产品详情

Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 300-348, 391-464, 782-928 Type Wireless MCU TX power (max) (dBm) 10 RAM (kByte) 4 Flash memory (kByte) 32 Security Cryptographic acceleration Cryptographic accelerators AES CPU 8051 Peripherals 12-bit ADC 8-channel, 2 SPI, 2 UART, 5 timers, I2S, USB Sensitivity (best) (dBm) -110 Number of GPIOs 21 RX current (lowest) (mA) 16.2 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
Protocols Proprietary Modulation scheme (G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK Frequency bands 300-348, 391-464, 782-928 Type Wireless MCU TX power (max) (dBm) 10 RAM (kByte) 4 Flash memory (kByte) 32 Security Cryptographic acceleration Cryptographic accelerators AES CPU 8051 Peripherals 12-bit ADC 8-channel, 2 SPI, 2 UART, 5 timers, I2S, USB Sensitivity (best) (dBm) -110 Number of GPIOs 21 RX current (lowest) (mA) 16.2 Data rate (max) (Mbps) 0.5 Rating Catalog Operating temperature range (°C) -40 to 85 Edge AI enabled No
VQFN (RHH) 36 36 mm² (6 mm × 6 mm) VQFNP (RSP) 36 36 mm² (6 mm × 6 mm)
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC1101
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (–110 dBm at 1.2 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 10 dBm
      for all supported frequencies
    • Frequency range: 300 – 348 MHz, 391 – 464 MHz
      and 782 – 928 MHz
    • Digital RSSI / LQI support
  • Low Power
    • Low current consumption (RX: 16.2 mA at 1.2 kBaud, TX: 15.2
      mA at −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest
      power consumption)
    • 0.5 µA in PM2 (operating mode with the second lowest power
      consumption, timer or external interrupt wakeup)
    • RoHS Compliant 6 mm × 6 mm QFN-40 Package
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller
      core.
    • Powerful DMA functionality
    • 8/16/32 KB in-system programmable flash, and 1, 2, 4 KB RAM
    • Full-Speed USB Controller with 1 KB FIFO (CC1111Fx)
    • 128-bit AES security coprocessor
    • 7 – 12 bit ADC with up to eight inputs
    • I2S interface
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC1110Fx) or 19 (CC1111Fx) GPIO pins
    • SW compatible with CC2510Fx, CC2511Fx
  • General
    • Wide supply voltage range (2.0V – 3.6V)
    • RoHS compliant 6×6 mm QFN 36 package
  • Radio
    • High-performance RF transceiver based on the
      market-leading CC1101
    • Excellent receiver selectivity and blocking
      performance
    • High sensitivity (–110 dBm at 1.2 kBaud)
    • Programmable data rate up to 500 kBaud
    • Programmable output power up to 10 dBm
      for all supported frequencies
    • Frequency range: 300 – 348 MHz, 391 – 464 MHz
      and 782 – 928 MHz
    • Digital RSSI / LQI support
  • Low Power
    • Low current consumption (RX: 16.2 mA at 1.2 kBaud, TX: 15.2
      mA at −6 dBm output power)
    • 0.3 µA in PM3 (the operating mode with the lowest
      power consumption)
    • 0.5 µA in PM2 (operating mode with the second lowest power
      consumption, timer or external interrupt wakeup)
    • RoHS Compliant 6 mm × 6 mm QFN-40 Package
  • MCU, Memory, and Peripherals
    • High performance and low power 8051 microcontroller
      core.
    • Powerful DMA functionality
    • 8/16/32 KB in-system programmable flash, and 1, 2, 4 KB RAM
    • Full-Speed USB Controller with 1 KB FIFO (CC1111Fx)
    • 128-bit AES security coprocessor
    • 7 – 12 bit ADC with up to eight inputs
    • I2S interface
    • Two USARTs
    • 16-bit timer with DSM mode
    • Three 8-bit timers
    • Hardware debug support
    • 21 (CC1110Fx) or 19 (CC1111Fx) GPIO pins
    • SW compatible with CC2510Fx, CC2511Fx
  • General
    • Wide supply voltage range (2.0V – 3.6V)
    • RoHS compliant 6×6 mm QFN 36 package

