产品详情

Frequency (MHz) 8 Nonvolatile memory (kByte) 32 RAM (kByte) 1 ADC type 16-bit Sigma Delta Number of ADC channels 3 Number of GPIOs 14 Features Advanced sensing, LCD UART 1 USB No Number of I2Cs 0 SPI 1 Number of comparator channels 0 Timers - 16-bit 1 Bootloader (BSL) UART Operating temperature range (°C) -40 to 85 Rating Catalog
Frequency (MHz) 8 Nonvolatile memory (kByte) 32 RAM (kByte) 1 ADC type 16-bit Sigma Delta Number of ADC channels 3 Number of GPIOs 14 Features Advanced sensing, LCD UART 1 USB No Number of I2Cs 0 SPI 1 Number of comparator channels 0 Timers - 16-bit 1 Bootloader (BSL) UART Operating temperature range (°C) -40 to 85 Rating Catalog
LQFP (PM) 64 144 mm² 12 x 12
  • Low Supply Voltage Range: 2.7 V to 3.6 V
  • Ultra-Low Power Consumption:
    • Active Mode: 400 µA at 1 MHz, 3 V
    • Standby Mode: 1.6 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Wake up From Standby Mode in Less Than 6 µs
  • Frequency-Locked Loop, FLL+
  • 16-Bit RISC Architecture, 125-ns Instruction Cycle Time
  • Embedded Signal Processing for Single-Phase Energy Metering With Integrated Analog Front End and Temperature Sensor (ESP430CE1)
  • 16-Bit Timer_A With Three Capture/Compare Registers
  • Integrated LCD Driver for 128 Segments
  • Serial Communication Interface (USART), Asynchronous UART or Synchronous SPI Selectable by Software
  • Brownout Detector
  • Supply Voltage Supervisor and Monitor With Programmable Level Detection
  • Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
  • Bootloader (BSL)
  • Family Members Include:
    • MSP430FE423
      8KB + 256 B of Flash Memory, 256 B of RAM
    • MSP430FE425
      16KB + 256 B of Flash Memory, 512 B of RAM
    • MSP430FE427
      32KB + 256 B of Flash Memory, 1KB of RAM
  • Available in 64-Pin Quad Flat Pack (LQFP)
  • Low Supply Voltage Range: 2.7 V to 3.6 V
  • Ultra-Low Power Consumption:
    • Active Mode: 400 µA at 1 MHz, 3 V
    • Standby Mode: 1.6 µA
    • Off Mode (RAM Retention): 0.1 µA
  • Five Power-Saving Modes
  • Wake up From Standby Mode in Less Than 6 µs
  • Frequency-Locked Loop, FLL+
  • 16-Bit RISC Architecture, 125-ns Instruction Cycle Time
  • Embedded Signal Processing for Single-Phase Energy Metering With Integrated Analog Front End and Temperature Sensor (ESP430CE1)
  • 16-Bit Timer_A With Three Capture/Compare Registers
  • Integrated LCD Driver for 128 Segments
  • Serial Communication Interface (USART), Asynchronous UART or Synchronous SPI Selectable by Software
  • Brownout Detector
  • Supply Voltage Supervisor and Monitor With Programmable Level Detection
  • Serial Onboard Programming, No External Programming Voltage Needed, Programmable Code Protection by Security Fuse
  • Bootloader (BSL)
  • Family Members Include:
    • MSP430FE423
      8KB + 256 B of Flash Memory, 256 B of RAM
    • MSP430FE425
      16KB + 256 B of Flash Memory, 512 B of RAM
    • MSP430FE427
      32KB + 256 B of Flash Memory, 1KB of RAM
  • Available in 64-Pin Quad Flat Pack (LQFP)

The TI MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 6 µs.

The MSP430FE42x series are microcontroller configurations with three independent 16-bit sigma-delta ADCs and an embedded signal processor core used to measure and calculate single-phase energy in both 2-wire and 3-wire configurations. Also included are a built-in 16-bit timer, 128-segment LCD drive capability, and 14 I/O pins.

Typical applications include 2-wire and 3-wire single-phase metering including tamper-resistant meter implementations.

