홈 모터 드라이버 브러시리스 DC(BLDC) 모터 드라이버 통합 제어 BLDC 드라이버
홈
모터 드라이버
브러시리스 DC(BLDC) 모터 드라이버
통합 제어 BLDC 드라이버

MCT8329A

활성

60V 무센서 사다리꼴 제어 3상 BLDC 게이트 드라이버

지금 주문
데이터 시트

MCT8329A

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Catalog Architecture Gate driver Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 60 Features 120 or 150 degree modulation for improved acoustic performance, Code-free high speed sensorless trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO,OCP,OTW-OTSD,AVS, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Gate driver Control topology Sensorless, Trapezoidal Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 60 Features 120 or 150 degree modulation for improved acoustic performance, Code-free high speed sensorless trapezoidal control, Configurable motor startup and stop options, Fast Deceleration (<150 ms), Fast startup time (<50 ms), Integrated protections UVLO,OCP,OTW-OTSD,AVS, Optional closed loop speed control, Stand-alone operation, Up to 3 kHz (electrical frequency), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
WQFN (REE) 36 20 mm² 4 x 5
  • Three-phase BLDC gate driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports up to 3 kHz (electrical frequency)
    • Very fast startup time (<50 ms)
    • Fast Deceleration (<150 ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Forward and reverse windmilling support
    • Analog, PWM, freq. or I2C based control input
    • Configurable motor startup and stop options
    • Optional closed loop speed or power control, open loop voltage control
    • 5-point configurable reference profile support
    • Anti-voltage surge prevents overvoltage
    • Variable monitoring through DACOUT
  • 65-V Three phase half-bridge gate driver
    • Drives 3 high-side and 3 low-side N-Channel MOSFETs, 4.5 to 60-V operating voltage
    • Supports 100% PWM duty cycle
    • Bootstrap based gate driver architecture
    • 1-A/2-A Maximum peak source/sink current
  • Integrated current sense amplifier
    • Adjustable gain (5, 10, 20, 40 V/V)
  • Low power sleep mode
    • 5-µA (maximum) at VPVDD = 24-V, TA = 25°C
  • Speed loop accuracy: < 3% with internal clock
  • Supports up to 100-kHz PWM frequency
  • Accurate LDO (AVDD) 3.3-V ±3%, 50-mA support with AVDD connected to VREG
  • Independent driver shutdown path (DRVOFF)
  • Spread spectrum for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (3 different types)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface
  • Three-phase BLDC gate driver with integrated sensorless motor control algorithm
    • Code-free high speed Trapezoidal Control
    • Supports up to 3 kHz (electrical frequency)
    • Very fast startup time (<50 ms)
    • Fast Deceleration (<150 ms)
    • Supports 120° or 150° modulation to improve acoustic performance
    • Forward and reverse windmilling support
    • Analog, PWM, freq. or I2C based control input
    • Configurable motor startup and stop options
    • Optional closed loop speed or power control, open loop voltage control
    • 5-point configurable reference profile support
    • Anti-voltage surge prevents overvoltage
    • Variable monitoring through DACOUT
  • 65-V Three phase half-bridge gate driver
    • Drives 3 high-side and 3 low-side N-Channel MOSFETs, 4.5 to 60-V operating voltage
    • Supports 100% PWM duty cycle
    • Bootstrap based gate driver architecture
    • 1-A/2-A Maximum peak source/sink current
  • Integrated current sense amplifier
    • Adjustable gain (5, 10, 20, 40 V/V)
  • Low power sleep mode
    • 5-µA (maximum) at VPVDD = 24-V, TA = 25°C
  • Speed loop accuracy: < 3% with internal clock
  • Supports up to 100-kHz PWM frequency
  • Accurate LDO (AVDD) 3.3-V ±3%, 50-mA support with AVDD connected to VREG
  • Independent driver shutdown path (DRVOFF)
  • Spread spectrum for EMI mitigation
  • Suite of Integrated protection features
    • Supply undervoltage lockout (UVLO)
    • Motor lock detection (3 different types)
    • Overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface

