主页 微控制器 (MCU) 和处理器 Microcontrollers 通用 MCU
主页
微控制器 (MCU) 和处理器
Microcontrollers
通用 MCU

LM3S308

不推荐用于新设计

Stellaris LM3S 微控制器

立即订购
数据表
LM3S308 不推荐用于新设计
该产品会持续为现有客户提供。新设计应考虑替代产品。
open-in-new 比较替代产品
功能与比较器件相似。
TM4C123GH6PM 正在供货 采用 64 引脚 LQFP 封装、具有 80MHz 频率、256KB 闪存、32KB RAM、2 个 CAN、RTC 和 USB 且基于 Arm Cortex-M4F 的 32 位 MCU The product is an ARM® Cortex™-M4 with comparable peripherals and higher performance.
TM4C1294NCPDT 正在供货 具有 120MHZ 频率、1MB 闪存、256KB RAM、USB 和 ENET MAC+PHY、基于 Arm Cortex-M4F 的 32 位 MCU The product is an ARM® Cortex™-M4 with broader peripherals and higher performance.

LM3S308

不推荐用于新设计
数据表 立即订购

产品详情

CPU Arm Cortex-M3 Frequency (MHz) 25 Flash memory (kByte) 16 RAM (kByte) 4 ADC type 1 10-bit SAR UART 2 CAN (#) 0 PWM (Ch) 0 Security Secure debug SPI 1 USB No Operating temperature range (°C) -40 to 85 Rating Catalog Nonvolatile memory (kByte) 16 Number of GPIOs 28 Number of I2Cs 1
CPU Arm Cortex-M3 Frequency (MHz) 25 Flash memory (kByte) 16 RAM (kByte) 4 ADC type 1 10-bit SAR UART 2 CAN (#) 0 PWM (Ch) 0 Security Secure debug SPI 1 USB No Operating temperature range (°C) -40 to 85 Rating Catalog Nonvolatile memory (kByte) 16 Number of GPIOs 28 Number of I2Cs 1
LQFP (PT) 48 81 mm² (9 mm × 9 mm)

  • 32-bit ARM® Cortex™-M3 25-MHz processor core with System Timer (SysTick), integrated Nested Vectored Interrupt Controller (NVIC), Memory Protection Unit (MPU), and Thumb-2 instruction set

  • Full-featured debug solution with debug access via JTAG and Serial Wire interfaces, and IEEE 1149.1-1990 compliant Test Access Port (TAP) controller

  • 16 KB single-cycle flash and 4 KB single-cycle SRAM

  • 5-28 GPIOs (depending on configuration) with programmable control for GPIO interrupts and pad configuration

  • ARM FiRM-compliant Watchdog Timer ; plus three General-Purpose Timer Modules (GPTM), each of which provides two 16-bit timers/counters and can be configured to operate independently

  • 10-bit Analog-to-Digital Converter (ADC) with eight analog input channels and a sample rate of 500 thousand samples/second

  • Two fully programmable 16C550-type UARTs

  • Synchronous Serial Interface (SSI), supporting operation for Freescale SPI, MICROWIRE, or Texas Instruments synchronous serial interfaces

  • Inter-Integrated Circuit (I2C) Interface, providing Standard (100 Kbps) and Fast (400 Kbps) transmission and support for sending and receiving data as either a master or a slave

  • One integrated analog comparator configurable for output to initiate an ADC sample sequence, drive an output pin or generate an interrupt

  • Industrial and extended temperature RoHS-compliant 48-pin LQFP and 48-pin QFN package

  • 32-bit ARM® Cortex™-M3 25-MHz processor core with System Timer (SysTick), integrated Nested Vectored Interrupt Controller (NVIC), Memory Protection Unit (MPU), and Thumb-2 instruction set

  • Full-featured debug solution with debug access via JTAG and Serial Wire interfaces, and IEEE 1149.1-1990 compliant Test Access Port (TAP) controller

  • 16 KB single-cycle flash and 4 KB single-cycle SRAM

  • 5-28 GPIOs (depending on configuration) with programmable control for GPIO interrupts and pad configuration

  • ARM FiRM-compliant Watchdog Timer ; plus three General-Purpose Timer Modules (GPTM), each of which provides two 16-bit timers/counters and can be configured to operate independently

  • 10-bit Analog-to-Digital Converter (ADC) with eight analog input channels and a sample rate of 500 thousand samples/second

  • Two fully programmable 16C550-type UARTs

  • Synchronous Serial Interface (SSI), supporting operation for Freescale SPI, MICROWIRE, or Texas Instruments synchronous serial interfaces

  • Inter-Integrated Circuit (I2C) Interface, providing Standard (100 Kbps) and Fast (400 Kbps) transmission and support for sending and receiving data as either a master or a slave

  • One integrated analog comparator configurable for output to initiate an ADC sample sequence, drive an output pin or generate an interrupt

  • Industrial and extended temperature RoHS-compliant 48-pin LQFP and 48-pin QFN package

The Stellaris® LM3S308 microcontroller is based on the ARM® Cortex™-M3 controller core operating at up to 25 MHz, with 16 kB flash and 4 kB SRAM. The LM3S308 also features real-time industrial connectivity, with an SSI / SPI controller, an I2C interface, and 2 UARTs. The microcontroller also features intelligent analog capability, including 1 analog comparators and 8 channels of highly accurate 10-bit analog-to-digital conversion - with the ability to sample at speeds of 500K samples per second. Finally, the LM3S308 microcontroller provides a 24-bit systick timer, 3 32-bit or 6 16-bit general-purpose timers, a watchdog timer, a low drop-out voltage regulator so that only one supply voltage is required, brown-out reset, power-on reset controller, and up to 28 GPIOs.

The Stellaris® LM3S308 microcontroller is based on the ARM® Cortex™-M3 controller core operating at up to 25 MHz, with 16 kB flash and 4 kB SRAM. The LM3S308 also features real-time industrial connectivity, with an SSI / SPI controller, an I2C interface, and 2 UARTs. The microcontroller also features intelligent analog capability, including 1 analog comparators and 8 channels of highly accurate 10-bit analog-to-digital conversion - with the ability to sample at speeds of 500K samples per second. Finally, the LM3S308 microcontroller provides a 24-bit systick timer, 3 32-bit or 6 16-bit general-purpose timers, a watchdog timer, a low drop-out voltage regulator so that only one supply voltage is required, brown-out reset, power-on reset controller, and up to 28 GPIOs.
filter 查找其他 通用 MCU
下载

技术文档

未找到结果。请清除搜索并重试。
查看全部 3
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 Stellaris LM3S308 Microcontroller Data Sheet 数据表 (Rev. I) 2014-7-15
* 勘误表 Stellaris LM3S Sandstorm-, Fury-, and DustDevil-Class Microcontrollers Errata 2014-6-26
* 勘误表 ARM Cortex-M3 Errata (r1p0) 2008-10-24

订购和质量