主页 微控制器 (MCU) 和处理器 数字信号处理器 (DSP)
主页
微控制器 (MCU) 和处理器
数字信号处理器 (DSP)

SM320C50-EP

不推荐用于新设计

数字信号处理器（增强型产品）

立即订购
数据表

SM320C50-EP

不推荐用于新设计
数据表 立即订购

产品详情

DSP (max) (MHz) 66, 80 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
DSP (max) (MHz) 66, 80 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
QFP (PQ) 132 768.347775 mm² 27.945 x 27.495
  • Controlled Baseline
    • One Assembly/Test Site, One Fabrication Site
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product Change Notification
  • Qualification Pedigree
  • Military Operating Temperature Range: –55°C to 125°C
  • Industrial Operating Temperature Range: -40°C to 85°C
  • Fast Instruction Cycle Time (30 ns and 40 ns) and 25 ns for Industrial Temp Range
  • Source-Code Compatible With All TMS320C1x and TMS320C2x Devices
  • RAM-Based Operation
    • 9K × 16-Bit Single-Cycle On-Chip Program/Data RAM
    • 1056 × 16-Bit Dual-Access On-Chip Data RAM
  • 2K × 16-Bit On-Chip Boot ROM
  • 224K × 16-Bit Maximum Addressable External Memory Space (64K Program, 64K Data, 64K I/O, and 32K Global)
  • 32-Bit Arithmetic Logic Unit (ALU)
    • 32-bit Accumulator (ACC)
    • 32-Bit Accumulator Buffer (ACCB)
  • 16-Bit Parallel Logic Unit (PLU)
  • 16 × 16-Bit Multiplier, 32-Bit Product
  • 11 Context-Switch Registers
  • Two Buffers for Circular Addressing
  • Full-Duplex Synchronous Serial Port
  • Time-Division Multiplexed Serial Port (TDM)
  • Timer With Control and Counter Registers
  • 16 Software-Programmable Wait-State Generators
  • Divide-by-One Clock Option
  • IEEE 1149.1 Boundary Scan Logic
  • Operations Are Fully Static
  • Enhanced Performance Implanted CMOS (EPIC™) Technology Fabricated by Texas Instruments
  • Packaging
    • 132-Lead Plastic Quad Flat Package (PQ Suffix)

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
EEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture EPIC is a trademark of Texas Instruments. All trademarks are the property of their respective owners.
  • Controlled Baseline
    • One Assembly/Test Site, One Fabrication Site
  • Enhanced Diminishing Manufacturing Sources (DMS) Support
  • Enhanced Product Change Notification
  • Qualification Pedigree
  • Military Operating Temperature Range: –55°C to 125°C
  • Industrial Operating Temperature Range: -40°C to 85°C
  • Fast Instruction Cycle Time (30 ns and 40 ns) and 25 ns for Industrial Temp Range
  • Source-Code Compatible With All TMS320C1x and TMS320C2x Devices
  • RAM-Based Operation
    • 9K × 16-Bit Single-Cycle On-Chip Program/Data RAM
    • 1056 × 16-Bit Dual-Access On-Chip Data RAM
  • 2K × 16-Bit On-Chip Boot ROM
  • 224K × 16-Bit Maximum Addressable External Memory Space (64K Program, 64K Data, 64K I/O, and 32K Global)
  • 32-Bit Arithmetic Logic Unit (ALU)
    • 32-bit Accumulator (ACC)
    • 32-Bit Accumulator Buffer (ACCB)
  • 16-Bit Parallel Logic Unit (PLU)
  • 16 × 16-Bit Multiplier, 32-Bit Product
  • 11 Context-Switch Registers
  • Two Buffers for Circular Addressing
  • Full-Duplex Synchronous Serial Port
  • Time-Division Multiplexed Serial Port (TDM)
  • Timer With Control and Counter Registers
  • 16 Software-Programmable Wait-State Generators
  • Divide-by-One Clock Option
  • IEEE 1149.1 Boundary Scan Logic
  • Operations Are Fully Static
  • Enhanced Performance Implanted CMOS (EPIC™) Technology Fabricated by Texas Instruments
  • Packaging
    • 132-Lead Plastic Quad Flat Package (PQ Suffix)

Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits.
EEE Standard 1149.1-1990 Standard-Test-Access Port and Boundary Scan Architecture EPIC is a trademark of Texas Instruments. All trademarks are the property of their respective owners.

