主页 音频、触觉与压电 专用音频 IC PWM 调制器
主页
音频、触觉与压电
专用音频 IC
PWM 调制器

TAS5504A

不推荐用于新设计

4 通道数字音频 PWM 处理器

立即订购
数据表
勘误
TAS5504A 不推荐用于新设计
该产品会持续为现有客户提供。新设计应考虑替代产品。
open-in-new 比较替代产品
功能与比较器件相似
TAS5548 正在供货 具有集成 ASRC 和音频处理器的 96KHz PWM 调制器 8 channel, 96KHz, PWM modulator with integrated ASRC & audio processor

TAS5504A

不推荐用于新设计
数据表 立即订购

产品详情

Digital supply (max) (V) 3.6 Digital supply (min) (V) 3 Dynamic range (dB) 102 Operating temperature range (°C) 0 to 70 Rating Catalog
Digital supply (max) (V) 3.6 Digital supply (min) (V) 3 Dynamic range (dB) 102 Operating temperature range (°C) 0 to 70 Rating Catalog
TQFP (PAG) 64 144 mm² 12 x 12
  • Audio Input/Output
    • Automatic Master Clock Rate and Data
      Sample Rate Detection
    • Four Serial Audio Input Channels
    • Four PWM Audio Output Channels
    • Headphone PWM Output to Drive an External
      Differential Amplifier Like the TPA112
    • PWM Outputs Support Single-Ended and
      Bridge-Tied Loads
    • 32-, 38-, 44.1-, 48-, 88.2-, 96-, 176.4-,
      and 192-kHz Sampling Rates
    • Data Formats: 16-, 20-, or 24-Bit Left-Justified,
      I2S, or Right-Justified Input Data
    • 64 × fS Bit-Clock Rate
    • 128, 192, 256, 384, 512, and 768 × fS Master
      Clock Rates (up to a Maximum of 50 MHz)
  • Audio Processing
    • 48-Bit Processing Architecture With 76 Bits
      of Precision for Most Audio-Processing Features
    • Volume Control Range: 36 dB to –109 dB
      • Master Volume Control Range of 18 dB
        to –100 dB
      • Four Individual Channel Volume Control
        Ranges of 18-dB to –109-dB
    • Programmable Soft Volume and Mute Update Rates
    • Two Bass and Treble Tone Controls With ±18-dB Range,
      Selectable Corner Frequencies, and Second-Order Slopes
      • L, R, and C
      • Sub
    • Configurable Loudness Compensation
    • Two Dynamic Range Compressors With Two Thresholds,
      Two Offsets, and Three Slopes
    • Seven Biquads per Channel
    • 8 × 4 Input Crossbar Mixer. Each Signal Processing
      Channel Input Can Be Any Ratio of the Eight Input Channels
    • 4 × 2 Output Mixer – Channels 1 and 2. Each Output
      Can Be Any Ratio of Any Two Signal-Processed Channels.
      It Is Recommended to Use the Pass-Through Output Mixer
      Configuration.
    • 4 × 3 Output Mixer – Channels 3 and 4. Each Output
      Can Be Any Ratio of Any Three Signal-Processed Channels. It Is
      Recommended to Use the Pass-Through Output Mixer Configuration.
    • Three Coefficient Sets Stored on the Device Can Be Selected
      Manually or Automatically (Based on Specific Data Rates)
    • DC Blocking Filters
    • Able to Support a Variety of Bass-Management Algorithms
  • PWM Processing
    • 32-Bit Processing PWM Architecture With
      40 Bits of Precision
    • 8× Oversampling With 5th-Order Noise Shaping at
      32 kHz–48 kHz, 4× Oversampling at 88.2 kHz and 96 kHz,
      and 2× Oversampling at 176.4 kHz and 192 kHz
    • >102-dB Dynamic Range
    • THD+N < 0.1%
    • 20-Hz–20-kHz Flat Noise Floor for 44.1-, 48-,
      88.2-, 96-, 176.4-, and 192-kHz Data Rates
    • Digital De-Emphasis for 32-, 44.1-, and
      48-kHz Data Rates
    • Flexible Automute Logic With Programmable Threshold
      and Duration for Noise-Free Operation
    • Intelligent AM Interference Avoidance
      System Provides Clear AM Reception
    • Power-Supply Volume-Control (PSVC) Support for Enhanced
      Dynamic Range in High-Performance Applications
    • Adjustable Modulation Limit
  • General Features
    • Automated Operation With an Easy-to-Use
      Control Interface
    • I2C Serial Control Slave Interface
    • Integrated AM Interference Avoidance
    • Single 3.3-V Power Supply
    • 64-Pin TQFP Package
    • 5-V Tolerant Inputs
  • Audio Input/Output
    • Automatic Master Clock Rate and Data
      Sample Rate Detection
    • Four Serial Audio Input Channels
    • Four PWM Audio Output Channels
    • Headphone PWM Output to Drive an External
      Differential Amplifier Like the TPA112
    • PWM Outputs Support Single-Ended and
      Bridge-Tied Loads
    • 32-, 38-, 44.1-, 48-, 88.2-, 96-, 176.4-,
      and 192-kHz Sampling Rates
    • Data Formats: 16-, 20-, or 24-Bit Left-Justified,
      I2S, or Right-Justified Input Data
    • 64 × fS Bit-Clock Rate
    • 128, 192, 256, 384, 512, and 768 × fS Master
      Clock Rates (up to a Maximum of 50 MHz)
  • Audio Processing
    • 48-Bit Processing Architecture With 76 Bits
      of Precision for Most Audio-Processing Features
    • Volume Control Range: 36 dB to –109 dB
      • Master Volume Control Range of 18 dB
        to –100 dB
      • Four Individual Channel Volume Control
        Ranges of 18-dB to –109-dB
    • Programmable Soft Volume and Mute Update Rates
    • Two Bass and Treble Tone Controls With ±18-dB Range,
      Selectable Corner Frequencies, and Second-Order Slopes
      • L, R, and C
      • Sub
    • Configurable Loudness Compensation
    • Two Dynamic Range Compressors With Two Thresholds,
      Two Offsets, and Three Slopes
    • Seven Biquads per Channel
    • 8 × 4 Input Crossbar Mixer. Each Signal Processing
      Channel Input Can Be Any Ratio of the Eight Input Channels
    • 4 × 2 Output Mixer – Channels 1 and 2. Each Output
      Can Be Any Ratio of Any Two Signal-Processed Channels.
      It Is Recommended to Use the Pass-Through Output Mixer
      Configuration.
    • 4 × 3 Output Mixer – Channels 3 and 4. Each Output
      Can Be Any Ratio of Any Three Signal-Processed Channels. It Is
      Recommended to Use the Pass-Through Output Mixer Configuration.
    • Three Coefficient Sets Stored on the Device Can Be Selected
      Manually or Automatically (Based on Specific Data Rates)
    • DC Blocking Filters
    • Able to Support a Variety of Bass-Management Algorithms
  • PWM Processing
    • 32-Bit Processing PWM Architecture With
      40 Bits of Precision
    • 8× Oversampling With 5th-Order Noise Shaping at
      32 kHz–48 kHz, 4× Oversampling at 88.2 kHz and 96 kHz,
      and 2× Oversampling at 176.4 kHz and 192 kHz
    • >102-dB Dynamic Range
    • THD+N < 0.1%
    • 20-Hz–20-kHz Flat Noise Floor for 44.1-, 48-,
      88.2-, 96-, 176.4-, and 192-kHz Data Rates
    • Digital De-Emphasis for 32-, 44.1-, and
      48-kHz Data Rates
    • Flexible Automute Logic With Programmable Threshold
      and Duration for Noise-Free Operation
    • Intelligent AM Interference Avoidance
      System Provides Clear AM Reception
    • Power-Supply Volume-Control (PSVC) Support for Enhanced
      Dynamic Range in High-Performance Applications
    • Adjustable Modulation Limit
  • General Features
    • Automated Operation With an Easy-to-Use
      Control Interface
    • I2C Serial Control Slave Interface
    • Integrated AM Interference Avoidance
    • Single 3.3-V Power Supply
    • 64-Pin TQFP Package
    • 5-V Tolerant Inputs