The CC1110Fx, CC1111Fx is a true low-power sub- 1 GHz system-on-chip (SoC) designed for low power wireless applications. The CC1110Fx, CC1111Fx combines the excellent performance of the state-of-the-art RF transceiver CC1101 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and up to 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC1110Fx, CC1111Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC1111Fx adds a full-speed USB 2.0 interface to the feature set of the CC1110Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

The CC1110Fx, CC1111Fx is a true low-power sub- 1 GHz system-on-chip (SoC) designed for low power wireless applications. The CC1110Fx, CC1111Fx combines the excellent performance of the state-of-the-art RF transceiver CC1101 with an industry-standard enhanced 8051 MCU, up to 32 kB of in-system programmable flash memory and up to 4 kB of RAM, and many other powerful features. The small 6x6 mm package makes it very suited for applications with size limitations.

The CC1110Fx, CC1111Fx is highly suited for systems where very low power consumption is required. This is ensured by several advanced low-power operating modes. The CC1111Fx adds a full-speed USB 2.0 interface to the feature set of the CC1110Fx. Interfacing to a PC using the USB interface is quick and easy, and the high data rate (12 Mbps) of the USB interface avoids the bottlenecks of RS-232 or low-speed USB interfaces.

下载 观看带字幕的视频 视频

技术文档

未找到结果。请清除搜索并重试。
查看全部 35
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 True System-on-Chip with Low-Power RF Transceiver and 8051 MCU 数据表 (Rev. H) 2013-7-10
* 勘误表 CC1110Fx/CC1111Fx Errata Note (Rev. C) 2012-12-4
应用手册 DN035 -- Antenna Quick Guide (Rev. B) 2022-2-9
应用手册 DN507 -- FEC Decoding 2019-3-21
白皮书 Migrating your proprietary solution to the SimpleLink™ WMCU 2018-11-7
应用手册 CC11xx Sensitivity Versus Frequency Offset and Crystal Accuracy (Rev. D) PDF | HTML 2018-9-27
应用手册 CRC Implementation (Rev. E) PDF | HTML 2018-9-27
应用手册 DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E) 2013-2-22
应用手册 DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A) 2012-3-21
应用手册 DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E) 2012-3-8
应用手册 DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A) 2011-11-7
应用手册 DN025 -- Johanson Technology Matched Balun Filters (Rev. A) 2011-10-13
应用手册 AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A) 2011-9-8
应用手册 DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) 2011-8-30
应用手册 AN099 - Wireless Microphone with USB Interface 2011-6-1
应用手册 AN096 Using CC1190 Front End with CC1101 under FCC 15.247 (Rev. A) 2011-5-2
应用手册 AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220 2011-1-11
应用手册 AN058 -- Antenna Selection Guide (Rev. B) 2010-10-6
应用手册 AN082 -- One Way and Two-Way Audio Communications using the CC1110 or CC2 (Rev. A) 2010-9-30
应用手册 DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary 2010-8-26
应用手册 DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B) 2010-8-17
应用手册 DN505 -- RSSI interpretation and timing (Rev. D) 2010-6-16
应用手册 DN107 -- DMA and Radio Configuration (Rev. A) 2009-12-17
应用手册 DN118 -- Porting SimpliciTI to the SmartRF CCxx10 Target Board 2009-12-1
应用手册 DN117 -- SimpliciTI-compatible UART Driver 2009-9-22
应用手册 AN080 -- LED Lighting with Remote Control using CC2510 and CC1110 2009-9-16
应用手册 DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B) 2009-8-11
应用手册 DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A) 2009-8-11
应用手册 DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices 2009-8-3
应用手册 DN115 -- Using PWM for Dimmer Function in LED Lighting 2009-6-16
应用手册 DN111 - Current Consumption for a Polling Receiver (Rev. A) 2009-3-24
应用手册 DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A) 2008-3-31
应用手册 DN101 -- Using the ADC to Measure Supply Voltage (Rev. A) 2007-10-22
应用手册 DN102 -- SoC Temperature Sensor (Rev. A) 2007-10-22
应用手册 DN504 -- FEC Implementation (Rev. A) 2007-10-22