The SM320C50-EP digital signal processor (DSP) is a high-performance, 16-bit, fixed-point processor manufactured in 0.72-µm double-level metal CMOS technology. The C50 is the first DSP from TI designed as a fully static device. Full-static CMOS design contributes to low power consumption while maintaining high performance, making it ideal for applications such as battery-operated communications systems, satellite systems, and advanced control algorithms.

A number of enhancements to the basic C2x architecture give the C50 a minimum 2× performance over the previous generation. A four-deep instruction pipeline, that incorporates delayed branching, delayed call to subroutine, and delayed return from subroutine, allows the C50 to perform instructions in fewer cycles. The addition of a parallel logic unit (PLU) gives the C50 a method for manipulating bits in data memory without using the accumulator and ALU. The C50 has additional shifting and scaling capability for proper alignment of multiplicands or storage of values to data memory.

The C50 achieves its low-power consumption through the IDLE2 instruction. IDLE2 removes the functional clock from the internal hardware of the C50, which puts it into a total-sleep mode that uses only 7 µ:A. A low-logic level on an external interrupt with a duration of at least five clock cycles ends the IDLE2 mode.

The SM320C50-EP is available with a clock speed of 66 MHz providing a 30-ns cycle time and a clock speed of 80 MHz providing a 25-ns cycle time.

The SM320C50-EP digital signal processor (DSP) is a high-performance, 16-bit, fixed-point processor manufactured in 0.72-µm double-level metal CMOS technology. The C50 is the first DSP from TI designed as a fully static device. Full-static CMOS design contributes to low power consumption while maintaining high performance, making it ideal for applications such as battery-operated communications systems, satellite systems, and advanced control algorithms.

A number of enhancements to the basic C2x architecture give the C50 a minimum 2× performance over the previous generation. A four-deep instruction pipeline, that incorporates delayed branching, delayed call to subroutine, and delayed return from subroutine, allows the C50 to perform instructions in fewer cycles. The addition of a parallel logic unit (PLU) gives the C50 a method for manipulating bits in data memory without using the accumulator and ALU. The C50 has additional shifting and scaling capability for proper alignment of multiplicands or storage of values to data memory.

The C50 achieves its low-power consumption through the IDLE2 instruction. IDLE2 removes the functional clock from the internal hardware of the C50, which puts it into a total-sleep mode that uses only 7 µ:A. A low-logic level on an external interrupt with a duration of at least five clock cycles ends the IDLE2 mode.

The SM320C50-EP is available with a clock speed of 66 MHz providing a 30-ns cycle time and a clock speed of 80 MHz providing a 25-ns cycle time.
open-in-new 查找其他 数字信号处理器 (DSP)
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 2
类型 标题 下载最新的英语版本 日期
* 数据表 SM320C50-EP Digital Signal Processor 数据表 (Rev. A) 2005年 11月 30日
* VID SM320C50-EP VID V6203613 2016年 6月 21日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

设计工具

PROCESSORS-3P-SEARCH — 基于 Arm® 的 MPU、基于 Arm 的 MCU 和 DSP 第三方搜索工具

TI 已与多家公司合作，提供各种使用 TI 处理器的软件、工具和 SOM，从而加快您的量产速度。下载此搜索工具，快速浏览我们的第三方解决方案，并寻找合适的第三方来满足您的需求。此处所列的软件、工具和模块由独立的第三方生产和管理，而非德州仪器 (TI)。

搜索工具按产品类型划分为以下类别：

  • 工具包括 IDE/编译器、调试和跟踪、仿真和建模软件以及闪存编程器。
  • 操作系统包括 TI 处理器支持的操作系统。
  • 应用软件是指应用特定的软件，包括在 TI 处理器上运行的中间件和库。
  • SoM 是模块上系统解决方案
下载
封装 引脚 下载
QFP (PQ) 132 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频