主页 电源管理 直流/直流开关稳压器 DC/DC converters

TPS54A24

正在供货

4.5V 至 17V、10A 同步 SWIFT™ 降压转换器

产品详情

Rating Catalog Topology Buck Iout (max) (A) 10 Vin (max) (V) 17 Vin (min) (V) 4.5 Vout (max) (V) 12 Vout (min) (V) 0.6 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking EMI features Low parasitic Hotrod packaging Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00058 Duty cycle (max) (%) 98 Sector Test & measurement
Rating Catalog Topology Buck Iout (max) (A) 10 Vin (max) (V) 17 Vin (min) (V) 4.5 Vout (max) (V) 12 Vout (min) (V) 0.6 Features Enable, Frequency synchronization, Power good, Pre-Bias Start-Up, Synchronous Rectification, Tracking EMI features Low parasitic Hotrod packaging Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.00058 Duty cycle (max) (%) 98 Sector Test & measurement
WQFN (RTW) 24 16 mm² (4 mm × 4 mm)
  • Standard 4-mm × 4-mm WQFN package
  • –40°C to +150°C Operating junction temperature
  • 200-kHz to 1.6-MHz Fixed switching frequency
  • Peak-current-mode control
  • Synchronizes to external clock
  • 0.6-V Voltage reference ±0.85% over temperature
  • 0.6-V to 12-V Output voltage range
  • Safe start-up into prebiased output voltage
  • Hiccup current limit
  • Adjustable soft start and power sequencing
  • Adjustable input undervoltage lockout
  • Power-good output monitor for undervoltage and overvoltage
  • 3-µA Shutdown current
  • Output overvoltage protection
  • Non-latch thermal shutdown protection
  • Create a custom design using the TPS54A24 with the WEBENCH® Power Designer
  • Standard 4-mm × 4-mm WQFN package
  • –40°C to +150°C Operating junction temperature
  • 200-kHz to 1.6-MHz Fixed switching frequency
  • Peak-current-mode control
  • Synchronizes to external clock
  • 0.6-V Voltage reference ±0.85% over temperature
  • 0.6-V to 12-V Output voltage range
  • Safe start-up into prebiased output voltage
  • Hiccup current limit
  • Adjustable soft start and power sequencing
  • Adjustable input undervoltage lockout
  • Power-good output monitor for undervoltage and overvoltage
  • 3-µA Shutdown current
  • Output overvoltage protection
  • Non-latch thermal shutdown protection
  • Create a custom design using the TPS54A24 with the WEBENCH® Power Designer

The TPS54A24 is a full-featured 17-V, 10-A synchronous step-down DC/DC converter in a standard 4 mm × 4 mm WQFN package.

The device is optimized for small solution size through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through peak-current-mode control, which reduces component count, and by selecting a high switching frequency, reducing the inductor footprint.

The peak-current-mode control simplifies the loop compensation and provides fast transient response. Cycle-by-cycle peak current limiting on the high-side and low-side sourcing current limit protects the device in overload situations. Hiccup limits MOSFET power dissipation if a short circuit or over loading fault persists.

A power-good supervisor circuit monitors the regulator output. The PGOOD pin is an open-drain output and goes high impedance when the output voltage is in regulation. An internal deglitch time prevents the PGOOD pin from pulling low unless a fault has occurred.

A dedicated EN pin can be used to control the regulator on/off and adjust the input undervoltage lockout. The output voltage start-up ramp is controlled by the SS/TRK pin, which allows operation as either a standalone power supply or in tracking situations.

The TPS54A24 is a full-featured 17-V, 10-A synchronous step-down DC/DC converter in a standard 4 mm × 4 mm WQFN package.

The device is optimized for small solution size through high efficiency and integrating the high-side and low-side MOSFETs. Further space savings are achieved through peak-current-mode control, which reduces component count, and by selecting a high switching frequency, reducing the inductor footprint.

The peak-current-mode control simplifies the loop compensation and provides fast transient response. Cycle-by-cycle peak current limiting on the high-side and low-side sourcing current limit protects the device in overload situations. Hiccup limits MOSFET power dissipation if a short circuit or over loading fault persists.

A power-good supervisor circuit monitors the regulator output. The PGOOD pin is an open-drain output and goes high impedance when the output voltage is in regulation. An internal deglitch time prevents the PGOOD pin from pulling low unless a fault has occurred.

A dedicated EN pin can be used to control the regulator on/off and adjust the input undervoltage lockout. The output voltage start-up ramp is controlled by the SS/TRK pin, which allows operation as either a standalone power supply or in tracking situations.

下载 观看带字幕的视频 视频

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估板

TPS54A24EVM-058 — 降压转换器评估模块

TPS54A24EVM-058 评估模块 (EVM) 用于评估 TPS54A24。  TPS54A24 是一款同步降压转换器,集成了两个功率 MOSFET,可更大程度地减小解决方案尺寸并在满载时提供高效率。固定频率峰值电流模式控制可用于更大限度地降低周期和导通时间抖动。强制连续导通模式使开关频率在轻负载时保持不变,并能快速响应轻负载的瞬态变化。
用户指南: PDF | HTML
支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
仿真模型

TPS54A24 Transient PSPICE Model

SLVMD17.ZIP (197 KB) - PSpice 模型
支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
WQFN (RTW) 24 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频