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

调试探针

CC-DEBUGGER — 用于射频片上系统的调试器和编程器

CC 调试器是用于 TI 低功耗射频片上系统的小型编程器和调试器。它可以与用于 8051(7.51A 或更高版本)的 IAR 嵌入式工作平台一起使用以进行调试,并可与 SmartRF 闪存编程器一起使用以进行闪存编程。CC 调试器还可用于控制 SmartRF Studio 中的所选器件。

支持的产品和硬件
有库存
限制:
??asset.out-of-stock-ti_zh_CN??
无货
代码示例或演示

SWRC085 — CC1110/CC2510 Example Software Supported on IAR Embedded Workbench

支持的产品和硬件
代码示例或演示

SWRC117 — CC1110, CC2510 Basic Software Examples

支持的产品和硬件
固件

SWRC088 — CC USB Firmware Library and Examples

支持的产品和硬件
支持软件

PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1

SmartRF 数据包监听器 2

SmartRF 数据包监听器 2 包括用于采集和显示通过无线电传输的数据包的软件和固件。相应的捕获设备通过 USB 连接至 PC。SmartRF 数据包监听器 2 支持 CC13xx 和 CC26xx 系列器件作为捕获器件,并使用 Wireshark 显示和过滤数据包。下表列出了支持的协议。

SmartRF 数据包监听器 2 包括以下组件:

  • PC 工具(SmartRF 监听器助手),用于配置捕获器件并与之通信
  • 可将 CC13xx 或 CC26xx Launchpad 用作捕获器件的固件
  • 固件源代码
  • 适用于 Wireshark 的解析器(IEEE 802.15.4ge 和 (...)
支持的产品和硬件
支持软件

RF-RANGE-ESTIMATOR — RF Range Estimator

该工具用于完成使用 TI 无线器件的室内和室外射频链路的距离估算。室外计算基于视线 (LOS)。对于室内估算,可以选择介于 Tx 和 Rx 单元之间的建筑材料。Tx 和 Rx 单元之间复合材料的衰减越大,距离就越短。
支持的产品和硬件
计算工具

SMARTRF-STUDIO-7 — SmartRF Studio

SmartRF™ Studio 是一款 Windows 应用程序,可帮助射频系统设计人员在所有 TI CC1xxx 和 CC2xxx 低功耗射频器件的设计过程中的早期阶段轻松评估无线电。它简化了配置寄存器值和命令的生成以及射频系统的实际测试和调试。

SmartRF Studio 支持以下 TI 器件:

 

资源

支持的产品和硬件
设计工具

3P-WIRELESS-MODULES — 第三方无线模块搜索工具

第三方无线模块搜索工具可帮助开发人员识别符合其终端设备规格的产品,并采购可立即投产的无线模块。搜索工具中包含的第三方模块供应商是独立的第三方公司,这些公司在利用 TI 无线连接产品设计和制造无线模块领域拥有深厚的专业知识。

支持的产品和硬件
设计工具

SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 器件的硬件设计审查

开始 SimpleLink™ 低于 1GHz 硬件设计审查流程:

  • 第 1 步:在申请审核前,重要的一点是审核相应产品页面上的技术文档和设计与开发资源(请参阅下面的 CC1xxx 产品页面链接)。
  • 第 2 步:下载并填写硬件设计评审申请表。
  • 第 3 步:通过电子邮件将填写好的硬件设计审查申请表和所需文档发送至:connectivity-sub1ghz-hw-review@list.ti.com

在 SimpleLink 硬件设计审查流程中,您可与主题专家一对一沟通,专家会帮您审查设计并提供重要反馈。在此处可找到申请审核的简单 3 步流程以及指向相关技术文档和资源的链接。

申请审查 Sub-1GHz (...)

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
VQFN (RHH) 36 Ultra Librarian
VQFNP (RSP) 36 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频