TPA2012D2
- Output Power By Package:
- WQFN:
- 2.1 W/Ch Into 4 Ω at 5 V
- 1.4 W/Ch Into 8 Ω at 5 V
- 720 mW/Ch Into 8 Ω at 3.6 V
- DSBGA:
- 1.2 W/Ch Into 4 Ω at 5 V
(Thermally Limited) - 1.3 W/Ch Into 8 Ω at 5 V
- 720 mW/Ch Into 8 Ω at 3.6 V
- 1.2 W/Ch Into 4 Ω at 5 V
- WQFN:
- Only Two External Components Required
- Power Supply Range: 2.5 V to 5.5 V
- Independent Shutdown Control for Each Channel
- Selectable Gain of 6, 12, 18, and 24 dB
- Internal Pulldown Resistor on Shutdown Pins
- High PSRR: 77 dB at 217 Hz
- Fast Start-Up Time (3.5 ms)
- Low Supply Current
- Low Shutdown Current
- Short-Circuit and Thermal Protection
- Space-Saving Packages
- 2.01-mm × 2.01-mm NanoFree™ DSBGA (YZH)
- 4-mm × 4-mm Thin WQFN (RTJ) With PowerPAD™
The TPA2012D2 is a stereo, filter-free, Class-D audio amplifier (Class-D amp) available in a DSBGA or WQFN package. The TPA2012D2 only requires two external components for operation.
The TPA2012D2 features independent shutdown controls for each channel. The gain can be selected to 6, 12, 18, or 24 dB using the G0 and G1 gain select pins. High PSRR and differential architecture provide increased immunity to noise and RF rectification. In addition to these features, a fast start-up time and small package size make the TPA2012D2 class-D amp an ideal choice for both cellular handsets and PDAs.
The TPA2012D2 is capable of driving 1.4 W/Ch at
5 V or 720 mW/Ch at 3.6 V into 8 Ω. The TPA2012D2 is also capable of driving 4 Ω. The
TPA2012D2 is thermally limited in DSBGA and may not achieve
2.1 W/Ch for 4 Ω. The maximum output power in the DSBGA is determined by the ability of the
circuit board to remove heat. Figure 33 shows thermally limited region of the DSBGA in
relation to the WQFN package. The TPA2012D2 provides thermal and short-circuit protection.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | TPA2012D2 2.1-W/Channel Stereo Filter-Free Class-D Audio Power Amplifier 数据表 (Rev. F) | PDF | HTML | 2017-3-14 | ||
| 应用手册 | Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) | 2019-8-26 | ||||
| 应用手册 | AN-1849 An Audio Amplifier Power Supply Design (Rev. C) | 2019-6-27 | ||||
| 应用手册 | AN-1737 Managing EMI in Class D Audio Applications (Rev. A) | 2013-5-1 | ||||
| 更多文献资料 | TPA2012D2_NanoEVM_ Schematic | 2007-2-13 | ||||
| 更多文献资料 | TPA2012D2_NanoEVM_OV | 2007-1-29 | ||||
| 应用手册 | Measuring Class-D Amplifiers for Audio Speaker Overstress Testing | 2005-10-28 | ||||
| 用户指南 | TPA2012D2EVM - User Guide (Rev. A) | 2005-4-7 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
CC3200AUDBOOST — SimpleLink Wi-Fi CC3200 Audio BoosterPack
SimpleLink™ Wi-Fi® CC3200 Audio BoosterPack 可使用 SimpleLink™ Wi-Fi® CC3200 器件上的数字音频外设 [I2S] 进行评估和开发。它包含用于驱动扬声器的 D 类功率放大器和支持可编程音频处理的超低功耗音频编解码器 TLV320AIC3254。扬声器、耳机和麦克风单独出售。
该 BoosterPack 可与 SimpleLink™ Wi-Fi® CC3200 LaunchPad™ (CC3200-LAUNCHXL)、SimpleLink™ 多标准 CC26x2R 无线 MCU LaunchPad™ 开发套件或 (...)
TPA2012D2EVM — TPA2012D2 评估模块 (EVM)
The TPA2012D2 EVM is a Pb-free, highly-efficient, filter-free stereo audio power amplifier evaluation module. It consists of the TI TPA2012D2 1.65 W low-voltage stereo Class-D audio power amplifier IC in a very small NanoFree™ wafer chip scale package (WCSP). All devices including the (...)
TIDC-CC3200AUDBOOST — 适用于 SimpleLink Wi-Fi CC3200 Launchpad 的 Wi-Fi 音频流应用
该 SimpleLink Wi-Fi CC3200 LaunchPad 和音频 BoosterPack 设计为新应用以及现有应用（例如 HD 数字扬声器）带来 Wi-Fi 音频流功能。它支持从数字麦克风或立体声/单声道音频插孔捕获音频，并将其流式传输至另一台支持 Wi-Fi 的设备，再进行回放。接收到的 Wi-Fi 音频可通过板载立体声音频插孔或端子块传输到立体声或数字扬声器。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| WQFN (RTJ) | 20 | Ultra Librarian |
| DSBGA (YZH) | 16 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。