CDC319

正在供货

具有 I2C 控制接口的 1 线路至 10 线路时钟驱动器

立即订购

数据表

document-pdfAcrobat 1-Line To 10-Line Clock Driver 数据表 (Rev. A) (英语)

CDC319

正在供货

数据表

立即订购

产品详情

Number of outputs

10

Core supply voltage (V)

3.3

Output supply voltage (V)

3.3

Output skew (ps)

250

Operating temperature range (°C)

0 to 70

Rating

Catalog

Output type

LVTTL

Input type

LVTTL

Number of outputs

10

Core supply voltage (V)

3.3

Output supply voltage (V)

3.3

Output skew (ps)

250

Operating temperature range (°C)

0 to 70

Rating

Catalog

Output type

LVTTL

Input type

LVTTL

SSOP (DB)

28

79.56 mm² (10.2 mm × 7.8 mm)

High-Speed, Low-Skew 1-to-10 Clock Buffer for SDRAM (Synchronous DRAM) Clock Buffering Applications
Output Skew, t_sk(o), Less Than 250 ps
Pulse Skew, t_sk(p), Less Than 500 ps
Supports up to Two Unbuffered SDRAM DIMMs (Dual Inline Memory Modules)
I²C Serial Interface Provides Individual Enable Control for Each Output
Operates at 3.3 V
Distributed V_CC and Ground Pins Reduce Switching Noise
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015
Packaged in 28-Pin Shrink Small Outline (DB) Package

High-Speed, Low-Skew 1-to-10 Clock Buffer for SDRAM (Synchronous DRAM) Clock Buffering Applications
Output Skew, t_sk(o), Less Than 250 ps
Pulse Skew, t_sk(p), Less Than 500 ps
Supports up to Two Unbuffered SDRAM DIMMs (Dual Inline Memory Modules)
I²C Serial Interface Provides Individual Enable Control for Each Output
Operates at 3.3 V
Distributed V_CC and Ground Pins Reduce Switching Noise
ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015
Packaged in 28-Pin Shrink Small Outline (DB) Package

The CDC319 is a high-performance clock buffer that distributes one input (A) to 10 outputs (Y) with minimum skew for clock distribution. The CDC319 operates from a 3.3-V power supply, and is characterized for operation from 0°C to 70°C.

The device provides a standard mode (100K-bits/s) I²C serial interface for device control. The implementation is as a slave/receiver. The device address is specified in the I²C device address table. Both of the I²C inputs (SDATA and SCLOCK) provide integrated pullup resistors (typically 140 k) and are 5-V tolerant.

Three 8-bit I²C registers provide individual enable control for each of the outputs. All outputs default to enabled at powerup. Each output can be placed in a disabled mode with a low-level output when a low-level control bit is written to the control register. The registers are write only and must be accessed in sequential order (i.e., random access of the registers is not supported).

The CDC319 provides 3-state outputs for testing and debugging purposes. The outputs can be placed in a high-impedance state via the output-enable (OE) input. When OE is high, all outputs are in the operational state. When OE is low, the outputs are placed in a high-impedance state. OE provides an integrated pullup resistor.

The CDC319 is a high-performance clock buffer that distributes one input (A) to 10 outputs (Y) with minimum skew for clock distribution. The CDC319 operates from a 3.3-V power supply, and is characterized for operation from 0°C to 70°C.

The device provides a standard mode (100K-bits/s) I²C serial interface for device control. The implementation is as a slave/receiver. The device address is specified in the I²C device address table. Both of the I²C inputs (SDATA and SCLOCK) provide integrated pullup resistors (typically 140 k) and are 5-V tolerant.

Three 8-bit I²C registers provide individual enable control for each of the outputs. All outputs default to enabled at powerup. Each output can be placed in a disabled mode with a low-level output when a low-level control bit is written to the control register. The registers are write only and must be accessed in sequential order (i.e., random access of the registers is not supported).

The CDC319 provides 3-state outputs for testing and debugging purposes. The outputs can be placed in a high-impedance state via the output-enable (OE) input. When OE is high, all outputs are in the operational state. When OE is low, the outputs are placed in a high-impedance state. OE provides an integrated pullup resistor.

filter

查找其他时钟缓冲器

下载观看带字幕的视频视频