The TI MSP430 family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows the device to wake up from low-power modes to active mode in less than 6 µs.

The MSP430FE42x series are microcontroller configurations with three independent 16-bit sigma-delta ADCs and an embedded signal processor core used to measure and calculate single-phase energy in both 2-wire and 3-wire configurations. Also included are a built-in 16-bit timer, 128-segment LCD drive capability, and 14 I/O pins.

Typical applications include 2-wire and 3-wire single-phase metering including tamper-resistant meter implementations.

下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较产品
功能与比较器件相同且具有相同引脚。
MSP430FE427A 正在供货 具有 3 个 16 位 Σ-Δ ADC、128 段 LCD、32KB 闪存和 1KB RAM 的 8MHz 计量 MCU This product has the same memory, peripherals including the sigma-delta ADC(s), and pin-out configuration while incorporating several errata improvements.

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索,并重试。
查看全部 36
类型 项目标题 下载最新的英语版本 日期
* 数据表 MSP430FE42x Mixed-Signal Microcontrollers 数据表 (Rev. D) PDF | HTML 2016年 11月 14日
* 勘误表 MSP430FE427 Device Erratasheet (Rev. J) PDF | HTML 2021年 6月 23日
* 用户指南 MSP430x4xx Family User's Guide (Rev. L) 2017年 12月 12日
更多文献资料 采用 MSP430™ MCU 的锂离子电池充电器解决方案 (Rev. B) PDF | HTML 下载英文版本 (Rev.B) PDF | HTML 2022年 7月 25日
更多文献资料 MSP MCU 上Σ-Δ ADC 的常见问题解答 下载英文版本 PDF | HTML 2021年 10月 20日
更多文献资料 ESD 二极管电流规格 (Rev. B) PDF | HTML 下载英文版本 (Rev.B) PDF | HTML 2021年 9月 20日
用户指南 MSP430™ MCU 开发指南 (Rev. A) PDF | HTML 下载英文版本 (Rev.A) PDF | HTML 2021年 8月 10日
技术文章 A world of possibilities: 5 ways to use MSP430™︎ MCUs in your design 2021年 4月 29日
更多文献资料 MSP430TM 开发手册_MSP430 Hands-on Training (Rev. A) 2020年 10月 20日
更多文献资料 MSP430 Embedded Application Binary Interface (Rev. A) PDF | HTML 2020年 6月 2日
更多文献资料 MSP 代码保护功能 PDF | HTML 下载英文版本 PDF | HTML 2020年 4月 20日
更多文献资料 MSP430™ 系统级 ESD 故障排除指南 PDF | HTML 下载英文版本 PDF | HTML 2020年 4月 20日
更多文献资料 Programming a Flash-Based MSP430 Using the JTAG Interface (Rev. H) 2019年 3月 15日
用户指南 ESP430CE1, ESP430CE1A, ESP430CE1B Peripheral Modules User's Guide (Rev. C) 2018年 10月 18日
更多文献资料 Interfacing the 3-V MSP430 MCU to 5-V Circuits (Rev. A) PDF | HTML 2018年 10月 3日
更多文献资料 MSP430 Flash Memory Characteristics (Rev. B) PDF | HTML 2018年 8月 24日
更多文献资料 Understanding MSP430 Flash Data Retention (Rev. A) PDF | HTML 2018年 8月 24日
更多文献资料 Mixing C and Assembler on MSP430 MCUs (Rev. A) PDF | HTML 2018年 8月 7日
更多文献资料 Using the TPS3619 with MSP430 Microcontrollers Can Reduce Sys Power Consumption (Rev. B) PDF | HTML 2018年 8月 6日
更多文献资料 MSP430 LFXT1 Oscillator Accuracy (Rev. A) 2018年 8月 3日
更多文献资料 Efficient Multiplication and Division Using MSP430 MCUs (Rev. A) 2018年 7月 18日
更多文献资料 CRC Implementation with MSP430 MCUs (Rev. A) 2018年 6月 21日
更多文献资料 Implementing a Direct Thermocouple Interface With MSP430x4xx and ADS1240 (Rev. B) 2018年 5月 29日
更多文献资料 Implementing An Ultra-Low-Power Keypad Interface With MSP430 MCUs (Rev. A) 2018年 5月 22日
更多文献资料 Random Number Generation Using MSP430 MCUs (Rev. A) 2018年 5月 16日
更多文献资料 Wave Digital Filtering Using an MSP430 MCU (Rev. A) 2018年 5月 16日
更多文献资料 MSP430 Software Coding Techniques (Rev. B) 2018年 3月 14日
更多文献资料 MSP430 32-kHz Crystal Oscillators (Rev. D) PDF | HTML 2017年 7月 18日
更多文献资料 Advanced Debugging Using the Enhanced Emulation Module (EEM) With CCS v6 (Rev. F) 2016年 9月 6日
更多文献资料 Designing With MSP430 and Segment LCDs (Rev. A) PDF | HTML 2015年 7月 20日
更多文献资料 使用MSP430™ MCU 和段式LCD 进行设计 下载最新的英文版本 (Rev.A) PDF | HTML 2015年 1月 21日
更多文献资料 Design Considerations When Using the MSP430 Graphics Library 2012年 10月 5日
更多文献资料 MSP430 32kHz 晶体振荡器 (Rev. B) 下载最新的英文版本 (Rev.D) PDF | HTML 2012年 7月 30日
更多文献资料 Power Management Solutions for Ultra-Low-Power 16-Bit MSP430 MCUs (Rev. D) 2012年 3月 28日
更多文献资料 Powering the MSP430 from a High Voltage Input using the TPS62122 (Rev. C) 2012年 1月 12日
更多文献资料 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B) 2010年 6月 14日

