TPS79301-EP
- Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
- Enhanced Diminishing Manufacturing Sources (DMS) Support
- Enhanced Product-Change Notification
- Qualification Pedigree(1)
- 200-mA Low-Dropout Regulator With EN
- Available in 1.8 V, 2.5 V, 2.8 V, 2.85 V, 3 V, 3.3 V, 4.75 V, and Adjustable
- High PSRR (70 dB at 10 kHz)
- Ultralow Noise (32 µV)
- Fast Start-Up Time (50 µs)
- Stable With a 2.2-µF Ceramic Capacitor
- Excellent Load/Line Transient
- Very Low Dropout Voltage (112 mV at Full Load, TPS79330)
- 5-Pin SOT23 (DBV) Package
- APPLICATIONS
- VCOs
- RF
- Bluetooth™, Wireless LAN
(1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over specified temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
Bluetooth is a trademark of Bluetooth SIG, Inc.
The TPS793xx family of low-dropout (LDO) low-power linear voltage regulators features high power-supply rejection ratio (PSRR), ultralow noise, fast start-up, and excellent line and load transient responses in a small-outline SOT23 package. Each device in the family is stable, with a small 2.2-µF ceramic capacitor on the output. The TPS793xx family uses an advanced, proprietary, BiCMOS fabrication process to yield extremely low dropout voltages (e.g., 112 mV at 200 mA, TPS79330). Each device achieves fast start-up times (approximately 50 µs with a 0.001-µF bypass capacitor), while consuming very low quiescent current (170 µA typical). Moreover, when the device is placed in standby mode, the supply current is reduced to less than 1 µA. The TPS79328 exhibits approximately 32 µVRMS of output voltage noise with a 0.1-µF bypass capacitor. Applications with analog components that are noise sensitive, such as portable RF electronics, benefit from the high PSRR and low-noise features, as well as the fast response time.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | TPS79301-EP, '79318-EP, '79325-EP,'79328-EP, '793285-EP, '79330-EP, TPS79333-EP, 数据表 (Rev. B) | 2006-11-7 | |||
| * | 辐射与可靠性报告 | TPS79301DBVREP Reliability Report | 2016-5-4 | |||
| * | 辐射与可靠性报告 | TPS79301MDBVREP Reliability Report | 2016-5-4 | |||
| * | VID | TPS79301-EP VID V6203634 | 2016-6-21 | |||
| * | VID | TPS79301-EP VID V6203634 | 2016-6-21 | |||
| * | VID | TPS79301-EP VID V6203634 | 2016-6-21 | |||
| * | VID | TPS79301-EP VID V6203634 | 2016-6-21 | |||
| 应用手册 | LDO 噪声揭秘 (Rev. B) | PDF | HTML | 英语版 (Rev.B) | PDF | HTML | 2020-9-16 | |
| 应用手册 | LDO PSRR Measurement Simplified (Rev. A) | PDF | HTML | 2017-8-9 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
TIDA-00431 — 采用 8GHz 直流耦合差分放大器的射频采样 4GSPS ADC 参考设计
宽带射频 (RF) 接收器有助于极大提高无线电设计的灵活性。较宽的瞬时带宽支持在不更改硬件的情况下实现灵活调优，并且能够以间隔较大的频率捕获多个通道。
该参考设计介绍了一款宽带射频接收器，该接收器采用 4GSPS 模数转换器 (ADC) 并具有一个 8GHz 直流耦合全差分放大器前端。放大器前端提供信号增益，并且能够捕获下行到直流的信号，而平衡-非平衡变压器耦合输入则无法做到这一点。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。