The MCT8329A provides a single-chip, code-free sensorless trapezoidal solution for applications requiring high speed operation or very fast startup time for three phase brushless-DC motors. The device provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The gate drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The MCT8329A can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

Sensorless trapezoidal control is highly configurable through register settings in a non-volatile EEPROM (MCT8329A1I) ranging from motor start-up behavior to closed loop operation, which allows the device to operate stand-alone once it has been configured. Motor current is sensed using an integrated current sensing amplifier supporting single external shunt resistor. The device receives a speed command through a PWM input or analog voltage or variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8329A, intended to protect the device, motor, and system against fault events.

The MCT8329A provides a single-chip, code-free sensorless trapezoidal solution for applications requiring high speed operation or very fast startup time for three phase brushless-DC motors. The device provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The gate drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The MCT8329A can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

Sensorless trapezoidal control is highly configurable through register settings in a non-volatile EEPROM (MCT8329A1I) ranging from motor start-up behavior to closed loop operation, which allows the device to operate stand-alone once it has been configured. Motor current is sensed using an integrated current sensing amplifier supporting single external shunt resistor. The device receives a speed command through a PWM input or analog voltage or variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCT8329A, intended to protect the device, motor, and system against fault events.
filter 기타 통합 제어 BLDC 드라이버 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
MCF8329A 활성 60V 무센서, FOC(자속 기준 제어) 3상 BLDC 게이트 드라이버 FOC version
비교 대상 장치와 유사한 기능
MCT8316A 활성 최대 40V, 8A 피크, 센서드 사다리꼴 제어 3상 BLDC 모터 드라이버 Integrated FETs for up to 70 W of power

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
8개 모두 보기
유형 직함 날짜
* Data sheet MCT8329A High Speed Sensorless Trapezoidal Control Three-phase BLDC Gate Driver datasheet PDF | HTML 2023/01/05
Application note How to Program I2C for MCx83xx Device Family PDF | HTML 2025/03/24
Application note Motor Pre-Startup Tuning for MCx83xx PDF | HTML 2025/03/24
Application note MCF83xx and MCT83xx EEPROM Read and Write Procedure PDF | HTML 2025/03/13
Technical article Selecting the right level of integration to meet motor design requirements PDF | HTML 2024/01/04
Technical article Top 3 ways to reduce audible noise in motion control applications PDF | HTML 2023/12/21
Application brief High-Efficiency Sensorless, Code-Free BLDC Motor Drives for Scalable Systems 2023/05/03
Certificate MCT8329EVM EU RoHS Declaration of Conformity (DoC) 2022/12/16

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

MCT8329EVM — MCT8329 3상 무센서 사다리꼴 BLDC 게이트 드라이버용 평가 모듈

MCT8329는 모터 드라이브 애플리케이션을 위한 코드 없는 무센서 사다리꼴 제어를 지원하는 4.5V~60V, 3상 BLDC 게이트 드라이버 IC입니다. 각각 고압측과 저압측 N-채널 전원 MOSFET를 구동하는 기능을 가진 하프 브리지 게이트 드라이버 3개를 제공합니다.

이 디바이스는 내부 충전 펌프를 사용하여 올바른 게이트 드라이브 전압을 생성하고, 부트스트랩 회로를 사용하여 고압측 MOSFET을 향상시킵니다. 100% 듀티 사이클을 지원하기 위해 세류 충전 펌프가 포함되어 있습니다. 게이트 드라이브 아키텍처는 최대 1A 소스 (...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
평가 모듈(EVM)용 GUI

MCT8329A-GUI — GUI for the MCT8329EVM

GUI used to evaluate MCT8329A on the MCT8329EVM
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
통합 제어 BLDC 드라이버
  • MCT8329A — 60V 무센서 사다리꼴 제어 3상 BLDC 게이트 드라이버
하드웨어 개발
평가 보드
  • MCT8329EVM — MCT8329 3상 무센서 사다리꼴 BLDC 게이트 드라이버용 평가 모듈
시작 다운로드 옵션
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
WQFN (REE) 36 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상