设计和开发

如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。

硬件编程工具

MSP-FET — MSP430 闪存仿真工具

**MSP-FET 与 Code Composer Studio v6 及更高版本兼容**

MSP-FET 是一款强大的仿真开发工具(通常称为调试探针),可帮助用户在 MSP 低功耗微控制器 (MCU) 上快速开始应用开发。

创建 MCU 软件通常需要将生成的二进制程序下载到 MSP 器件中,以进行验证和调试。MSP-FET 在主机和目标 MSP 之间提供调试通信通道。此外,MSP-FET 还在计算机的 USB 接口和 MSP UART 之间提供反向通道 UART 连接。这就为 MSP 编程器提供了一种在 MSP 和运行在计算机上的终端之间进行串行通信的便利方法。它还支持使用 (...)

用户指南: PDF | HTML
下载英文版本 (Rev.AH): PDF | HTML
TI.com 上无现货
硬件编程工具

MSP-GANG — MSP-GANG 生产编程器

MSP Gang 编程器 (MSP-GANG) 是一款 MSP430™/MSP432™ 器件编程器,可同时对多达八个完全相同的 MSP430/MSP432 闪存或 FRAM 器件进行编程。此编程器可使用标准的 RS-232 或 USB 接口与主机 PC 相连,并提供灵活的编程选项,允许用户完全自定义流程。

用户指南: PDF | HTML
TI.com 上无现货
软件开发套件 (SDK)

MSPWARE — MSPWare

MSPWare 是一组适用于所有 MSP 器件的用户指南、代码示例、培训以及其他设计资源集合,方便地打包在一起供用户使用,它基本上包含了开发人员要成为 MSP430 和 MSP432 专家所需的一切!除了提供完整的现有 MSP430 和 MSP432 设计资源,MSPWare 还提供多种高度抽象化的软件库,范围涵盖 MSP 驱动程序库或 USB 等特定于器件和外设的库,以及图形库或电容式触控库等特定于应用的库。MSP 驱动程序库是一个尤为重要的库,它可以帮助软件开发人员利用高级别 API 来控制复杂的低级别软件和外设。当前,MSP 驱动程序库支持 MSP430F5x/6x 和 (...)
驱动程序或库

