Startseite Energiemanagement Gate-Treiber Isolierte Gate-Treiber
Startseite
Energiemanagement
Gate-Treiber
Isolierte Gate-Treiber

UCC5871-Q1

AKTIV

Isol. IGBT/SiC-MOSFET-Gate-Treiber, 30 A, 5,7 kV VRMS, für Automobilind., erweit. Schutzfunktionen

Jetzt bestellen
Datenblatt

UCC5871-Q1

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 1 Isolation rating Reinforced Power switch IGBT, SiCFET Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 1500 Transient isolation voltage (VIOTM) (VPK) 8000 Peak output current (A) 30 Peak output current (source) (typ) (A) 30 Peak output current (sink) (typ) (A) 30 Features Active miller clamp, Fault reporting, Programmable dead time, SPI, Short circuit protection, Soft turn-off, Two-level turn-off Output VCC/VDD (min) (V) 15 Output VCC/VDD (max) (V) 30 Input supply voltage (min) (V) 3.3 Input supply voltage (max) (V) 5 Propagation delay time (µs) 0.15 Input threshold CMOS Operating temperature range (°C) -40 to 125 Rating Automotive Bootstrap supply voltage (max) (V) 2121 Rise time (ns) 150 Fall time (ns) 150 Undervoltage lockout (typ) (V) Programmable TI functional safety category Functional Safety-Compliant
Number of channels 1 Isolation rating Reinforced Power switch IGBT, SiCFET Withstand isolation voltage (VISO) (Vrms) 5700 Working isolation voltage (VIOWM) (Vrms) 1500 Transient isolation voltage (VIOTM) (VPK) 8000 Peak output current (A) 30 Peak output current (source) (typ) (A) 30 Peak output current (sink) (typ) (A) 30 Features Active miller clamp, Fault reporting, Programmable dead time, SPI, Short circuit protection, Soft turn-off, Two-level turn-off Output VCC/VDD (min) (V) 15 Output VCC/VDD (max) (V) 30 Input supply voltage (min) (V) 3.3 Input supply voltage (max) (V) 5 Propagation delay time (µs) 0.15 Input threshold CMOS Operating temperature range (°C) -40 to 125 Rating Automotive Bootstrap supply voltage (max) (V) 2121 Rise time (ns) 150 Fall time (ns) 150 Undervoltage lockout (typ) (V) Programmable TI functional safety category Functional Safety-Compliant
SSOP (DWJ) 36 131.84 mm² 12.8 x 10.3
  • Split output driver provides 30-A peak source and 30-A peak sink currents
  • Interlock and shoot-through protection with 150-ns(max) propagation delay and programmable minimum pulse rejection
  • Primary and secondary side active short circuit (ASC) support
  • Configurable power transistor protections
    • DESAT based short circuit protection
    • Shunt resistor based overcurrent and short circuit protection
    • NTC based overtemperature protection
    • Programmable soft turnoff (STO) and two-level turnoff (2LTOFF) during power transistor faults
  • Functional Safety-Compliant
  • Integrated diagnostics:
    • Built-in self test (BIST) for protection comparators
    • IN+ to transistor gate path integrity
    • Power transistor threshold monitoring
    • Internal clock monitoring
    • Fault alarm (nFLT1) and warning (nFLT2) outputs
  • Integrated 4-A active Miller clamp or optional external drive for Miller clamp transistor
  • Advanced high voltage clamping control
  • Internal and external supply undervoltage and overvoltage protection
  • Active output pulldown and default low outputs with low supply or floating inputs
  • Driver die temperature sensing and overtemperature protection
  • 100-kV/µs minimum common mode transient immunity (CMTI) at VCM = 1000 V
  • SPI based device reconfiguration, verification, supervision, and diagnosis
  • Integrated 10-bit ADC for power transistor temperature, voltage, and current monitoring
  • Split output driver provides 30-A peak source and 30-A peak sink currents
  • Interlock and shoot-through protection with 150-ns(max) propagation delay and programmable minimum pulse rejection
  • Primary and secondary side active short circuit (ASC) support
  • Configurable power transistor protections
    • DESAT based short circuit protection
    • Shunt resistor based overcurrent and short circuit protection
    • NTC based overtemperature protection
    • Programmable soft turnoff (STO) and two-level turnoff (2LTOFF) during power transistor faults
  • Functional Safety-Compliant
  • Integrated diagnostics:
    • Built-in self test (BIST) for protection comparators
    • IN+ to transistor gate path integrity
    • Power transistor threshold monitoring
    • Internal clock monitoring
    • Fault alarm (nFLT1) and warning (nFLT2) outputs
  • Integrated 4-A active Miller clamp or optional external drive for Miller clamp transistor
  • Advanced high voltage clamping control
  • Internal and external supply undervoltage and overvoltage protection
  • Active output pulldown and default low outputs with low supply or floating inputs
  • Driver die temperature sensing and overtemperature protection
  • 100-kV/µs minimum common mode transient immunity (CMTI) at VCM = 1000 V
  • SPI based device reconfiguration, verification, supervision, and diagnosis
  • Integrated 10-bit ADC for power transistor temperature, voltage, and current monitoring

