主页 无线连接 远距离低于 1GHz 产品 Sub-1GHz 收发器
主页
无线连接
远距离低于 1GHz 产品
Sub-1GHz 收发器

CC1150

正在供货

适用于低功耗无线应用的高度集成式多通道无线发送器

立即订购
数据表

CC1150

正在供货
立即订购

产品详情

Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, ASK, OOK Frequency bands 300-348, 400-464, 779-928 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, ASK, OOK Frequency bands 300-348, 400-464, 779-928 Type Transmitter TX power (max) (dBm) 10 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
VQFN (RGV) 16 16 mm² (4 mm × 4 mm)
  • Small Size
    • QLP 4-mm × 4-mm Package, 16 Pins
  • True Single Chip UHF RF Transmitter
  • Frequency Bands
    • 300 to 348 MHz
    • 400 to 464 MHz
    • 800 to 928 MHz
  • Programmable Data Rate Up to 500 kBaud
  • Low Current Consumption
  • Programmable Output Power Up to +10 dBm for
    All Supported Frequencies
  • Programmable Baseband Modulator
  • Ideal For Multi-channel Operation
  • Very Few External Components
    • Completely On-chip Frequency Synthesizer
    • No External Filters Needed
  • Configurable Packet Handling Hardware
  • Suitable for Frequency Hopping Systems Due to a
    Fast Settling Frequency Synthesizer
  • Optional Forward Error Correction with Interleaving
  • 64-byte TX Data FIFO
  • Suited for Systems Compliant with EN 300 220
    and FCC CFR Part 15
  • Many Powerful Digital Features Allow a High-
    performance RF system to be made Using an
    Inexpensive Microcontroller
  • Efficient SPI interface: All Registers Can be
    Programmed With One "Burst" Transfer
  • Integrated Analog Temperature Sensor
  • Lead-free “Green” Package
  • Flexible Support for Packet Oriented Systems
    • On-chip Support for Sync-Word Insertion,
      Flexible Packet Length and Automatic CRC
      Handling
  • OOK and Flexible ASK Shaping Supported
  • 2-FSK, GFSK and MSK Supported
  • Optional Automatic Whitening of Data
  • Support for Asynchronous Transparent Transmit
    Mode for Backwards Compatibility with Existing
    Radio Communication Protocols
  • Small Size
    • QLP 4-mm × 4-mm Package, 16 Pins
  • True Single Chip UHF RF Transmitter
  • Frequency Bands
    • 300 to 348 MHz
    • 400 to 464 MHz
    • 800 to 928 MHz
  • Programmable Data Rate Up to 500 kBaud
  • Low Current Consumption
  • Programmable Output Power Up to +10 dBm for
    All Supported Frequencies
  • Programmable Baseband Modulator
  • Ideal For Multi-channel Operation
  • Very Few External Components
    • Completely On-chip Frequency Synthesizer
    • No External Filters Needed
  • Configurable Packet Handling Hardware
  • Suitable for Frequency Hopping Systems Due to a
    Fast Settling Frequency Synthesizer
  • Optional Forward Error Correction with Interleaving
  • 64-byte TX Data FIFO
  • Suited for Systems Compliant with EN 300 220
    and FCC CFR Part 15
  • Many Powerful Digital Features Allow a High-
    performance RF system to be made Using an
    Inexpensive Microcontroller
  • Efficient SPI interface: All Registers Can be
    Programmed With One "Burst" Transfer
  • Integrated Analog Temperature Sensor
  • Lead-free “Green” Package
  • Flexible Support for Packet Oriented Systems
    • On-chip Support for Sync-Word Insertion,
      Flexible Packet Length and Automatic CRC
      Handling
  • OOK and Flexible ASK Shaping Supported
  • 2-FSK, GFSK and MSK Supported
  • Optional Automatic Whitening of Data
  • Support for Asynchronous Transparent Transmit
    Mode for Backwards Compatibility with Existing
    Radio Communication Protocols

The CC1150 is a true single-chip UHF transmitter designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315-, 433-, 868-, and 915-MHz, but can easily be programmed for operation at other frequencies in the 300 to 348 MHz, 400 to 464 MHz and 800 to 928 MHz bands.

The RF transmitter is integrated with a highly configurable baseband modulator. The modulator supports various modulation formats and has a configurable data rate up to 500 kBaud. The CC1150 device provides extensive hardware support for packet handling, data buffering and burst transmissions.

The main operating parameters and the 64-byte transmit FIFO of CC1150 can be controlled via an SPI interface. In a typical system, the CC1150 device will be used together with a microcontroller and a few additional passive components.

CC1150 is part of the SmartRF™ technology platform based on 0.18-µm CMOS technology from Texas Instruments.

