参数的设计。

封装 引脚 CAD 符号、封装和 3D 模型
SOT-23 (DBV) 6 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频