主页 电源管理 LED 驱动器 背光 LED 驱动器

TPS61158

正在供货

具有集成功率二极管的 30V WLED 驱动器

产品详情

Number of channels 1 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 29 Type Inductive Switching frequency (max) (kHz) 960 Duty cycle (max) (%) 94 LED current per channel (mA) 30 Peak efficiency (%) 94 Topology Boost Features Enable/Shutdown, OVP, PWM control, Soft Start, Thermal shutdown Operating temperature range (°C) -40 to 85 Rating Catalog
Number of channels 1 Vin (min) (V) 2.7 Vin (max) (V) 5.5 Vout (min) (V) 2.7 Vout (max) (V) 29 Type Inductive Switching frequency (max) (kHz) 960 Duty cycle (max) (%) 94 LED current per channel (mA) 30 Peak efficiency (%) 94 Topology Boost Features Enable/Shutdown, OVP, PWM control, Soft Start, Thermal shutdown Operating temperature range (°C) -40 to 85 Rating Catalog
WSON (DRV) 6 4 mm² (2 mm × 2 mm)
  • 2.7-V to 5.5-V Input Voltage Range
  • 28-V Open LED Protection (up to 8 LEDs)
  • Integrated 0.6-A, 30-V Internal Switch FET and
    Power Diode
  • 750-kHz Switching Frequency
  • Flexible Digital and PWM Brightness Control
    • 1-Wire Control Interface (EasyScale™)
    • PWM Dimming Control Interface
  • Up to 100:1 PWM Dimming Ratio
  • Integrated Loop Compensation
  • Built-in Soft Start
  • Built-in WLED Open protection
  • Thermal Shutdown
  • 2.7-V to 5.5-V Input Voltage Range
  • 28-V Open LED Protection (up to 8 LEDs)
  • Integrated 0.6-A, 30-V Internal Switch FET and
    Power Diode
  • 750-kHz Switching Frequency
  • Flexible Digital and PWM Brightness Control
    • 1-Wire Control Interface (EasyScale™)
    • PWM Dimming Control Interface
  • Up to 100:1 PWM Dimming Ratio
  • Integrated Loop Compensation
  • Built-in Soft Start
  • Built-in WLED Open protection
  • Thermal Shutdown

With a 30V-rated integrated switch FET and power diode, the TPS61158 is a boost converter that drives LEDs in series. The boost converter runs at 750-kHz fixed switching frequency to reduce output ripple, improve conversion efficiency, and allows for the use of small external components.

The default white LED current is set with the external sensor resistor RFB, and the feedback voltage is regulated to 200 mV, as shown in Typical Application. During the operation, the LED current can be controlled using the 1-wire digital interface (EasyScale™ protocol) through the CTRL pin. Alternatively, a pulse width modulation (PWM) signal can be applied to the CTRL pin through which the duty cycle determines the feedback reference voltage. In either digital or PWM mode, the TPS61158 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61158 to prevent the output voltage from exceeding the device absolute maximum voltage ratings during open LED conditions.

With a 30V-rated integrated switch FET and power diode, the TPS61158 is a boost converter that drives LEDs in series. The boost converter runs at 750-kHz fixed switching frequency to reduce output ripple, improve conversion efficiency, and allows for the use of small external components.

The default white LED current is set with the external sensor resistor RFB, and the feedback voltage is regulated to 200 mV, as shown in Typical Application. During the operation, the LED current can be controlled using the 1-wire digital interface (EasyScale™ protocol) through the CTRL pin. Alternatively, a pulse width modulation (PWM) signal can be applied to the CTRL pin through which the duty cycle determines the feedback reference voltage. In either digital or PWM mode, the TPS61158 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61158 to prevent the output voltage from exceeding the device absolute maximum voltage ratings during open LED conditions.

下载 观看带字幕的视频 视频

技术文档

未找到结果。请清除搜索并重试。
查看全部 4
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 TPS61158 30-V WLED Driver with Integrated Power Diode 数据表 (Rev. A) PDF | HTML 2015-6-18
白皮书 常见 LED 功能和 LED 驱动器设计注意事项 英语版 2020-9-21
应用手册 Simple Backlight Driver Dimming Performance 2017-3-20
应用手册 Analog PWM Dimming in White-LED Drivers 2016-12-21

设计与开发

如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。

评估模块 (EVM) 用 GUI

SLVC520 — Dimming program for TPS61158EVM-565

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
WSON (DRV) 6 Ultra Librarian

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

所有内容均由 TI 和社区贡献者按“原样”提供,并不构成 TI 规范。请参阅使用条款

如果您对质量、包装或订购 TI 产品有疑问,请参阅 TI 支持。​​​​​​​​​​​​​​

视频