The CC1150 is a true single-chip UHF transmitter designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315-, 433-, 868-, and 915-MHz, but can easily be programmed for operation at other frequencies in the 300 to 348 MHz, 400 to 464 MHz and 800 to 928 MHz bands.

The RF transmitter is integrated with a highly configurable baseband modulator. The modulator supports various modulation formats and has a configurable data rate up to 500 kBaud. The CC1150 device provides extensive hardware support for packet handling, data buffering and burst transmissions.

The main operating parameters and the 64-byte transmit FIFO of CC1150 can be controlled via an SPI interface. In a typical system, the CC1150 device will be used together with a microcontroller and a few additional passive components.

CC1150 is part of the SmartRF™ technology platform based on 0.18-µm CMOS technology from Texas Instruments.
filter 查找其他 Sub-1GHz 收发器
下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相似。
CC115L 正在供货 超值系列低于 1GHz 无线发送器 This product has lower performance and costs less.

技术文档

未找到结果。请清除搜索并重试。
查看全部 26
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 CC1150 Low Power Sub-1 GHz RF Transmitter 数据表 (Rev. B) PDF | HTML 2015-3-31
* 勘误表 CC1150 SIlicon Errata (Rev. D) 2015-9-21
* 辐射与可靠性报告 CC1150 Reliability report 2007-7-16
应用手册 DN035 -- Antenna Quick Guide (Rev. B) 2022-2-9
应用手册 Debugging Communication Range (Rev. A) PDF | HTML 2019-5-23
应用手册 DN507 -- FEC Decoding 2019-3-21
应用手册 CRC Implementation (Rev. E) PDF | HTML 2018-9-27
应用手册 AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) 2012-8-2
应用手册 DN025 -- Johanson Technology Matched Balun Filters (Rev. A) 2011-10-13
应用手册 DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) 2011-8-30
应用手册 AN095 -- Continuous Data Streaming Applications - Using Serial Synchronous Mode (Rev. A) 2011-7-18
应用手册 AN058 -- Antenna Selection Guide (Rev. B) 2010-10-6
应用手册 DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary 2010-8-26
应用手册 DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B) 2010-8-17
应用手册 DN500 -- Packet Transmission Basics (Rev. C) 2009-4-6
应用手册 DN501 -- PATABLE Access (Rev. B) 2009-3-24
应用手册 DN300 -- SmartRF04EB Troubleshooting (Rev. B) 2009-3-24
应用手册 DN400 -- Interfacing CC1100 - CC2500 with MSP430 (Rev. A) 2009-3-24
应用手册 AN069 -- Low Cost Long Range One Way Audio Communications at 900 MHz (Rev. B) 2009-3-24
应用手册 DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A) 2008-3-31
应用手册 DN012 -- Programming Output Powers on CC1100 and CC1150 (Rev. A) 2008-1-2
应用手册 DN506 -- GDO Pin Usage (Rev. A) 2007-10-22
应用手册 DN503 -- SPI Access (Rev. B) 2007-10-22
应用手册 DN504 -- FEC Implementation (Rev. A) 2007-10-22
更多文献资料 CC1150 Material content 2007-7-16
更多文献资料 CC1150 RoHS Confirmation 2006-1-31

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

代码示例或演示

SWRC021 — CC1100 CC1101 CC1100E CC2500 Examples Libraries

支持的产品和硬件
支持软件

SWRC046 — SmartRF(TM) Studio 6.13.1

支持的产品和硬件
计算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio 是一款 Windows 应用程序，可帮助射频系统设计人员在所有 TI CC1xxx 和 CC2xxx 低功耗射频器件的设计过程中的早期阶段轻松评估无线电。它简化了配置寄存器值和命令的生成以及射频系统的实际测试和调试。

SmartRF Studio 支持以下 TI 器件：

 

资源

支持的产品和硬件
设计工具

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 器件的硬件设计审查

开始 SimpleLink™ 低于 1GHz 硬件设计审查流程：

  • 第 1 步：在申请审核前，重要的一点是审核相应产品页面上的技术文档和设计与开发资源（请参阅下面的 CC1xxx 产品页面链接）。
  • 第 2 步：下载并填写硬件设计评审申请表。
  • 第 3 步：通过电子邮件将填写好的硬件设计审查申请表和所需文档发送至：connectivity-sub1ghz-hw-review@list.ti.com

在 SimpleLink 硬件设计审查流程中，您可与主题专家一对一沟通，专家会帮您审查设计并提供重要反馈。在此处可找到申请审核的简单 3 步流程以及指向相关技术文档和资源的链接。

申请审查 Sub-1GHz (...)

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
VQFN (RGV) 16 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频