전력 관리 DC/DC 스위칭 레귤레이터 DC/DC 컨트롤러

LM3478Q-Q1

활성

10µA 셧다운 전류를 지원하는 스위칭 레귤레이터용 40V 넓은 입력 전압 범위, 저압측 N 채널 컨트롤러

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
LM5155-Q1 활성 2.2MHz 와이드 VIN, 1.5A MOSFET 드라이버, 비동기 부스트 컨트롤러, AEC-Q100 인증 Up to 2.2-MHz Fsw, higher efficiency and up to 45-V input operating voltage.

제품 상세 정보

Rating Automotive Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 2.97 Vout (max) (V) 500 Vout (min) (V) 1.26 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Light-load efficiency, Nonsynchronous rectification, Prebias startup Duty cycle (max) (%) 100 Iq (typ) (A) 0.0027 Operating temperature range (°C) -40 to 125
Rating Automotive Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 2.97 Vout (max) (V) 500 Vout (min) (V) 1.26 Control mode current mode Features Adjustable current limit, Enable, Frequency synchronization, Light-load efficiency, Nonsynchronous rectification, Prebias startup Duty cycle (max) (%) 100 Iq (typ) (A) 0.0027 Operating temperature range (°C) -40 to 125
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • LM3478Q-Q1 is AEC-Q100 qualified and manufactured on an automotive grade flow
  • 8-lead VSSOP-8
  • Internal push-pull driver with 1A peak current capability
  • Current limit and thermal shutdown
  • Frequency compensation optimized with a capacitor and a resistor
  • Internal soft start
  • Current mode operation
  • Undervoltage lockout with hysteresis
  • Key specifications:
    • Wide supply voltage range of 2.97V to 40V
    • 100kHz to 1MHz adjustable clock frequency
    • ±2.5% (overtemperature) internal reference
    • 10µA shutdown current (overtemperature)
  • Create a custom design using the LM3478Q-Q1 with the WEBENCH Power Designer
  • LM3478Q-Q1 is AEC-Q100 qualified and manufactured on an automotive grade flow
  • 8-lead VSSOP-8
  • Internal push-pull driver with 1A peak current capability
  • Current limit and thermal shutdown
  • Frequency compensation optimized with a capacitor and a resistor
  • Internal soft start
  • Current mode operation
  • Undervoltage lockout with hysteresis
  • Key specifications:
    • Wide supply voltage range of 2.97V to 40V
    • 100kHz to 1MHz adjustable clock frequency
    • ±2.5% (overtemperature) internal reference
    • 10µA shutdown current (overtemperature)
  • Create a custom design using the LM3478Q-Q1 with the WEBENCH Power Designer

The LM3478Q-Q1 is a versatile Low-Side N-Channel MOSFET controller for switching regulators. It is suitable for use in topologies requiring a low side MOSFET, such as boost, flyback, SEPIC, etc. Moreover, the LM3478Q-Q1 can be operated at extremely high switching frequency in order to reduce the overall solution size. The switching frequency of the LM3478Q-Q1 can be adjusted to any value between 100kHz and 1MHz by using a single external resistor. Current mode control provides superior bandwidth and transient response, besides cycle-by-cycle current limiting. Output current can be programmed with a single external resistor.

The LM3478Q-Q1 has built in features such as thermal shutdown, short-circuit protection, over voltage protection, etc. Power saving shutdown mode reduces the total supply current to 5µA and allows power supply sequencing. Internal soft-start limits the inrush current at start-up.

The LM3478Q-Q1 is a versatile Low-Side N-Channel MOSFET controller for switching regulators. It is suitable for use in topologies requiring a low side MOSFET, such as boost, flyback, SEPIC, etc. Moreover, the LM3478Q-Q1 can be operated at extremely high switching frequency in order to reduce the overall solution size. The switching frequency of the LM3478Q-Q1 can be adjusted to any value between 100kHz and 1MHz by using a single external resistor. Current mode control provides superior bandwidth and transient response, besides cycle-by-cycle current limiting. Output current can be programmed with a single external resistor.

The LM3478Q-Q1 has built in features such as thermal shutdown, short-circuit protection, over voltage protection, etc. Power saving shutdown mode reduces the total supply current to 5µA and allows power supply sequencing. Internal soft-start limits the inrush current at start-up.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
2개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet LM3478Q-Q1 High-Efficiency Controller for Boost, SEPIC and Flyback DC-DC Converters datasheet (Rev. A) PDF | HTML 2025/06/02
Application brief Avoiding Pulse Skip Operation at Light Load Conditions for Asynchronous Boost Converter Designs PDF | HTML 2025/09/16

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

계산 툴

FLYBUCK-FLYBACK-DESIGN-CALC Flybuck / Flyback Calculator

This tool helps a power supply engineer to select the right isolated DC-DC topology based on the specifications. Depending on the topology chosen, the calculator also recommends the right IC for the design.

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

LM3478-88-BOOST-CALC LM3478-88 quick start calculator for boost

LM3478-88 quick start calculator for boost topology
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

LM3478-88-FLYBACK-CALC LM3478-88 quick start calculator for Flyback

The LM3478-88 Flyback quick start calculator tool assists in the configuration of the power stage and the external components for the LM3478 and LM3488 devices
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

LM3478-88-SEPIC-CALC LM3478-88 quick start calculator for SEPIC

The LM3478-88 SEPIC quick start calculator tool assists in the configuration of the power stage and the external components for the LM3478 and LM3488.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

레퍼런스 디자인

PMP9382 — 오토모티브 애플리케이션(E-Call)을 위한 고효율 낮은 Vin 30W 부스트 컨버터 레퍼런스 디자인

PMP9382 is a low Vin boost converter utilizing the automotive grade LM3478Q-Q1 controller. This design starts at a diode drop above the minimum input voltage of 2.97V (~3.4V) to a maximum of 6V in.  Once the power supply is enabled and output is present, this design will work down to 2V input (...)
Test report: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
VSSOP (DGK) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상