The UCC5871-Q1 device is an isolated, highly configurable single-channel gate driver targeted to drive high power SiC MOSFETs and IGBTs in EV/HEV applications. Power transistor protections, such as shunt-resistor–based overcurrent, NTC-based overtemperature, and DESAT detection, include selectable soft turn-off or two-level turn-off during these faults. To further reduce the application size, the UCC5871-Q1 integrates a 4-A active Miller clamp during switching, and an active gate pulldown while the driver is unpowered. An integrated 10-bit ADC enables monitoring of up to six analog inputs and the gate driver temperature for enhanced system management. Diagnostics and detection functions are integrated to simplify the system design. The parameters and thresholds for these features are configurable using the SPI interface, which allows the device to be used with nearly any SiC MOSFET or IGBT.

The UCC5871-Q1 device is an isolated, highly configurable single-channel gate driver targeted to drive high power SiC MOSFETs and IGBTs in EV/HEV applications. Power transistor protections, such as shunt-resistor–based overcurrent, NTC-based overtemperature, and DESAT detection, include selectable soft turn-off or two-level turn-off during these faults. To further reduce the application size, the UCC5871-Q1 integrates a 4-A active Miller clamp during switching, and an active gate pulldown while the driver is unpowered. An integrated 10-bit ADC enables monitoring of up to six analog inputs and the gate driver temperature for enhanced system management. Diagnostics and detection functions are integrated to simplify the system design. The parameters and thresholds for these features are configurable using the SPI interface, which allows the device to be used with nearly any SiC MOSFET or IGBT.
filter Andere Isolierte Gate-Treiber suchen
Herunterladen

Weitere Informationen anfordern

Zum UCC5871-Q1 sind vollständiges Datenblatt, Handbuch zu funktionaler Sicherheit, Bericht, Analysebericht und FIT-Rate sowie FMD- und Pin-FMA-Bericht verfügbar. Jetzt anfordern

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
UCC5880-Q1 AKTIV Isolierter 20-A-IGBT/SiC-MOSFET-Echtzeit-Gate-Treiber mit variabler Stärke für die Automobilindustri Functionally equivalent, two times the analog-to-digital convertor (ADC) channels, 20-A drive strength, CS/DESAT protection on the same pin, smaller package
UCC5881-Q1 AKTIV Isolierter 20-A-IGBT/SiC-MOSFET-Echtzeit-Gate-Treiber mit variabler Stärke für die Automobilindustri UCC5881-Q1 offers 3-level real-time variable gate drive strength for design optimization

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet UCC5871-Q1 30-A Isolated IGBT/SiC MOSFET Gate Driver with Advanced Protection Features for Automotive Applications datasheet PDF | HTML 02 Dez 2022

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​