The TAS5504A is a four-channel digital pulse-width modulator (PWM) that provides both advanced performance and a high level of system integration. The TAS5504A is designed to interface seamlessly with most audio digital signal processors. The TAS5504A automatically adjusts control configurations in response to clock and data-rate changes and idle conditions. This enables the TAS5504A to provide an easy-to-use control interface with relaxed timing requirements.

The TAS5504A can drive four channels of H-bridge power stages. Texas Instruments power stages are designed to work seamlessly with the TAS5504A. The TAS5504A supports either the single-ended or bridge-tied-load configuration. The TAS5504A also provides a high-performance differential output to drive an external differential-input analog headphone amplifier, such as the TPA112.

The TAS5504A uses AD modulation operating at a 384-kHz switching rate for 48-, 96-, and
192-kHz data. The 8× oversampling combined with the 5th-order noise shaper provides a broad, flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The TAS5504A is a clocked, slave-only device. The TAS5504A receives MCLK, SCLK, and LRCLK from other system components. The TAS5504A accepts master clock rates of 128, 192, 256, 384, 512, and 768 fS. The TAS5504A accepts a 64-fS bit clock.

The TAS5504A allows for extending the dynamic range by providing a power-supply volume-control (PSVC) output signal.

The TAS5504A is a four-channel digital pulse-width modulator (PWM) that provides both advanced performance and a high level of system integration. The TAS5504A is designed to interface seamlessly with most audio digital signal processors. The TAS5504A automatically adjusts control configurations in response to clock and data-rate changes and idle conditions. This enables the TAS5504A to provide an easy-to-use control interface with relaxed timing requirements.

The TAS5504A can drive four channels of H-bridge power stages. Texas Instruments power stages are designed to work seamlessly with the TAS5504A. The TAS5504A supports either the single-ended or bridge-tied-load configuration. The TAS5504A also provides a high-performance differential output to drive an external differential-input analog headphone amplifier, such as the TPA112.

The TAS5504A uses AD modulation operating at a 384-kHz switching rate for 48-, 96-, and
192-kHz data. The 8× oversampling combined with the 5th-order noise shaper provides a broad, flat noise floor and excellent dynamic range from 20 Hz to 20 kHz.

The TAS5504A is a clocked, slave-only device. The TAS5504A receives MCLK, SCLK, and LRCLK from other system components. The TAS5504A accepts master clock rates of 128, 192, 256, 384, 512, and 768 fS. The TAS5504A accepts a 64-fS bit clock.

The TAS5504A allows for extending the dynamic range by providing a power-supply volume-control (PSVC) output signal.
filter 查找其他 PWM 调制器
下载

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 2
类型 标题 下载最新的英语版本 日期
* 数据表 TAS5504A 4-Channel Digital Audio PWM Processor 数据表 (Rev. B) 2009年 7月 6日
* 勘误表 TAS5504A Errata 2006年 4月 7日

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点