MSP-DSPLIB — 适用于 MSP430 微控制器的数字信号处理 (DSP) 库

德州仪器 (TI) 数字信号处理库是一组经高度优化的函数,可针对 MSP430™ 和 MSP432™ 微控制器对定点数字执行许多常见的信号处理操作。该函数集通常用于实时完成处理密集型转换的应用,可实现最低的功耗和极高的精度。该库可针对定点数学对 MSP 系列固有硬件进行最佳利用,从而实现极大的性能增益。
驱动程序或库

MSP-GRLIB — MSP 图形库

MSP 图形库是一组免专利费的基本图元,用于在基于 MSP430 和 MSP432 微控制器并具有图形显示功能的电路板上创建图形用户界面。该图形库包括两个功能性构建层:显示驱动程序层,特定于所用的显示屏;以及图形基元层,用于绘制点、线、矩形、圆、文本和位图图像。
IDE、配置、编译器或调试器

ENERGYTRACE — EnergyTrace 技术

适用于 MSP430™ MCU、MSP432™ MCU、CC13xx 无线 MCU 和 CC26xx 无线 MCU 的 EnergyTrace™ 软件是一款基于电能的代码分析工具,用于测量和显示应用的电能系统配置并帮助优化应用以实现超低功耗。

大多数开发人员都知道,要在不了解系统状态的情况下对系统进行调整是很困难的。EnergyTrace 软件可为您提供所需的信息,来帮助您实现超低功耗设计。这种反馈有助于轻松实施 MSP 架构涉及的各种技术以及 TI 的许多工具,如 ULP Advisor

该技术实现了一种测量 MCU (...)

用户指南: PDF
下载英文版本 (Rev.AS): PDF
IDE、配置、编译器或调试器

IAR-KICKSTART — IAR Embedded Workbench

IAR Embedded Workbench 提供了一个完整的开发工具链,用于为您选择的目标微控制器构建和调试嵌入式应用。随附的 IAR C/C++ 编译器可为您的应用生成高度优化的代码,而 C-SPY 调试器是一款完全集成的调试器,适用于源代码级调试和反汇编级调试,支持复杂代码和数据断点。

关键组件:

  • 附带项目管理工具和编辑器的集成开发环境。
  • 高度优化 C 和 C++ 编译器。
  • 多文件编译支持。
  • 运行时库。
  • 链接器和库工具。
  • 具有 MSP 仿真器的 IAR C-SPY 调试器,支持在硬件(包括 TI-RTOS)上进行 RTOS 感知调试。
  • MSP-FET 调试器,支持特定 MCU。
  • 支持 (...)
发件人: IAR Systems
用户指南: PDF
下载最新的英文版本 (Rev.AS): PDF
软件编程工具

UNIFLASH — UniFlash 闪存编程工具

UniFlash 是一款软件工具,用于对 TI 微控制器和无线连接器件上的片上闪存以及 TI 处理器的板载闪存进行编程。UniFlash 提供图形界面和命令行界面。

可以在 TI 开发人员专区从云中运行 UniFlash,也可以将其下载并在 Windows®、Linux® 和 macOS® 计算机上使用。

支持的器件:CC13xx、CC25xx、CC26xx、CC32xx、C2000™ 微处理器、MSP430™ 微处理器、MSP432™ 微处理器、MSPM0、TM4C、Hercules™ (...)

支持软件

MSP430x41x, MSP430F42x Code Examples (Rev. P)

SLAC017P.ZIP (246 KB)
设计工具

MSP-3P-SEARCH — MSP 第三方搜索工具

TI 与多家公司携手推出适用于 TI MSP 器件的各种解决方案和服务。这些公司可使用 MSP 器件加速您的量产流程。下载此搜索工具,快速浏览第三方详细信息,并寻找合适的第三方来满足您的需求。

合作伙伴来自不同的地区,他们为不同的应用提供解决方案,如模块、闪存编程和完整解决方案。您可以根据地区、产品或技术需求选择合适的第三方。

该工具分为两大类 - 应用及闪存编程解决方案和服务。

  • 应用包括不同种类的硬件和软件解决方案,例如模块、完整解决方案或软件服务。
  • 闪存编程解决方案包括来自不同国家/地区的编程服务提供商提供的服务。
封装 引脚数 下载
LQFP (PM) 64 了解详情

订购和质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

支持与培训

视频