TAS5602
- Supports Multiple Output Configurations
- 2×20-W into a 8-Ω BTL Load at 18 V
- 4×10-W into a 4-Ω SE Load at 18 V
- 2×10W (SE) + 1×20W (BTL) at 18 V
- Thermally Enhanced Package
- DCA (56-pin HTTSOP)
- Wide Voltage Range: 10V—26V
- No Separate Supply Required for Gate Drive
- Efficient Class-D Operation Eliminates Need for Heat Sinks
- Closed Loop Power Stage Architecture
- Improved PSRR Reduces Power Supply Performance Requirements
- High Damping Factor Provides for Tighter, More Accurate Sound With Improved Bass Response
- Constant Output Power Over Variation in Supply Voltage
- Single Ended Inputs
- Integrated Self-Protection Circuits Including Overvoltage, Undervoltage, Overtemperature, and Short Circuit With Error Reporting
- APPLICATIONS
- Flat-Panel, Rear-Projection, and CRT TV
- Consumer Audio Applications
The TAS5602 is a 20-W (per channel) efficient, stereo digital amplifier power stage for driving 4 single-ended speakers, 2 bridge-tied speakers, or combination of single and bridge-tied loads. The TAS5602 can drive a speaker with an impedance as low as 4Ω. The high efficiency of the TAS5602 eliminates the need for an external heat sink.
A simple interface to a digital audio PWM processor is shown below. The TAS5602 is fully protected against faults with short-circuit protection and thermal protection as well as overvoltage and undervoltage protection. Faults are reported back to the processor to prevent devices from being damaged during overload conditions.
技术文档
未找到结果。请清除搜索并重试。
查看全部 1 | 类型 | 标题 | 下载最新的英语版本 | 日期 | |||
|---|---|---|---|---|---|---|
| * | 数据表 | 20W Stereo (BTL) Digital Amplifier Power Stage 数据表 (Rev. B) | 2008年 10月 30日 |
订购和质量
包含信息:
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
包含信息:
- 制造厂地点
- 封装厂地点