TAS6684A-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to +125°C, TA
- General operation
- 4.5V to 45V supply voltage, 50V load dump
- Support for 1.8V and 3.3V I/O
- I2C control with 8 address options
- <2-W idle power loss at 14.4V, <8uA max VBAT+PVDD shutdown loss
- Integrated DSP processing
- Class-H supply voltage control
- Thermal monitoring and foldback
- Clip detection, PVDD monitoring and foldback
- Output current sensing by channel via I2S/TDM
- No need for external circuitry
- Real-time load diagnostics
- Monitor output conditions while playing audio
- Real-time temperature monitor for each channel
- Open load, Shorted load detection
- DC and AC Standby load diagnostics
- Audio inputs
- 2-4 channel I2S or 4-16 channel TDM input
- Input sample rates: 44.1, 48, 96, 192kHz
- Low latency < 100us at 96k sample rate
- Audio outputs
- 4-channel bridge-tied load (BTL), configurable 2-channel parallel BTL (PBTL)
- 384kHz to 2MHz configurable output switching frequency
- Up to 13A channel output current
- 400VA peak BTL output power
- 118W (45V, 8Ω, 1% THD, BTL)
- 218W (45V, 4Ω, 1% THD, BTL)
- Audio Performance
- THD+N 0.03% (8Ω, 1W, 1kHz)
- 111dB SNR
- 37µV (14.4V), 80µV (45V) output noise
- Protection
- Output short protection
- DC offset, undervoltage and overvoltage
- Configurable overtemperature warning and individual channel shutdown
- I2C temperature and supply voltage readout
- Easily meet CISPR25-L5 EMC specification
- Advanced spread-spectrum
The TAS6684A-Q1 is a four-channel, digital-input, high-voltage, Class-D audio amplifier that supports up to 45V supply voltage. Combined with up to 13A output current, this device delivers maximum output power and high fidelity audio in high and low impedance loads. The device provides four channels at 118W (45V, 8Ω, 1% THD, BTL) and 218W (45V, 4Ω, 1% THD, BTL).
The TAS6684A-Q1 integrates DC and AC load diagnostics to determine the status of the connected loads before enabling the output stage. During audio playback, the status can be monitored through the output current sense and temperature of each channel which is available for each channel, and reports the measurement to a host processor through TDM with minimal delay. The device monitors the output load condition while playing audio using real-time load diagnostics which operate independently from the host and audio input.
To optimize system efficiency, the integrated DSP of the TAS6684A-Q1 enables Class-H envelope tracking control, eliminating the need for the development of complex tracking software and making local boost voltage control possible without the need for an external microcontroller.
The TAS6684A-Q1 device features an additional low-latency signal path for each channel, providing up to 70% faster signal processing at 48kHz and support an audio signal path latency of < 100us at 96kHz sample rate, which enables time-sensitive Active Noise Cancellation (ANC), Road Noise Cancellation (RNC) applications.
The TAS6684A-Q1 is offered in a 64-pin QFP package with the exposed thermal pad up, TAS6684A-Q1is pin-to-pin compatible with TAS6684-Q1.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | TAS6684A-Q1 45V, 13A Digital Input 4-Channel Automotive Class-D Audio Amplifier with Current Sense and Real-time Load Diagnostics 数据表 | PDF | HTML | 2026-8-11 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
TAS6684AQ1EVM — TAS6684A-Q1 evaluation module
The TAS6684AQ1EVM showcases the TAS6684A-Q1 four-channel digital input with integrated DSP, closed-loop class-D automotive audio amplifier. The EVM requires the use of the PurePath™ Console (PPC3) graphical user interface (GUI) plug-in for programming the I2C registers settings. This EVM can (...)
TAS6684A-Q1-DESIGN — TAS6684A-Q1 documents
TAS6684AQ1EVM-DOC-CERT — TAS6684AQ1EVM EU Declaration of Conformity (DoC)
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| — (—) | — |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。